Skip to content
New issue

Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.

By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.

Already on GitHub? Sign in to your account

FS#3450 - AC2100 MT7621 eth0 (mtk_soc_eth): transmit queue 0 timed out #8321

Open
openwrt-bot opened this issue Nov 14, 2020 · 19 comments
Open
Labels
flyspray kernel pull request/issue with Linux kernel related changes release/19.07 pull request/issue targeted (also) for OpenWrt 19.07 release

Comments

@openwrt-bot
Copy link

figeac888:

Model Xiaomi Mi Router AC2100
Architecture MediaTek MT7621 ver:1 eco:3
Firmware Version OpenWrt 19.07.4 r11208-ce6496d796 / LuCI openwrt-19.07 branch git-20.247.75781-0d0ab01
Kernel Version 4.14.195

Random BUG, no step to reproduce it exactly
Impact : Outage for few seconds, connectivity lost
Full log attached.

Regards

@openwrt-bot
Copy link
Author

figeac888:

Sun Nov 15 13:40:27 2020 kern.warn kernel: [34514.700764] ------------[ cut here ]------------
Sun Nov 15 13:40:27 2020 kern.warn kernel: [34514.705405] WARNING: CPU: 0 PID: 0 at net/sched/sch_generic.c:320 0x8038c0d0
Sun Nov 15 13:40:27 2020 kern.info kernel: [34514.712448] NETDEV WATCHDOG: eth0 (mtk_soc_eth): transmit queue 0 timed out
Sun Nov 15 13:40:27 2020 kern.warn kernel: [34514.719382] Modules linked in: pppoe ppp_async pppox ppp_generic nf_conntrack_ipv6 mt7615e mt7603e mt76 mac80211 iptable_nat ipt_REJECT ipt_MASQUERADE cfg80211 xt_time xt_tcpudp xt_state xt_nat xt_multiport xt_mark xt_mac xt_limit xt_conntrack xt_comment xt_TCPMSS xt_REDIRECT xt_LOG xt_FLOWOFFLOAD xt_CT slhc nf_reject_ipv4 nf_nat_redirect nf_nat_masquerade_ipv4 nf_conntrack_ipv4 nf_nat_ipv4 nf_nat nf_log_ipv4 nf_flow_table_hw nf_flow_table nf_defrag_ipv6 nf_defrag_ipv4 nf_conntrack_rtcache nf_conntrack iptable_mangle iptable_filter ip_tables crc_ccitt compat nf_log_ipv6 nf_log_common ip6table_mangle ip6table_filter ip6_tables ip6t_REJECT x_tables nf_reject_ipv6 tun leds_gpio gpio_button_hotplug
Sun Nov 15 13:40:27 2020 kern.warn kernel: [34514.780880] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 4.14.195 #0
Sun Nov 15 13:40:28 2020 kern.warn kernel: [34514.786953] Stack : 00000000 00000000 00000000 87415340 00000000 00000000 00000000 00000000
Sun Nov 15 13:40:28 2020 kern.warn kernel: [34514.795297] 00000000 00000000 00000000 00000000 00000000 00000001 87c09d60 1cc28223
Sun Nov 15 13:40:28 2020 kern.warn kernel: [34514.803640] 87c09df8 00000000 00000000 00005840 00000038 8049c858 00000008 00000000
Sun Nov 15 13:40:28 2020 kern.warn kernel: [34514.811972] 00000000 80550000 000bea50 00000000 87c09d40 00000000 00000000 8050aed8
Sun Nov 15 13:40:28 2020 kern.warn kernel: [34514.820304] 8038c0d0 00000140 00000000 87415340 00000000 802ad210 00000000 806b0000
Sun Nov 15 13:40:28 2020 kern.warn kernel: [34514.828636] ...
Sun Nov 15 13:40:28 2020 kern.warn kernel: [34514.831071] Call Trace:
Sun Nov 15 13:40:28 2020 kern.warn kernel: [34514.831112] [<8049c858>] 0x8049c858
Sun Nov 15 13:40:28 2020 kern.warn kernel: [34514.837007] [<8038c0d0>] 0x8038c0d0
Sun Nov 15 13:40:28 2020 kern.warn kernel: [34514.840479] [<802ad210>] 0x802ad210
Sun Nov 15 13:40:28 2020 kern.warn kernel: [34514.843950] [<8000c1a0>] 0x8000c1a0
Sun Nov 15 13:40:28 2020 kern.warn kernel: [34514.847419] [<8000c1a8>] 0x8000c1a8
Sun Nov 15 13:40:28 2020 kern.warn kernel: [34514.850890] [<804856b4>] 0x804856b4
Sun Nov 15 13:40:28 2020 kern.warn kernel: [34514.854360] [<80071ab0>] 0x80071ab0
Sun Nov 15 13:40:28 2020 kern.warn kernel: [34514.857830] [<8002e608>] 0x8002e608
Sun Nov 15 13:40:28 2020 kern.warn kernel: [34514.861301] [<8038c0d0>] 0x8038c0d0
Sun Nov 15 13:40:28 2020 kern.warn kernel: [34514.864772] [<8002e690>] 0x8002e690
Sun Nov 15 13:40:28 2020 kern.warn kernel: [34514.868241] [<8038c0d0>] 0x8038c0d0
Sun Nov 15 13:40:28 2020 kern.warn kernel: [34514.871712] [<80099a00>] 0x80099a00
Sun Nov 15 13:40:28 2020 kern.warn kernel: [34514.875183] [<8038bf24>] 0x8038bf24
Sun Nov 15 13:40:28 2020 kern.warn kernel: [34514.878653] [<80088568>] 0x80088568
Sun Nov 15 13:40:28 2020 kern.warn kernel: [34514.882131] [<80088824>] 0x80088824
Sun Nov 15 13:40:28 2020 kern.warn kernel: [34514.885608] [<80079158>] 0x80079158
Sun Nov 15 13:40:28 2020 kern.warn kernel: [34514.889080] [<804a3658>] 0x804a3658
Sun Nov 15 13:40:28 2020 kern.warn kernel: [34514.892553] [<80032fb4>] 0x80032fb4
Sun Nov 15 13:40:28 2020 kern.warn kernel: [34514.896024] [<8025a5f0>] 0x8025a5f0
Sun Nov 15 13:40:28 2020 kern.warn kernel: [34514.899494] [<80007488>] 0x80007488
Sun Nov 15 13:40:28 2020 kern.warn kernel: [34514.902962]
Sun Nov 15 13:40:28 2020 kern.warn kernel: [34514.904558] ---[ end trace 3a20dcaf232c6cbd ]---
Sun Nov 15 13:40:28 2020 kern.err kernel: [34514.909167] mtk_soc_eth 1e100000.ethernet eth0: transmit timed out
Sun Nov 15 13:40:28 2020 kern.info kernel: [34514.915361] mtk_soc_eth 1e100000.ethernet eth0: dma_cfg:80000065
Sun Nov 15 13:40:28 2020 kern.info kernel: [34514.921374] mtk_soc_eth 1e100000.ethernet eth0: tx_ring=0, base=072d0000, max=0, ctx=3353, dtx=3353, fdx=3232, next=3353
Sun Nov 15 13:40:28 2020 kern.info kernel: [34514.932219] mtk_soc_eth 1e100000.ethernet eth0: rx_ring=0, base=05870000, max=0, calc=3447, drx=3474
Sun Nov 15 13:40:28 2020 kern.info kernel: [34514.946271] mtk_soc_eth 1e100000.ethernet: 0x100 = 0x6060000c, 0x10c = 0x80818
Sun Nov 15 13:40:28 2020 kern.info kernel: [34514.959173] mtk_soc_eth 1e100000.ethernet: PPE started

@openwrt-bot
Copy link
Author

db260179:

As it stands this openwrt version v19.07.4 still doesnt have this patch

https://git.openwrt.org/?p=openwrt/openwrt.git;a=commit;h=34a96529041d4e9502c490c66f8af0154187c6d2

Added in the latest v19.07 branch - should be in the next stable release v19.07.5

And this patch - https://git.openwrt.org/?p=openwrt/openwrt.git;a=commit;h=c8f8e59816eca49d776562d2d302bf990a87faf0

Helps this situation as well.

@openwrt-bot
Copy link
Author

figeac888:

Thank you

@openwrt-bot
Copy link
Author

gregd72002:

I recompiles v19.07.4 using the patch above and the error appeared again:

[12242.541122] ------------[ cut here ]------------
[12242.545762] WARNING: CPU: 2 PID: 0 at net/sched/sch_generic.c:320 0x8038c0e0
[12242.552832] NETDEV WATCHDOG: eth0 (mtk_soc_eth): transmit queue 0 timed out
[12242.559762] Modules linked in: pppoe ppp_async pppox ppp_generic pl2303 nf_conntrack_ipv6 mt76x2e mt76x2_common mt76x02_lib mt7603e mt76 mac80211 iptable_nat ipt_REJECT ipt_MASQUERADE ftdi_sio cfg80211 xt_time xt_tcpudp xt_state xt_nat xt_multiport xt_mark xt_mac xt_limit xt_conntrack xt_comment xt_TCPMSS xt_REDIRECT xt_LOG xt_FLOWOFFLOAD xt_CT usbserial slhc nf_reject_ipv4 nf_nat_redirect nf_nat_masquerade_ipv4 nf_conntrack_ipv4 nf_nat_ipv4 nf_nat nf_log_ipv4 nf_flow_table_hw nf_flow_table nf_defrag_ipv6 nf_defrag_ipv4 nf_conntrack_rtcache nf_conntrack iptable_mangle iptable_filter ip_tables crc_ccitt compat nf_log_ipv6 nf_log_common ip6table_mangle ip6table_filter ip6_tables ip6t_REJECT x_tables nf_reject_ipv6 tun mmc_block mtk_sd mmc_core leds_gpio xhci_plat_hcd xhci_pci xhci_mtk xhci_hcd gpio_button_hotplug
[12242.631563] usbcore nls_base usb_common
[12242.635495] CPU: 2 PID: 0 Comm: swapper/2 Not tainted 4.14.195 #0
[12242.641563] Stack : 00000000 00000000 00000000 8fddc040 00000000 00000000 00000000 00000000
[12242.649900] 00000000 00000000 00000000 00000000 00000000 00000001 8fc0dd60 ac07f5da
[12242.658232] 8fc0ddf8 00000000 00000000 00005eb0 00000038 8049c858 00000007 00000000
[12242.666566] 00000000 80550000 0009b267 00000000 8fc0dd40 00000000 00000000 8050aed8
[12242.674900] 8038c0e0 00000140 00000002 8fddc040 00000000 802ad210 00000008 806b0008
[12242.683234] ...
[12242.685670] Call Trace:
[12242.685724] [<8049c858>] 0x8049c858
[12242.691630] [<8038c0e0>] 0x8038c0e0
[12242.695107] [<802ad210>] 0x802ad210
[12242.698585] [<8000c1a0>] 0x8000c1a0
[12242.702062] [<8000c1a8>] 0x8000c1a8
[12242.705534] [<804856c4>] 0x804856c4
[12242.709003] [<80071ab0>] 0x80071ab0
[12242.712482] [<8002e608>] 0x8002e608
[12242.715955] [<8038c0e0>] 0x8038c0e0
[12242.719433] [<8002e690>] 0x8002e690
[12242.722913] [<8e940104>] 0x8e940104 [mt76x02_lib@8e940000+0x96c0]
[12242.728998] [<8038c0e0>] 0x8038c0e0
[12242.732480] [<8038bf34>] 0x8038bf34
[12242.735952] [<80088568>] 0x80088568
[12242.739421] [<8025b0e0>] 0x8025b0e0
[12242.742896] [<80088824>] 0x80088824
[12242.746370] [<80079158>] 0x80079158
[12242.749845] [<804a3658>] 0x804a3658
[12242.753319] [<80032fb4>] 0x80032fb4
[12242.756790] [<8025a5f0>] 0x8025a5f0
[12242.760265] [<80007488>] 0x80007488
[12242.763736]
[12242.765332] ---[ end trace 032a77caa8122fc8 ]---
[12242.769948] mtk_soc_eth 1e100000.ethernet eth0: transmit timed out
[12242.776132] mtk_soc_eth 1e100000.ethernet eth0: dma_cfg:80000067
[12242.782157] mtk_soc_eth 1e100000.ethernet eth0: tx_ring=0, base=0ec20000, max=0, ctx=159, dtx=3726, fdx=3726, next=159
[12242.792853] mtk_soc_eth 1e100000.ethernet eth0: rx_ring=0, base=0e1c0000, max=0, calc=2088, drx=2089
[12243.205394] mtk_soc_eth 1e100000.ethernet: 0x100 = 0x5960000c, 0x10c = 0x80818
[12243.218367] mtk_soc_eth 1e100000.ethernet: PPE started
[12330.537877] mtk_soc_eth 1e100000.ethernet eth0: transmit timed out
[12330.544073] mtk_soc_eth 1e100000.ethernet eth0: dma_cfg:80000067
[12330.550112] mtk_soc_eth 1e100000.ethernet eth0: tx_ring=0, base=0d800000, max=0, ctx=3072, dtx=0, fdx=0, next=3072
[12330.560464] mtk_soc_eth 1e100000.ethernet eth0: rx_ring=0, base=0ece0000, max=0, calc=2126, drx=2127
[12330.978048] mtk_soc_eth 1e100000.ethernet: 0x100 = 0x4e60060c, 0x10c = 0x80818
[12330.991229] mtk_soc_eth 1e100000.ethernet: PPE started
root@OpenWrt:# cat /proc/uptime
12400.04 49269.16
root@OpenWrt:
# ping 8.8.8.8
PING 8.8.8.8 (8.8.8.8): 56 data bytes
^C
--- 8.8.8.8 ping statistics ---
3 packets transmitted, 0 packets received, 100% packet loss
root@OpenWrt:~# reboot

Router: ZBT-WE1326

LAN & WAN connectivity was lost but wifi worked.

@openwrt-bot
Copy link
Author

db260179:

@gregoryd Try my https://gitlab.com/db260179/xiaomi-m4a stable branch

Just add your own .config to build for this router, as my changes are specific to the mt7530 and mt76 driver fixes which are generic and might fix your issues.

If it does, i can then try and get them added to the v19.07 branch for future fixes.

@openwrt-bot
Copy link
Author

gregd72002:

thanks, I will certainly try it as this issue drives me crazy. It happened again just now

@openwrt-bot
Copy link
Author

gregd72002:

@db260179

I dont think this resolves the problem. I've got the problem 2 times in the last 3h.
See dmesg.

@openwrt-bot
Copy link
Author

db260179:

Ok so looking at your log, your ethernet is going up and down alot, indicates a few things here.

Bad network cables, poor psu not giving enough power.

Other possibles are an unknown bug for this device, have you tried older v19.07 versions say v19.07.3?

The kernel module crashing is a side effect of some sort of load or connection issue happening.

@openwrt-bot
Copy link
Author

figeac888:

@db260179

On my side, I didn't have this issue on v19.07.3.

@openwrt-bot
Copy link
Author

gregd72002:

I moved back to 19.07.3 too. So far so good.
@db260179 As for the bad network cable, it was indeed not plugged in properly.

@openwrt-bot
Copy link
Author

mrakotiq:

probably same issue like:
https://bugs.openwrt.org/index.php?do=details&task_id=2628

@openwrt-bot
Copy link
Author

gregd72002:

A bit of a success - I tried all possible versions v19.07.1 - v19.07.4 and I experienced the issue in all of them daily.

Since, I moved to snapshot (OpenWrt SNAPSHOT r15165-66d12ce667, kernel: 5.4.81), the router has been stable for 5 days so far - longest I can remember

13 Dec: tried also 19.07.5 just out of curiosity - same issue. I'm reverting to snapshot again.

@openwrt-bot
Copy link
Author

idoo:

@gregory D where did you get that snapshot? same issue here on 19.07.5

Xiaomi Mi Router 3G, OpenWrt 19.07.5 r11257-5090152ae3
Tue Dec 15 14:21:48 2020 kern.warn kernel: [ 128.078155] ------------[ cut here ]------------
Tue Dec 15 14:21:48 2020 kern.warn kernel: [ 128.082799] WARNING: CPU: 2 PID: 0 at net/sched/sch_generic.c:320 0x8038d150
Tue Dec 15 14:21:48 2020 kern.info kernel: [ 128.089852] NETDEV WATCHDOG: eth0 (mtk_soc_eth): transmit queue 0 timed out
Tue Dec 15 14:21:48 2020 kern.warn kernel: [ 128.096782] Modules linked in: pppoe ppp_async pppox ppp_generic nf_conntrack_ipv6 mt76x2e mt76x2_common mt76x02_lib mt7603e mt76 mac80211 iptable_nat ipt_REJECT ipt_MASQUERADE cfg80211 xt_time xt_tcpudp xt_tcpmss xt_statistic xt_state xt_recent xt_nat xt_multiport xt_mark xt_mac xt_limit xt_length xt_hl xt_helper xt_ecn xt_dscp xt_conntrack xt_connmark xt_connlimit xt_connbytes xt_comment xt_TCPMSS xt_REDIRECT xt_LOG xt_HL xt_FLOWOFFLOAD xt_DSCP xt_CT xt_CLASSIFY slhc nf_reject_ipv4 nf_nat_redirect nf_nat_masquerade_ipv4 nf_conntrack_ipv4 nf_nat_ipv4 nf_nat nf_log_ipv4 nf_flow_table_hw nf_flow_table nf_defrag_ipv6 nf_defrag_ipv4 nf_conntrack_rtcache iptable_raw iptable_mangle iptable_filter ipt_ECN ip_tables crc_ccitt compat sch_cake nf_conntrack sch_tbf sch_ingress sch_htb sch_hfsc em_u32 cls_u32
Tue Dec 15 14:21:48 2020 kern.warn kernel: [ 128.167462] cls_tcindex cls_route cls_matchall cls_fw cls_flow cls_basic act_skbedit act_mirred ledtrig_usbport nf_log_ipv6 nf_log_common ip6table_mangle ip6table_filter ip6_tables ip6t_REJECT x_tables nf_reject_ipv6 ifb leds_gpio xhci_plat_hcd xhci_pci xhci_mtk xhci_hcd gpio_button_hotplug usbcore nls_base usb_common
Tue Dec 15 14:21:48 2020 kern.warn kernel: [ 128.195777] CPU: 2 PID: 0 Comm: swapper/2 Not tainted 4.14.209 #0
Tue Dec 15 14:21:48 2020 kern.warn kernel: [ 128.201848] Stack : 00000000 00000000 00000000 8fe68f40 00000000 00000000 00000000 00000000
Tue Dec 15 14:21:48 2020 kern.warn kernel: [ 128.210184] 00000000 00000000 00000000 00000000 00000000 00000001 8fc0dd60 1cc28231
Tue Dec 15 14:21:48 2020 kern.warn kernel: [ 128.218517] 8fc0ddf8 00000000 00000000 00006080 00000038 8049da98 00000008 00000000
Tue Dec 15 14:21:48 2020 kern.warn kernel: [ 128.226849] 00000000 80550000 0002fcc1 00000000 8fc0dd40 00000000 00000000 8050c4d4
Tue Dec 15 14:21:48 2020 kern.warn kernel: [ 128.235181] 8038d150 00000140 00000002 8fe68f40 00000000 802ae190 00000008 806b0008
Tue Dec 15 14:21:48 2020 kern.warn kernel: [ 128.243517] ...
Tue Dec 15 14:21:48 2020 kern.warn kernel: [ 128.245952] Call Trace:
Tue Dec 15 14:21:48 2020 kern.warn kernel: [ 128.245968] [<8049da98>] 0x8049da98
Tue Dec 15 14:21:48 2020 kern.warn kernel: [ 128.251865] [<8038d150>] 0x8038d150
Tue Dec 15 14:21:48 2020 kern.warn kernel: [ 128.255334] [<802ae190>] 0x802ae190
Tue Dec 15 14:21:48 2020 kern.warn kernel: [ 128.258804] [<8000c1a0>] 0x8000c1a0
Tue Dec 15 14:21:48 2020 kern.warn kernel: [ 128.262273] [<8000c1a8>] 0x8000c1a8
Tue Dec 15 14:21:48 2020 kern.warn kernel: [ 128.265741] [<804868d4>] 0x804868d4
Tue Dec 15 14:21:48 2020 kern.warn kernel: [ 128.269211] [<80071c80>] 0x80071c80
Tue Dec 15 14:21:48 2020 kern.warn kernel: [ 128.272681] [<8002e798>] 0x8002e798
Tue Dec 15 14:21:48 2020 kern.warn kernel: [ 128.276148] [<8038d150>] 0x8038d150
Tue Dec 15 14:21:48 2020 kern.warn kernel: [ 128.279619] [<8002e820>] 0x8002e820
Tue Dec 15 14:21:48 2020 kern.warn kernel: [ 128.283088] [<800552b8>] 0x800552b8
Tue Dec 15 14:21:48 2020 kern.warn kernel: [ 128.286556] [<8038d150>] 0x8038d150
Tue Dec 15 14:21:48 2020 kern.warn kernel: [ 128.290030] [<80099b90>] 0x80099b90
Tue Dec 15 14:21:48 2020 kern.warn kernel: [ 128.293500] [<8038cfa4>] 0x8038cfa4
Tue Dec 15 14:21:48 2020 kern.warn kernel: [ 128.296968] [<80088738>] 0x80088738
Tue Dec 15 14:21:48 2020 kern.warn kernel: [ 128.300443] [<800889f4>] 0x800889f4
Tue Dec 15 14:21:48 2020 kern.warn kernel: [ 128.303913] [<80079328>] 0x80079328
Tue Dec 15 14:21:48 2020 kern.warn kernel: [ 128.307423] [<804a4898>] 0x804a4898
Tue Dec 15 14:21:48 2020 kern.warn kernel: [ 128.310896] [<80033164>] 0x80033164
Tue Dec 15 14:21:48 2020 kern.warn kernel: [ 128.314367] [<8025b4c0>] 0x8025b4c0
Tue Dec 15 14:21:48 2020 kern.warn kernel: [ 128.317836] [<80007488>] 0x80007488
Tue Dec 15 14:21:48 2020 kern.warn kernel: [ 128.321304]
Tue Dec 15 14:21:48 2020 kern.warn kernel: [ 128.322876] ---[ end trace c4b8b02c9abc8f94 ]---

@openwrt-bot
Copy link
Author

gregd72002:

@ivan Verevkin, I compile it myself from the sources

@openwrt-bot
Copy link
Author

figeac888:

@gregory D Can you share the way to compile it ?

OpenWrt settings target ? options ? etc..

@openwrt-bot
Copy link
Author

Apocalypse:

@duce I'm also testing my own build from master sources and it seems to be 100% stable. I have not managed to hang it or received kernel panic in the tests that i have done and that gave rise to problems in 19.07 with the old swconfig driver.

I'm compiling latest master sources for all MT7621 targets with luci and some more packages like PPPoE that may be necessary to configure the internet connection. I'm also compiling the sources of all packages to make my own repository and be able to install the packages directly from it. When it's completed i'll post the server url with the builds on the OpenWRT forum.

https://forum.openwrt.org/t/ramips-mt7621-freewrt-20-12-master-branch-based/82672

@openwrt-bot
Copy link
Author

figeac888:

Hey all,

I build latest code but there are still some issues (related to : https://bugs.openwrt.org/index.php?do=details&task_id=3453) :
Going to monitor it longer.

Model Xiaomi Mi Router AC2100
Architecture MediaTek MT7621 ver:1 eco:3
Firmware Version OpenWrt SNAPSHOT r15253-d6cb50c7ba / LuCI Master git-20.357.24777-d72edc1
Kernel Version 5.4.83
Local Time 2020-12-22 13:56:30

[ 1571.607189] mt7530 mdio-bus:1f lan1: Link is Up - 1Gbps/Full - flow control rx/tx
[ 1571.614892] br-lan: port 1(lan1) entered blocking state
[ 1571.620145] br-lan: port 1(lan1) entered forwarding state
[ 1571.671196] mt7530 mdio-bus:1f lan2: Link is Up - 1Gbps/Full - flow control rx/tx
[ 1571.678769] br-lan: port 2(lan2) entered blocking state
[ 1571.684011] br-lan: port 2(lan2) entered forwarding state
[ 1880.612548] xt_CT: No such helper "ftp"
[ 2021.576600] xt_CT: No such helper "ftp"
[ 3016.455948] mt7530 mdio-bus:1f lan1: Link is Down
[ 3016.461103] br-lan: port 1(lan1) entered disabled state
[ 3017.480158] mt7530 mdio-bus:1f lan1: Link is Up - 10Mbps/Full - flow control off
[ 3017.487675] br-lan: port 1(lan1) entered blocking state
[ 3017.492905] br-lan: port 1(lan1) entered forwarding state
[ 6003.433188] mt7530 mdio-bus:1f lan1: Link is Down
[ 6003.438316] br-lan: port 1(lan1) entered disabled state
[ 6005.481413] mt7530 mdio-bus:1f lan1: Link is Up - 1Gbps/Full - flow control off
[ 6005.489201] br-lan: port 1(lan1) entered blocking state
[ 6005.494478] br-lan: port 1(lan1) entered forwarding state
[ 6020.841011] mt7530 mdio-bus:1f lan1: Link is Down
[ 6020.845892] br-lan: port 1(lan1) entered disabled state
[ 6023.913216] mt7530 mdio-bus:1f lan1: Link is Up - 1Gbps/Full - flow control rx/tx
[ 6023.920765] br-lan: port 1(lan1) entered blocking state
[ 6023.926020] br-lan: port 1(lan1) entered forwarding state
[ 6124.264042] mt7530 mdio-bus:1f lan1: Link is Down
[ 6124.268905] br-lan: port 1(lan1) entered disabled state
[ 6126.312294] mt7530 mdio-bus:1f lan1: Link is Up - 10Mbps/Full - flow control off
[ 6126.319790] br-lan: port 1(lan1) entered blocking state
[ 6126.325074] br-lan: port 1(lan1) entered forwarding state
[ 6132.455953] mt7530 mdio-bus:1f lan1: Link is Down
[ 6132.460804] br-lan: port 1(lan1) entered disabled state
[ 6135.528149] mt7530 mdio-bus:1f lan1: Link is Up - 1Gbps/Full - flow control off
[ 6135.535526] br-lan: port 1(lan1) entered blocking state
[ 6135.540791] br-lan: port 1(lan1) entered forwarding state
[ 6152.935698] mt7530 mdio-bus:1f lan1: Link is Down
[ 6152.940551] br-lan: port 1(lan1) entered disabled state
[ 6156.007943] mt7530 mdio-bus:1f lan1: Link is Up - 1Gbps/Full - flow control rx/tx
[ 6156.015623] br-lan: port 1(lan1) entered blocking state
[ 6156.020874] br-lan: port 1(lan1) entered forwarding state

@openwrt-bot
Copy link
Author

figeac888:

I'm such a noob, it's my computer.. power off.. power on..

@openwrt-bot
Copy link
Author

mradalbert:

Seems similar to my problem, also MTK device:
https://bugs.openwrt.org/index.php?do=details&task_id=3702

@aparcar aparcar added release/19.07 pull request/issue targeted (also) for OpenWrt 19.07 release kernel pull request/issue with Linux kernel related changes labels Feb 22, 2022
Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment
Labels
flyspray kernel pull request/issue with Linux kernel related changes release/19.07 pull request/issue targeted (also) for OpenWrt 19.07 release
Projects
None yet
Development

No branches or pull requests

2 participants