You signed in with another tab or window. Reload to refresh your session.You signed out in another tab or window. Reload to refresh your session.You switched accounts on another tab or window. Reload to refresh your session.Dismiss alert
Dear, I 've found an issue with DSA and kernel 5.4.
I'm on 21.02 SNAPSHOT.
My upload speed on WAN is only 10 mbps when a device with LAN connection is linked to 10mbps.
When a device 100mbps is connected to switch all speed is 100mbps not 1 gbps
It seems that the upload speed follow the lowest lan speed...
First test is with 10mbps connection on LAN3. --> Test was done from LAN1 to router.
Second test is with a LAN2 device conneted with 100mbps. --> Test was done from LAN1 to router
I also noticed that with the latest version the switch LEDs flash all together and not only follow where there is communication, but I don't think this is a problem.
Is this speed issue a bug or I do something wrong? I don't make any changes to network config from standard. Only changed IP from 192.168.1.1 to 192.168.181.1.
The text was updated successfully, but these errors were encountered:
pesa1234:
Dear, I 've found an issue with DSA and kernel 5.4.
I'm on 21.02 SNAPSHOT.
My upload speed on WAN is only 10 mbps when a device with LAN connection is linked to 10mbps.
When a device 100mbps is connected to switch all speed is 100mbps not 1 gbps
It seems that the upload speed follow the lowest lan speed...
First test is with 10mbps connection on LAN3. --> Test was done from LAN1 to router.
Second test is with a LAN2 device conneted with 100mbps. --> Test was done from LAN1 to router
PS C:\Users\Andrea\Downloads\iperf-3.1.3-win64> .\iperf3.exe -c 192.168.181.1
Connecting to host 192.168.181.1, port 5201
[ 4] local 192.168.181.159 port 50593 connected to 192.168.181.1 port 5201
[ ID] Interval Transfer Bandwidth
[ 4] 0.00-1.01 sec 384 KBytes 3.12 Mbits/sec
[ 4] 1.01-2.01 sec 640 KBytes 5.26 Mbits/sec
[ 4] 2.01-3.01 sec 1.12 MBytes 9.35 Mbits/sec
[ 4] 3.01-4.01 sec 1.12 MBytes 9.52 Mbits/sec
[ 4] 4.01-5.01 sec 1.12 MBytes 9.41 Mbits/sec
[ 4] 5.01-6.00 sec 1.12 MBytes 9.50 Mbits/sec
[ 4] 6.00-7.00 sec 1.12 MBytes 9.46 Mbits/sec
[ 4] 7.00-8.00 sec 1.12 MBytes 9.41 Mbits/sec
[ 4] 8.00-9.01 sec 1.12 MBytes 9.40 Mbits/sec
[ 4] 9.01-10.01 sec 1.12 MBytes 9.44 Mbits/sec
[ ID] Interval Transfer Bandwidth
[ 4] 0.00-10.01 sec 10.0 MBytes 8.38 Mbits/sec sender
[ 4] 0.00-10.01 sec 9.81 MBytes 8.23 Mbits/sec receiver
iperf Done.
PS C:\Users\Andrea\Downloads\iperf-3.1.3-win64> .\iperf3.exe -c 192.168.181.1 -R
Connecting to host 192.168.181.1, port 5201
Reverse mode, remote host 192.168.181.1 is sending
[ 4] local 192.168.181.159 port 50611 connected to 192.168.181.1 port 5201
[ ID] Interval Transfer Bandwidth
[ 4] 0.00-1.00 sec 95.6 MBytes 802 Mbits/sec
[ 4] 1.00-2.00 sec 97.9 MBytes 821 Mbits/sec
[ 4] 2.00-3.00 sec 101 MBytes 847 Mbits/sec
[ 4] 3.00-4.00 sec 101 MBytes 850 Mbits/sec
[ 4] 4.00-5.00 sec 105 MBytes 884 Mbits/sec
[ 4] 5.00-6.00 sec 92.3 MBytes 774 Mbits/sec
[ 4] 6.00-7.00 sec 105 MBytes 877 Mbits/sec
[ 4] 7.00-8.00 sec 102 MBytes 849 Mbits/sec
[ 4] 8.00-9.00 sec 99.4 MBytes 836 Mbits/sec
[ 4] 9.00-10.00 sec 107 MBytes 894 Mbits/sec
[ ID] Interval Transfer Bandwidth Retr
[ 4] 0.00-10.00 sec 1006 MBytes 844 Mbits/sec 23 sender
[ 4] 0.00-10.00 sec 1006 MBytes 844 Mbits/sec receiver
This new test is with latest 19.07 (previous kernel no dsa)
BusyBox v1.30.1 () built-in shell (ash)
| |.-----.-----.-----.| | | |.----.| |_
| - || _ | -| || | | || || |
|_____|| |||||___||| |____|
|| W I R E L E S S F R E E D O M
OpenWrt 19.07-SNAPSHOT, r11328-81266d9001
root@WRT1900ACS:~# iperf3 -s
Server listening on 5201
Accepted connection from 192.168.181.159, port 48454
[ 5] local 192.168.181.1 port 5201 connected to 192.168.181.159 port 48456
[ ID] Interval Transfer Bitrate
[ 5] 0.00-1.00 sec 108 MBytes 905 Mbits/sec
[ 5] 1.00-2.00 sec 109 MBytes 915 Mbits/sec
[ 5] 2.00-3.00 sec 109 MBytes 914 Mbits/sec
[ 5] 3.00-4.00 sec 107 MBytes 900 Mbits/sec
[ 5] 4.00-5.00 sec 108 MBytes 907 Mbits/sec
[ 5] 5.00-6.00 sec 109 MBytes 912 Mbits/sec
[ 5] 6.00-7.00 sec 107 MBytes 896 Mbits/sec
[ 5] 7.00-8.00 sec 109 MBytes 917 Mbits/sec
[ 5] 8.00-9.00 sec 108 MBytes 905 Mbits/sec
[ 5] 9.00-10.00 sec 108 MBytes 903 Mbits/sec
[ 5] 10.00-10.00 sec 293 KBytes 892 Mbits/sec
[ ID] Interval Transfer Bitrate
[ 5] 0.00-10.00 sec 1.06 GBytes 907 Mbits/sec
I also noticed that with the latest version the switch LEDs flash all together and not only follow where there is communication, but I don't think this is a problem.
Is this speed issue a bug or I do something wrong? I don't make any changes to network config from standard. Only changed IP from 192.168.1.1 to 192.168.181.1.
The text was updated successfully, but these errors were encountered: