We read every piece of feedback, and take your input very seriously.
To see all available qualifiers, see our documentation.
Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.
By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.
Already on GitHub? Sign in to your account
telmich:
Supply the following if possible:
ZBT WG3526
19.07.05
Overall:
If I select the LAN1 on a wg3526 from off to untagged, luci wants to make 2 changes, one of which breaks the configuration:
it renames the network.lan.ifname from eth0.1 to eth0 it changes the switch port configuration (that one was expected)
Removing network.lan.ifname=eth0.1 and replacing it by network.lan.ifname=eth0 breaks networking. Rollback properly works.
After some other changes / manually fixing it, I have the following board.json:
root@router1:~# cat /etc/board.json { "model": { "id": "zbt-wg3526-16M", "name": "ZBT-WG3526 (16M)" }, "switch": { "switch0": { "enable": true, "reset": true, "ports": [ { "num": 0, "role": "lan" }, { "num": 1, "role": "lan" }, { "num": 2, "role": "lan" }, { "num": 3, "role": "lan" }, { "num": 4, "role": "wan" }, { "num": 6, "device": "eth0", "need_tag": false, "want_untag": false } ], "roles": [ { "role": "lan", "ports": "0 1 2 3 6t", "device": "eth0.1" }, { "role": "wan", "ports": "4 6t", "device": "eth0.2" } ] } }, "network": { "lan": { "ifname": "eth0.1", "protocol": "static", "macaddr": "f8:5e:3c:11:db:7c" }, "wan": { "ifname": "eth0.2", "protocol": "dhcp", "macaddr": "f8:5e:3c:11:db:7d" } } }
The text was updated successfully, but these errors were encountered:
No branches or pull requests
telmich:
Supply the following if possible:
ZBT WG3526
19.07.05
Overall:
If I select the LAN1 on a wg3526 from off to untagged, luci wants to make 2 changes, one of which breaks the configuration:
Removing network.lan.ifname=eth0.1 and replacing it by network.lan.ifname=eth0 breaks networking. Rollback properly works.
After some other changes / manually fixing it, I have the following board.json:
root@router1:~# cat /etc/board.json { "model": { "id": "zbt-wg3526-16M", "name": "ZBT-WG3526 (16M)" }, "switch": { "switch0": { "enable": true, "reset": true, "ports": [ { "num": 0, "role": "lan" }, { "num": 1, "role": "lan" }, { "num": 2, "role": "lan" }, { "num": 3, "role": "lan" }, { "num": 4, "role": "wan" }, { "num": 6, "device": "eth0", "need_tag": false, "want_untag": false } ], "roles": [ { "role": "lan", "ports": "0 1 2 3 6t", "device": "eth0.1" }, { "role": "wan", "ports": "4 6t", "device": "eth0.2" } ] } }, "network": { "lan": { "ifname": "eth0.1", "protocol": "static", "macaddr": "f8:5e:3c:11:db:7c" }, "wan": { "ifname": "eth0.2", "protocol": "dhcp", "macaddr": "f8:5e:3c:11:db:7d" } } }
The text was updated successfully, but these errors were encountered: