OpenWrt/LEDE Project

  • Status Unconfirmed
  • Percent Complete
    0%
  • Task Type Bug Report
  • Category Packages
  • Assigned To No-one
  • Operating System All
  • Severity High
  • Priority Very Low
  • Reported Version All
  • Due in Version Undecided
  • Due Date Undecided
  • Private
Attached to Project: OpenWrt/LEDE Project
Opened by Francis - 14.05.2021

FS#3811 - miniupnpd odd behaviour however enabling log_output works

- Device problem occurs on

Fritzbox 7530 ipq40xx / arm_cortex-a7_neon-vfpv4

- Software versions of OpenWrt/LEDE release, packages, etc.
21.02.0-rc1

miniupnpd_2.2.1-1_arm_cortex-a7_neon-vfpv4.ipk

I have a issue with miniupnpd 2.2.1-1 i have tested both OpenWrt 19.07.7 to 21.02.0-rc1 r16046-59980f7aaf via ipq40xx.

When restarting miniupnpd it doesn’t seems to work or opening any ports but gives messages like so:
Fri May 14 09:19:28 2021 daemon.notice miniupnpd[8632]: HTTP listening on port 5000
Fri May 14 09:19:28 2021 daemon.warn miniupnpd[8632]: no HTTP IPv6 address, disabling IPv6
Fri May 14 09:19:28 2021 daemon.notice miniupnpd[8632]: Listening for NAT-PMP/PCP traffic on port 5351

Now however if i enable the debug mode “option log_output ‘1’” and restart miniupnpd is works without issue,

No idea if it affects any other targets but for the fritzbox 7530

Francis commented on 14.05.2021 17:54

Reported via github

When restarting miniupnpd it doesn't seems to work or opening any ports but gives messages like so:
Fri May 14 09:19:28 2021 daemon.notice miniupnpd[8632]: HTTP listening on port 5000
Fri May 14 09:19:28 2021 daemon.warn miniupnpd[8632]: no HTTP IPv6 address, disabling IPv6
Fri May 14 09:19:28 2021 daemon.notice miniupnpd[8632]: Listening for NAT-PMP/PCP traffic on port 5351

Now however if i enable the debug mode "option log_output '1'" and restart miniupnpd is works without issue,

Fri May 14 17:17:47 2021 daemon.info miniupnpd[12908]: HTTP REQUEST from [::ffff:192.168.170.252]:52130 : GET /rootDesc.xml (HTTP/1.1)
Fri May 14 17:17:47 2021 daemon.info miniupnpd[12908]: HTTP REQUEST from [::ffff:192.168.170.252]:49981 : POST /ctl/IPConn (HTTP/1.1)
Fri May 14 17:17:47 2021 daemon.info miniupnpd[12908]: AddPortMapping: ext port 3074 to 192.168.170.252:3074 protocol UDP for: DemonwarePortMapping leaseduration=604800 rhost=
Fri May 14 17:17:47 2021 daemon.info miniupnpd[12908]: updating existing port mapping 3074 UDP (rhost '') ⇒ 192.168.170.252:3074

No idea if it affects any other targets but for the fritzbox 7530. its one of them.

Forgot to mention i not tired the miniupnpd-igdv1_2.2.1-2_arm_cortex-a7_neon-vfpv4.ipk snapshots but will test with another release of the next release.

Loading...

Available keyboard shortcuts

Tasklist

Task Details

Task Editing