OpenWrt/LEDE Project

  • Status Unconfirmed
  • Percent Complete
    0%
  • Task Type Bug Report
  • Category Base system
  • Assigned To No-one
  • Operating System All
  • Severity Critical
  • Priority Very Low
  • Reported Version Trunk
  • Due in Version Undecided
  • Due Date Undecided
  • Private
Attached to Project: OpenWrt/LEDE Project
Opened by Reimu NotMoe - 29.12.2020

FS#3544 - 5GHz band of several ath10k devices are completely unusable

- Device: Custom router board with mini PCIE slots
- Software version: OpenWrt SNAPSHOT r0-7e4585e
- Steps to reproduce:
* Git clone https://github.com/openwrt/openwrt then build with default configuration + enable ath10k & fw.
* Install an ath10k card (tested: QCA9880, QCA6174) on router board, and flash image to device.
* Run `iw list` and every 5GHz band is disabled.

Changing country code via LuCI and `iw reg set` won’t help.

Using ath10k-ct won’t help as well.

ath9k is not affected.

Logs are in attachments.

Reimu NotMoe commented on 29.12.2020 12:18

Update: RTL8821AE 5GHz works as well.

It seems that only ath10k is affected.

Loading...

Available keyboard shortcuts

Tasklist

Task Details

Task Editing