Skip to content
New issue

Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.

By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.

Already on GitHub? Sign in to your account

FS#3446 - No WAN on EA7500 V1 since snapshots of November 9th 2020 #8317

Open
openwrt-bot opened this issue Nov 12, 2020 · 2 comments
Open
Labels

Comments

@openwrt-bot
Copy link

tiagofreire-pt:

# logread
Thu Nov 12 20:20:17 2020 kern.info kernel: [ 0.000000] Booting Linux on physical CPU 0x0
Thu Nov 12 20:20:17 2020 kern.notice kernel: [ 0.000000] Linux version 5.4.75 (redalert@megadef) (gcc version 8.4.0 (OpenWrt GCC 8.4.0 r14926-41b867165d)) #0 SMP Thu Nov 12 17:21:55 2020
Thu Nov 12 20:20:17 2020 kern.info kernel: [ 0.000000] CPU: ARMv7 Processor [512f04d0] revision 0 (ARMv7), cr=10c5787d
Thu Nov 12 20:20:17 2020 kern.info kernel: [ 0.000000] CPU: div instructions available: patching division code
Thu Nov 12 20:20:17 2020 kern.info kernel: [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache
Thu Nov 12 20:20:17 2020 kern.info kernel: [ 0.000000] OF: fdt: Machine model: Linksys EA7500 V1 WiFi Router
Thu Nov 12 20:20:17 2020 kern.info kernel: [ 0.000000] Memory policy: Data cache writealloc
Thu Nov 12 20:20:17 2020 kern.debug kernel: [ 0.000000] On node 0 totalpages: 57344
Thu Nov 12 20:20:17 2020 kern.debug kernel: [ 0.000000] Normal zone: 504 pages used for memmap
Thu Nov 12 20:20:17 2020 kern.debug kernel: [ 0.000000] Normal zone: 0 pages reserved
Thu Nov 12 20:20:17 2020 kern.debug kernel: [ 0.000000] Normal zone: 57344 pages, LIFO batch:15
Thu Nov 12 20:20:17 2020 kern.info kernel: [ 0.000000] percpu: Embedded 15 pages/cpu s30156 r8192 d23092 u61440
Thu Nov 12 20:20:17 2020 kern.debug kernel: [ 0.000000] pcpu-alloc: s30156 r8192 d23092 u61440 alloc=154096
Thu Nov 12 20:20:17 2020 kern.debug kernel: [ 0.000000] pcpu-alloc: [0] 0 [0] 1
Thu Nov 12 20:20:17 2020 kern.info kernel: [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 56840
Thu Nov 12 20:20:17 2020 kern.notice kernel: [ 0.000000] Kernel command line: console=ttyMSM0,115200n8 ubi.mtd=16
Thu Nov 12 20:20:17 2020 kern.notice kernel: [ 0.000000] Bootloader command line (ignored): console=ttyHSL1,115200n8 init=/sbin/init rootfstype=squashfs ubi.mtd=16,2048 ubi.block=0,0 root=/dev/ubiblock0_0 rootwait ro
Thu Nov 12 20:20:17 2020 kern.info kernel: [ 0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes, linear)
Thu Nov 12 20:20:17 2020 kern.info kernel: [ 0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes, linear)
Thu Nov 12 20:20:17 2020 kern.info kernel: [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
Thu Nov 12 20:20:17 2020 kern.info kernel: [ 0.000000] Memory: 217252K/229376K available (5928K kernel code, 191K rwdata, 1508K rodata, 1024K init, 228K bss, 12124K reserved, 0K cma-reserved, 0K highmem)
Thu Nov 12 20:20:17 2020 kern.info kernel: [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
Thu Nov 12 20:20:17 2020 kern.info kernel: [ 0.000000] rcu: Hierarchical RCU implementation.
Thu Nov 12 20:20:17 2020 kern.info kernel: [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies.
Thu Nov 12 20:20:17 2020 kern.info kernel: [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
Thu Nov 12 20:20:17 2020 kern.notice kernel: [ 0.000000] random: get_random_bytes called from start_kernel+0x340/0x4e8 with crng_init=0
Thu Nov 12 20:20:17 2020 kern.info kernel: [ 0.000000] clocksource: dg_timer: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 305801671480 ns
Thu Nov 12 20:20:17 2020 kern.info kernel: [ 0.000007] sched_clock: 32 bits at 6MHz, resolution 160ns, wraps every 343597383600ns
Thu Nov 12 20:20:17 2020 kern.info kernel: [ 0.000020] Switching to timer-based delay loop, resolution 160ns
Thu Nov 12 20:20:17 2020 kern.info kernel: [ 0.000244] Calibrating delay loop (skipped), value calculated using timer frequency.. 12.50 BogoMIPS (lpj=62500)
Thu Nov 12 20:20:17 2020 kern.info kernel: [ 0.000263] pid_max: default: 32768 minimum: 301
Thu Nov 12 20:20:17 2020 kern.info kernel: [ 0.000459] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linear)
Thu Nov 12 20:20:17 2020 kern.info kernel: [ 0.000477] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear)
Thu Nov 12 20:20:17 2020 kern.info kernel: [ 0.001497] CPU: Testing write buffer coherency: ok
Thu Nov 12 20:20:17 2020 kern.info kernel: [ 0.002672] Setting up static identity map for 0x42300000 - 0x42300060
Thu Nov 12 20:20:17 2020 kern.info kernel: [ 0.002849] rcu: Hierarchical SRCU implementation.
Thu Nov 12 20:20:17 2020 kern.info kernel: [ 0.003359] smp: Bringing up secondary CPUs ...
Thu Nov 12 20:20:17 2020 kern.info kernel: [ 0.005273] smp: Brought up 1 node, 2 CPUs
Thu Nov 12 20:20:17 2020 kern.info kernel: [ 0.005289] SMP: Total of 2 processors activated (25.00 BogoMIPS).
Thu Nov 12 20:20:17 2020 kern.info kernel: [ 0.005299] CPU: All CPU(s) started in SVC mode.
Thu Nov 12 20:20:17 2020 kern.info kernel: [ 0.015520] VFP support v0.3: implementor 51 architecture 64 part 4d variant 2 rev 0
Thu Nov 12 20:20:17 2020 kern.info kernel: [ 0.015679] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
Thu Nov 12 20:20:17 2020 kern.info kernel: [ 0.015706] futex hash table entries: 512 (order: 3, 32768 bytes, linear)
Thu Nov 12 20:20:17 2020 kern.info kernel: [ 0.015872] pinctrl core: initialized pinctrl subsystem
Thu Nov 12 20:20:17 2020 kern.info kernel: [ 0.017039] NET: Registered protocol family 16
Thu Nov 12 20:20:17 2020 kern.info kernel: [ 0.017352] DMA: preallocated 256 KiB pool for atomic coherent allocations
Thu Nov 12 20:20:17 2020 kern.info kernel: [ 0.018694] cpuidle: using governor ladder
Thu Nov 12 20:20:17 2020 kern.info kernel: [ 0.018761] cpuidle: using governor menu
Thu Nov 12 20:20:17 2020 kern.info kernel: [ 0.050126] usbcore: registered new interface driver usbfs
Thu Nov 12 20:20:17 2020 kern.info kernel: [ 0.050215] usbcore: registered new interface driver hub
Thu Nov 12 20:20:17 2020 kern.info kernel: [ 0.050298] usbcore: registered new device driver usb
Thu Nov 12 20:20:17 2020 kern.info kernel: [ 0.050370] pps_core: LinuxPPS API ver. 1 registered
Thu Nov 12 20:20:17 2020 kern.info kernel: [ 0.050382] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti giometti@linux.it
Thu Nov 12 20:20:17 2020 kern.info kernel: [ 0.050421] PTP clock support registered
Thu Nov 12 20:20:17 2020 kern.warn kernel: [ 0.051184] workqueue: max_active 576 requested for napi_workq is out of range, clamping between 1 and 512
Thu Nov 12 20:20:17 2020 kern.info kernel: [ 0.052451] clocksource: Switched to clocksource dg_timer
Thu Nov 12 20:20:17 2020 kern.info kernel: [ 0.053351] thermal_sys: Registered thermal governor 'step_wise'
Thu Nov 12 20:20:17 2020 kern.info kernel: [ 0.055755] NET: Registered protocol family 2
Thu Nov 12 20:20:17 2020 kern.info kernel: [ 0.056325] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes, linear)
Thu Nov 12 20:20:17 2020 kern.info kernel: [ 0.056367] TCP established hash table entries: 2048 (order: 1, 8192 bytes, linear)
Thu Nov 12 20:20:17 2020 kern.info kernel: [ 0.056402] TCP bind hash table entries: 2048 (order: 2, 16384 bytes, linear)
Thu Nov 12 20:20:17 2020 kern.info kernel: [ 0.056435] TCP: Hash tables configured (established 2048 bind 2048)
Thu Nov 12 20:20:17 2020 kern.info kernel: [ 0.056538] UDP hash table entries: 256 (order: 1, 8192 bytes, linear)
Thu Nov 12 20:20:17 2020 kern.info kernel: [ 0.056570] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear)
Thu Nov 12 20:20:17 2020 kern.info kernel: [ 0.056794] NET: Registered protocol family 1
Thu Nov 12 20:20:17 2020 kern.info kernel: [ 0.056848] PCI: CLS 0 bytes, default 64
Thu Nov 12 20:20:17 2020 kern.info kernel: [ 0.058196] workingset: timestamp_bits=14 max_order=16 bucket_order=2
Thu Nov 12 20:20:17 2020 kern.info kernel: [ 0.065135] squashfs: version 4.0 (2009/01/31) Phillip Lougher
Thu Nov 12 20:20:17 2020 kern.info kernel: [ 0.065151] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
Thu Nov 12 20:20:17 2020 kern.warn kernel: [ 0.104920] qcom-pcie 1b500000.pci: 1b500000.pci supply vdda not found, using dummy regulator
Thu Nov 12 20:20:17 2020 kern.warn kernel: [ 0.105068] qcom-pcie 1b500000.pci: 1b500000.pci supply vdda_phy not found, using dummy regulator
Thu Nov 12 20:20:17 2020 kern.warn kernel: [ 0.105180] qcom-pcie 1b500000.pci: 1b500000.pci supply vdda_refclk not found, using dummy regulator
Thu Nov 12 20:20:17 2020 kern.info kernel: [ 0.105450] qcom-pcie 1b500000.pci: host bridge /soc/pci@1b500000 ranges:
Thu Nov 12 20:20:17 2020 kern.debug kernel: [ 0.105477] qcom-pcie 1b500000.pci: Parsing ranges property...
Thu Nov 12 20:20:17 2020 kern.info kernel: [ 0.105523] qcom-pcie 1b500000.pci: IO 0x0fe00000..0x0fefffff -> 0x0fe00000
Thu Nov 12 20:20:17 2020 kern.info kernel: [ 0.105561] qcom-pcie 1b500000.pci: MEM 0x08000000..0x0fdfffff -> 0x08000000
Thu Nov 12 20:20:17 2020 kern.info kernel: [ 0.327873] qcom-pcie 1b500000.pci: Link up
Thu Nov 12 20:20:17 2020 kern.info kernel: [ 0.328043] qcom-pcie 1b500000.pci: PCI host bridge to bus 0000:00
Thu Nov 12 20:20:17 2020 kern.info kernel: [ 0.328069] pci_bus 0000:00: root bus resource [bus 00-ff]
Thu Nov 12 20:20:17 2020 kern.info kernel: [ 0.328090] pci_bus 0000:00: root bus resource [io 0x0000-0xfffff] (bus address [0xfe00000-0xfefffff])
Thu Nov 12 20:20:17 2020 kern.info kernel: [ 0.328106] pci_bus 0000:00: root bus resource [mem 0x08000000-0x0fdfffff]
Thu Nov 12 20:20:17 2020 kern.debug kernel: [ 0.328124] pci_bus 0000:00: scanning bus
Thu Nov 12 20:20:17 2020 kern.info kernel: [ 0.328171] pci 0000:00:00.0: [17cb:0101] type 01 class 0xff0000
Thu Nov 12 20:20:17 2020 kern.info kernel: [ 0.328337] pci 0000:00:00.0: supports D1
Thu Nov 12 20:20:17 2020 kern.info kernel: [ 0.328355] pci 0000:00:00.0: PME# supported from D0 D1 D3hot
Thu Nov 12 20:20:17 2020 kern.debug kernel: [ 0.328378] pci 0000:00:00.0: PME# disabled
Thu Nov 12 20:20:17 2020 kern.debug kernel: [ 0.332215] pci_bus 0000:00: fixups for bus
Thu Nov 12 20:20:17 2020 kern.info kernel: [ 0.332239] PCI: bus0: Fast back to back transfers disabled
Thu Nov 12 20:20:17 2020 kern.debug kernel: [ 0.332259] pci 0000:00:00.0: scanning [bus 01-ff] behind bridge, pass 0
Thu Nov 12 20:20:17 2020 kern.debug kernel: [ 0.332391] pci_bus 0000:01: scanning bus
Thu Nov 12 20:20:17 2020 kern.info kernel: [ 0.332581] pci 0000:01:00.0: [168c:0040] type 00 class 0x028000
Thu Nov 12 20:20:17 2020 kern.info kernel: [ 0.333077] pci 0000:01:00.0: reg 0x10: [mem 0x00000000-0x001fffff 64bit]
Thu Nov 12 20:20:17 2020 kern.info kernel: [ 0.334319] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold
Thu Nov 12 20:20:17 2020 kern.debug kernel: [ 0.334367] pci 0000:01:00.0: PME# disabled
Thu Nov 12 20:20:17 2020 kern.info kernel: [ 0.334629] pci 0000:01:00.0: 2.000 Gb/s available PCIe bandwidth, limited by 2.5 GT/s x1 link at 0000:00:00.0 (capable of 4.000 Gb/s with 5 GT/s x1 link)
Thu Nov 12 20:20:17 2020 kern.debug kernel: [ 0.338410] pci_bus 0000:01: fixups for bus
Thu Nov 12 20:20:17 2020 kern.info kernel: [ 0.338486] PCI: bus1: Fast back to back transfers disabled
Thu Nov 12 20:20:17 2020 kern.debug kernel: [ 0.338503] pci_bus 0000:01: bus scan returning with max=01
Thu Nov 12 20:20:17 2020 kern.debug kernel: [ 0.338522] pci 0000:00:00.0: scanning [bus 01-ff] behind bridge, pass 1
Thu Nov 12 20:20:17 2020 kern.debug kernel: [ 0.338542] pci_bus 0000:00: bus scan returning with max=ff
Thu Nov 12 20:20:17 2020 kern.info kernel: [ 0.338576] pci 0000:00:00.0: BAR 8: assigned [mem 0x08000000-0x081fffff]
Thu Nov 12 20:20:17 2020 kern.info kernel: [ 0.338602] pci 0000:01:00.0: BAR 0: assigned [mem 0x08000000-0x081fffff 64bit]
Thu Nov 12 20:20:17 2020 kern.info kernel: [ 0.338739] pci 0000:00:00.0: PCI bridge to [bus 01-ff]
Thu Nov 12 20:20:17 2020 kern.info kernel: [ 0.338764] pci 0000:00:00.0: bridge window [mem 0x08000000-0x081fffff]
Thu Nov 12 20:20:17 2020 kern.debug kernel: [ 0.338957] pcieport 0000:00:00.0: assign IRQ: got 35
Thu Nov 12 20:20:17 2020 kern.info kernel: [ 0.339722] pcieport 0000:00:00.0: AER: enabled with IRQ 36
Thu Nov 12 20:20:17 2020 kern.warn kernel: [ 0.340298] qcom-pcie 1b700000.pci: 1b700000.pci supply vdda not found, using dummy regulator
Thu Nov 12 20:20:17 2020 kern.warn kernel: [ 0.340429] qcom-pcie 1b700000.pci: 1b700000.pci supply vdda_phy not found, using dummy regulator
Thu Nov 12 20:20:17 2020 kern.warn kernel: [ 0.340549] qcom-pcie 1b700000.pci: 1b700000.pci supply vdda_refclk not found, using dummy regulator
Thu Nov 12 20:20:17 2020 kern.info kernel: [ 0.340803] qcom-pcie 1b700000.pci: host bridge /soc/pci@1b700000 ranges:
Thu Nov 12 20:20:17 2020 kern.debug kernel: [ 0.340825] qcom-pcie 1b700000.pci: Parsing ranges property...
Thu Nov 12 20:20:17 2020 kern.info kernel: [ 0.340869] qcom-pcie 1b700000.pci: IO 0x31e00000..0x31efffff -> 0x31e00000
Thu Nov 12 20:20:17 2020 kern.info kernel: [ 0.340904] qcom-pcie 1b700000.pci: MEM 0x2e000000..0x31dfffff -> 0x2e000000
Thu Nov 12 20:20:17 2020 kern.info kernel: [ 0.569952] qcom-pcie 1b700000.pci: Link up
Thu Nov 12 20:20:17 2020 kern.info kernel: [ 0.570104] qcom-pcie 1b700000.pci: PCI host bridge to bus 0001:00
Thu Nov 12 20:20:17 2020 kern.info kernel: [ 0.570123] pci_bus 0001:00: root bus resource [bus 00-ff]
Thu Nov 12 20:20:17 2020 kern.info kernel: [ 0.570140] pci_bus 0001:00: root bus resource [mem 0x2e000000-0x31dfffff]
Thu Nov 12 20:20:17 2020 kern.debug kernel: [ 0.570157] pci_bus 0001:00: scanning bus
Thu Nov 12 20:20:17 2020 kern.info kernel: [ 0.570199] pci 0001:00:00.0: [17cb:0101] type 01 class 0xff0000
Thu Nov 12 20:20:17 2020 kern.info kernel: [ 0.570344] pci 0001:00:00.0: supports D1
Thu Nov 12 20:20:17 2020 kern.info kernel: [ 0.570360] pci 0001:00:00.0: PME# supported from D0 D1 D3hot
Thu Nov 12 20:20:17 2020 kern.debug kernel: [ 0.570377] pci 0001:00:00.0: PME# disabled
Thu Nov 12 20:20:17 2020 kern.debug kernel: [ 0.574283] pci_bus 0001:00: fixups for bus
Thu Nov 12 20:20:17 2020 kern.info kernel: [ 0.574306] PCI: bus0: Fast back to back transfers disabled
Thu Nov 12 20:20:17 2020 kern.debug kernel: [ 0.574324] pci 0001:00:00.0: scanning [bus 01-ff] behind bridge, pass 0
Thu Nov 12 20:20:17 2020 kern.debug kernel: [ 0.574444] pci_bus 0001:01: scanning bus
Thu Nov 12 20:20:17 2020 kern.info kernel: [ 0.574618] pci 0001:01:00.0: [168c:0040] type 00 class 0x028000
Thu Nov 12 20:20:17 2020 kern.info kernel: [ 0.574971] pci 0001:01:00.0: reg 0x10: [mem 0x00000000-0x001fffff 64bit]
Thu Nov 12 20:20:17 2020 kern.info kernel: [ 0.576115] pci 0001:01:00.0: PME# supported from D0 D3hot D3cold
Thu Nov 12 20:20:17 2020 kern.debug kernel: [ 0.576160] pci 0001:01:00.0: PME# disabled
Thu Nov 12 20:20:17 2020 kern.debug kernel: [ 0.580137] pci_bus 0001:01: fixups for bus
Thu Nov 12 20:20:17 2020 kern.info kernel: [ 0.580209] PCI: bus1: Fast back to back transfers disabled
Thu Nov 12 20:20:17 2020 kern.debug kernel: [ 0.580224] pci_bus 0001:01: bus scan returning with max=01
Thu Nov 12 20:20:17 2020 kern.debug kernel: [ 0.580242] pci 0001:00:00.0: scanning [bus 01-ff] behind bridge, pass 1
Thu Nov 12 20:20:17 2020 kern.debug kernel: [ 0.580260] pci_bus 0001:00: bus scan returning with max=ff
Thu Nov 12 20:20:17 2020 kern.info kernel: [ 0.580288] pci 0001:00:00.0: BAR 8: assigned [mem 0x2e000000-0x2e1fffff]
Thu Nov 12 20:20:17 2020 kern.info kernel: [ 0.580312] pci 0001:01:00.0: BAR 0: assigned [mem 0x2e000000-0x2e1fffff 64bit]
Thu Nov 12 20:20:17 2020 kern.info kernel: [ 0.580437] pci 0001:00:00.0: PCI bridge to [bus 01-ff]
Thu Nov 12 20:20:17 2020 kern.info kernel: [ 0.580459] pci 0001:00:00.0: bridge window [mem 0x2e000000-0x2e1fffff]
Thu Nov 12 20:20:17 2020 kern.debug kernel: [ 0.580644] pcieport 0001:00:00.0: assign IRQ: got 37
Thu Nov 12 20:20:17 2020 kern.info kernel: [ 0.581356] pcieport 0001:00:00.0: AER: enabled with IRQ 38
Thu Nov 12 20:20:17 2020 kern.warn kernel: [ 0.581945] qcom-pcie 1b900000.pci: 1b900000.pci supply vdda not found, using dummy regulator
Thu Nov 12 20:20:17 2020 kern.warn kernel: [ 0.582067] qcom-pcie 1b900000.pci: 1b900000.pci supply vdda_phy not found, using dummy regulator
Thu Nov 12 20:20:17 2020 kern.warn kernel: [ 0.582174] qcom-pcie 1b900000.pci: 1b900000.pci supply vdda_refclk not found, using dummy regulator
Thu Nov 12 20:20:17 2020 kern.info kernel: [ 0.582456] qcom-pcie 1b900000.pci: host bridge /soc/pci@1b900000 ranges:
Thu Nov 12 20:20:17 2020 kern.debug kernel: [ 0.582480] qcom-pcie 1b900000.pci: Parsing ranges property...
Thu Nov 12 20:20:17 2020 kern.info kernel: [ 0.582520] qcom-pcie 1b900000.pci: IO 0x35e00000..0x35efffff -> 0x35e00000
Thu Nov 12 20:20:17 2020 kern.info kernel: [ 0.582555] qcom-pcie 1b900000.pci: MEM 0x32000000..0x35dfffff -> 0x32000000
Thu Nov 12 20:20:17 2020 kern.info kernel: [ 1.733889] qcom-pcie 1b900000.pci: Phy link never came up
Thu Nov 12 20:20:17 2020 kern.err kernel: [ 1.735949] qcom-pcie 1b900000.pci: cannot initialize host
Thu Nov 12 20:20:17 2020 kern.warn kernel: [ 1.736350] qcom-pcie: probe of 1b900000.pci failed with error -110
Thu Nov 12 20:20:17 2020 kern.info kernel: [ 1.738663] L2 @ QSB rate. Forcing new rate.
Thu Nov 12 20:20:17 2020 kern.info kernel: [ 1.738884] L2 @ 384000 KHz
Thu Nov 12 20:20:17 2020 kern.info kernel: [ 1.739066] CPU0 @ 800000 KHz
Thu Nov 12 20:20:17 2020 kern.info kernel: [ 1.739078] CPU1 @ QSB rate. Forcing new rate.
Thu Nov 12 20:20:17 2020 kern.info kernel: [ 1.739207] CPU1 @ 384000 KHz
Thu Nov 12 20:20:17 2020 kern.info kernel: [ 1.742989] gsbi 16300000.gsbi: GSBI port protocol: 6 crci: 0
Thu Nov 12 20:20:17 2020 kern.info kernel: [ 1.745190] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled
Thu Nov 12 20:20:17 2020 kern.info kernel: [ 1.745982] msm_serial 16340000.serial: msm_serial: detected port #0
Thu Nov 12 20:20:17 2020 kern.info kernel: [ 1.746034] msm_serial 16340000.serial: uartclk = 7372800
Thu Nov 12 20:20:17 2020 kern.info kernel: [ 1.746108] 16340000.serial: ttyMSM0 at MMIO 0x16340000 (irq = 39, base_baud = 460800) is a MSM
Thu Nov 12 20:20:17 2020 kern.info kernel: [ 1.746147] msm_serial: console setup on port #0
Thu Nov 12 20:20:17 2020 kern.info kernel: [ 2.598600] printk: console [ttyMSM0] enabled
Thu Nov 12 20:20:17 2020 kern.info kernel: [ 2.603666] msm_serial: driver initialized
Thu Nov 12 20:20:17 2020 kern.info kernel: [ 2.612949] loop: module loaded
Thu Nov 12 20:20:17 2020 kern.info kernel: [ 2.614525] nand: device found, Manufacturer ID: 0x01, Chip ID: 0xa1
Thu Nov 12 20:20:17 2020 kern.info kernel: [ 2.614905] nand: AMD/Spansion S34MS01G2
Thu Nov 12 20:20:17 2020 kern.info kernel: [ 2.621496] nand: 128 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64
Thu Nov 12 20:20:17 2020 kern.notice kernel: [ 2.625701] 19 fixed-partitions partitions found on MTD device qcom_nand.0
Thu Nov 12 20:20:17 2020 kern.notice kernel: [ 2.632885] Creating 19 MTD partitions on "qcom_nand.0":
Thu Nov 12 20:20:17 2020 kern.notice kernel: [ 2.639648] 0x000000000000-0x000000040000 : "SBL1"
Thu Nov 12 20:20:17 2020 kern.notice kernel: [ 2.646611] 0x000000040000-0x000000180000 : "MIBIB"
Thu Nov 12 20:20:17 2020 kern.notice kernel: [ 2.652707] 0x000000180000-0x0000002c0000 : "SBL2"
Thu Nov 12 20:20:17 2020 kern.notice kernel: [ 2.657466] 0x0000002c0000-0x000000540000 : "SBL3"
Thu Nov 12 20:20:17 2020 kern.notice kernel: [ 2.660067] random: fast init done
Thu Nov 12 20:20:17 2020 kern.notice kernel: [ 2.668425] 0x000000540000-0x000000660000 : "DDRCONFIG"
Thu Nov 12 20:20:17 2020 kern.notice kernel: [ 2.671232] 0x000000660000-0x000000780000 : "SSD"
Thu Nov 12 20:20:17 2020 kern.notice kernel: [ 2.675496] 0x000000780000-0x000000a00000 : "TZ"
Thu Nov 12 20:20:17 2020 kern.notice kernel: [ 2.682461] 0x000000a00000-0x000000c80000 : "RPM"
Thu Nov 12 20:20:17 2020 kern.notice kernel: [ 2.687549] 0x000000c80000-0x000000dc0000 : "art"
Thu Nov 12 20:20:17 2020 kern.notice kernel: [ 2.690515] 0x000000dc0000-0x000000ec0000 : "APPSBL"
Thu Nov 12 20:20:17 2020 kern.notice kernel: [ 2.694071] 0x000000ec0000-0x000000f00000 : "u_env"
Thu Nov 12 20:20:17 2020 kern.notice kernel: [ 2.697830] 0x000000f00000-0x000000f40000 : "s_env"
Thu Nov 12 20:20:17 2020 kern.notice kernel: [ 2.702437] 0x000000f40000-0x000000f80000 : "devinfo"
Thu Nov 12 20:20:17 2020 kern.notice kernel: [ 2.707346] 0x000000f80000-0x000003780000 : "kernel1"
Thu Nov 12 20:20:17 2020 kern.notice kernel: [ 2.778212] 0x000001280000-0x000003780000 : "rootfs1"
Thu Nov 12 20:20:17 2020 kern.notice kernel: [ 2.839660] 0x000003780000-0x000005f80000 : "kernel2"
Thu Nov 12 20:20:17 2020 kern.notice kernel: [ 2.905980] 0x000003a80000-0x000005f80000 : "rootfs2"
Thu Nov 12 20:20:17 2020 kern.notice kernel: [ 2.967364] 0x000005f80000-0x000006080000 : "sysdiag"
Thu Nov 12 20:20:17 2020 kern.notice kernel: [ 2.969950] 0x000006080000-0x000008000000 : "syscfg"
Thu Nov 12 20:20:17 2020 kern.notice kernel: [ 2.995820] random: crng init done
Thu Nov 12 20:20:17 2020 kern.info kernel: [ 3.025346] libphy: ipq8064_mdio_bus: probed
Thu Nov 12 20:20:17 2020 kern.info kernel: [ 3.046052] switch0: Atheros AR8337 rev. 2 switch registered on 37000000.mdio-mii
Thu Nov 12 20:20:17 2020 kern.info kernel: [ 3.874960] libphy: Fixed MDIO Bus: probed
Thu Nov 12 20:20:17 2020 kern.info kernel: [ 3.875635] ipq806x-gmac-dwmac 37200000.ethernet: IRQ eth_wake_irq not found
Thu Nov 12 20:20:17 2020 kern.info kernel: [ 3.877958] ipq806x-gmac-dwmac 37200000.ethernet: IRQ eth_lpi not found
Thu Nov 12 20:20:17 2020 kern.warn kernel: [ 3.885510] ipq806x-gmac-dwmac 37200000.ethernet: PTP uses main clock
Thu Nov 12 20:20:17 2020 kern.info kernel: [ 3.892332] ipq806x-gmac-dwmac 37200000.ethernet: User ID: 0x10, Synopsys ID: 0x37
Thu Nov 12 20:20:17 2020 kern.info kernel: [ 3.898184] ipq806x-gmac-dwmac 37200000.ethernet: DWMAC1000
Thu Nov 12 20:20:17 2020 kern.info kernel: [ 3.905635] ipq806x-gmac-dwmac 37200000.ethernet: DMA HW capability register supported
Thu Nov 12 20:20:17 2020 kern.info kernel: [ 3.911378] ipq806x-gmac-dwmac 37200000.ethernet: RX Checksum Offload Engine supported
Thu Nov 12 20:20:17 2020 kern.info kernel: [ 3.919194] ipq806x-gmac-dwmac 37200000.ethernet: COE Type 2
Thu Nov 12 20:20:17 2020 kern.info kernel: [ 3.927063] ipq806x-gmac-dwmac 37200000.ethernet: TX Checksum insertion supported
Thu Nov 12 20:20:17 2020 kern.info kernel: [ 3.932906] ipq806x-gmac-dwmac 37200000.ethernet: Wake-Up On Lan supported
Thu Nov 12 20:20:17 2020 kern.info kernel: [ 3.940198] ipq806x-gmac-dwmac 37200000.ethernet: Enhanced/Alternate descriptors
Thu Nov 12 20:20:17 2020 kern.info kernel: [ 3.947056] ipq806x-gmac-dwmac 37200000.ethernet: Enabled extended descriptors
Thu Nov 12 20:20:17 2020 kern.info kernel: [ 3.954586] ipq806x-gmac-dwmac 37200000.ethernet: Ring mode enabled
Thu Nov 12 20:20:17 2020 kern.info kernel: [ 3.961549] ipq806x-gmac-dwmac 37200000.ethernet: Enable RX Mitigation via HW Watchdog Timer
Thu Nov 12 20:20:17 2020 kern.info kernel: [ 3.967809] ipq806x-gmac-dwmac 37200000.ethernet: device MAC address 16:6b:c5:27:96:cf
Thu Nov 12 20:20:17 2020 kern.info kernel: [ 3.977394] ipq806x-gmac-dwmac 37400000.ethernet: IRQ eth_wake_irq not found
Thu Nov 12 20:20:17 2020 kern.info kernel: [ 3.984217] ipq806x-gmac-dwmac 37400000.ethernet: IRQ eth_lpi not found
Thu Nov 12 20:20:17 2020 kern.warn kernel: [ 3.991539] ipq806x-gmac-dwmac 37400000.ethernet: PTP uses main clock
Thu Nov 12 20:20:17 2020 kern.info kernel: [ 3.998261] ipq806x-gmac-dwmac 37400000.ethernet: User ID: 0x10, Synopsys ID: 0x37
Thu Nov 12 20:20:17 2020 kern.info kernel: [ 4.004362] ipq806x-gmac-dwmac 37400000.ethernet: DWMAC1000
Thu Nov 12 20:20:17 2020 kern.info kernel: [ 4.011723] ipq806x-gmac-dwmac 37400000.ethernet: DMA HW capability register supported
Thu Nov 12 20:20:17 2020 kern.info kernel: [ 4.017627] ipq806x-gmac-dwmac 37400000.ethernet: RX Checksum Offload Engine supported
Thu Nov 12 20:20:17 2020 kern.info kernel: [ 4.025344] ipq806x-gmac-dwmac 37400000.ethernet: COE Type 2
Thu Nov 12 20:20:17 2020 kern.info kernel: [ 4.033247] ipq806x-gmac-dwmac 37400000.ethernet: TX Checksum insertion supported
Thu Nov 12 20:20:17 2020 kern.info kernel: [ 4.038979] ipq806x-gmac-dwmac 37400000.ethernet: Wake-Up On Lan supported
Thu Nov 12 20:20:17 2020 kern.info kernel: [ 4.046430] ipq806x-gmac-dwmac 37400000.ethernet: Enhanced/Alternate descriptors
Thu Nov 12 20:20:17 2020 kern.info kernel: [ 4.053210] ipq806x-gmac-dwmac 37400000.ethernet: Enabled extended descriptors
Thu Nov 12 20:20:17 2020 kern.info kernel: [ 4.060683] ipq806x-gmac-dwmac 37400000.ethernet: Ring mode enabled
Thu Nov 12 20:20:17 2020 kern.info kernel: [ 4.067800] ipq806x-gmac-dwmac 37400000.ethernet: Enable RX Mitigation via HW Watchdog Timer
Thu Nov 12 20:20:18 2020 kern.info kernel: [ 4.073978] ipq806x-gmac-dwmac 37400000.ethernet: device MAC address 9e:eb:13:3b:0b:e2
Thu Nov 12 20:20:18 2020 kern.info kernel: [ 4.083647] i2c /dev entries driver
Thu Nov 12 20:20:18 2020 kern.notice kernel: [ 4.092666] cpuidle: enable-method property 'qcom,kpss-acc-v1' found operations
Thu Nov 12 20:20:18 2020 kern.notice kernel: [ 4.093946] cpuidle: enable-method property 'qcom,kpss-acc-v1' found operations
Thu Nov 12 20:20:18 2020 kern.info kernel: [ 4.101615] sdhci: Secure Digital Host Controller Interface driver
Thu Nov 12 20:20:18 2020 kern.info kernel: [ 4.108348] sdhci: Copyright(c) Pierre Ossman
Thu Nov 12 20:20:18 2020 kern.info kernel: [ 4.114561] sdhci-pltfm: SDHCI platform and OF driver helper
Thu Nov 12 20:20:18 2020 kern.info kernel: [ 4.121247] NET: Registered protocol family 10
Thu Nov 12 20:20:18 2020 kern.info kernel: [ 4.127167] Segment Routing with IPv6
Thu Nov 12 20:20:18 2020 kern.info kernel: [ 4.128988] NET: Registered protocol family 17
Thu Nov 12 20:20:18 2020 kern.info kernel: [ 4.133980] 8021q: 802.1Q VLAN Support v1.8
Thu Nov 12 20:20:18 2020 kern.notice kernel: [ 4.137039] Registering SWP/SWPB emulation handler
Thu Nov 12 20:20:18 2020 kern.info kernel: [ 4.162913] qcom_rpm 108000.rpm: RPM firmware 3.0.16777342
Thu Nov 12 20:20:18 2020 kern.info kernel: [ 4.179360] s1a: Bringing 0uV into 1050000-1050000uV
Thu Nov 12 20:20:18 2020 kern.info kernel: [ 4.179618] s1a: supplied by regulator-dummy
Thu Nov 12 20:20:18 2020 kern.info kernel: [ 4.183623] s1b: Bringing 0uV into 1050000-1050000uV
Thu Nov 12 20:20:18 2020 kern.info kernel: [ 4.187842] s1b: supplied by regulator-dummy
Thu Nov 12 20:20:18 2020 kern.info kernel: [ 4.192706] s2a: Bringing 0uV into 800000-800000uV
Thu Nov 12 20:20:18 2020 kern.info kernel: [ 4.197112] s2a: supplied by regulator-dummy
Thu Nov 12 20:20:18 2020 kern.info kernel: [ 4.201594] s2b: Bringing 0uV into 800000-800000uV
Thu Nov 12 20:20:18 2020 kern.info kernel: [ 4.206134] s2b: supplied by regulator-dummy
Thu Nov 12 20:20:18 2020 kern.notice kernel: [ 4.219101] ubi0: attaching mtd16
Thu Nov 12 20:20:18 2020 kern.notice kernel: [ 4.490681] ubi0: scanning is finished
Thu Nov 12 20:20:18 2020 kern.notice kernel: [ 4.500858] ubi0: attached mtd16 (name "rootfs2", size 37 MiB)
Thu Nov 12 20:20:18 2020 kern.notice kernel: [ 4.500879] ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
Thu Nov 12 20:20:18 2020 kern.notice kernel: [ 4.505655] ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
Thu Nov 12 20:20:18 2020 kern.notice kernel: [ 4.512431] ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096
Thu Nov 12 20:20:18 2020 kern.notice kernel: [ 4.519365] ubi0: good PEBs: 296, bad PEBs: 0, corrupted PEBs: 0
Thu Nov 12 20:20:18 2020 kern.notice kernel: [ 4.526120] ubi0: user volume: 2, internal volumes: 1, max. volumes count: 128
Thu Nov 12 20:20:18 2020 kern.notice kernel: [ 4.532311] ubi0: max/mean erase counter: 3/1, WL threshold: 4096, image sequence number: 1587269547
Thu Nov 12 20:20:18 2020 kern.notice kernel: [ 4.539420] ubi0: available PEBs: 0, total reserved PEBs: 296, PEBs reserved for bad PEB handling: 20
Thu Nov 12 20:20:18 2020 kern.info kernel: [ 4.549474] block ubiblock0_0: created from ubi0:0(rootfs)
Thu Nov 12 20:20:18 2020 kern.notice kernel: [ 4.549699] ubi0: background thread "ubi_bgt0d" started, PID 68
Thu Nov 12 20:20:18 2020 kern.notice kernel: [ 4.557818] ubiblock: device ubiblock0_0 (rootfs) set to be root filesystem
Thu Nov 12 20:20:18 2020 kern.info kernel: [ 4.557825] hctosys: unable to open rtc device (rtc0)
Thu Nov 12 20:20:18 2020 kern.info kernel: [ 4.595247] VFS: Mounted root (squashfs filesystem) readonly on device 254:0.
Thu Nov 12 20:20:18 2020 kern.info kernel: [ 4.598547] Freeing unused kernel memory: 1024K
Thu Nov 12 20:20:18 2020 kern.info kernel: [ 4.624007] Run /sbin/init as init process
Thu Nov 12 20:20:18 2020 user.info kernel: [ 5.035502] init: Console is alive
Thu Nov 12 20:20:18 2020 user.info kernel: [ 5.035628] init: - watchdog -
Thu Nov 12 20:20:18 2020 user.info kernel: [ 5.736018] kmodloader: loading kernel modules from /etc/modules-boot.d/

Thu Nov 12 20:20:18 2020 kern.info kernel: [ 5.781420] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
Thu Nov 12 20:20:18 2020 kern.notice kernel: [ 5.790883] SCSI subsystem initialized
Thu Nov 12 20:20:18 2020 kern.debug kernel: [ 5.801179] libata version 3.00 loaded.
Thu Nov 12 20:20:18 2020 kern.info kernel: [ 5.804896] ehci-fsl: Freescale EHCI Host controller driver
Thu Nov 12 20:20:18 2020 kern.info kernel: [ 5.805433] ehci-platform: EHCI generic platform driver
Thu Nov 12 20:20:18 2020 kern.info kernel: [ 5.812489] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
Thu Nov 12 20:20:18 2020 kern.info kernel: [ 5.815365] ohci-platform: OHCI generic platform driver
Thu Nov 12 20:20:18 2020 kern.err kernel: [ 5.822823] dwc3-qcom 110f8800.usb3: IRQ hs_phy_irq not found
Thu Nov 12 20:20:18 2020 kern.err kernel: [ 5.825847] dwc3-qcom 110f8800.usb3: IRQ dp_hs_phy_irq not found
Thu Nov 12 20:20:18 2020 kern.err kernel: [ 5.831752] dwc3-qcom 110f8800.usb3: IRQ dm_hs_phy_irq not found
Thu Nov 12 20:20:18 2020 kern.err kernel: [ 5.837897] dwc3-qcom 110f8800.usb3: IRQ ss_phy_irq not found
Thu Nov 12 20:20:18 2020 kern.err kernel: [ 5.848168] dwc3-qcom 100f8800.usb3: IRQ hs_phy_irq not found
Thu Nov 12 20:20:18 2020 kern.err kernel: [ 5.849458] dwc3-qcom 100f8800.usb3: IRQ dp_hs_phy_irq not found
Thu Nov 12 20:20:18 2020 kern.err kernel: [ 5.855256] dwc3-qcom 100f8800.usb3: IRQ dm_hs_phy_irq not found
Thu Nov 12 20:20:18 2020 kern.err kernel: [ 5.861265] dwc3-qcom 100f8800.usb3: IRQ ss_phy_irq not found
Thu Nov 12 20:20:18 2020 kern.err kernel: [ 5.868640] dwc3 11000000.dwc3: Failed to get clk 'ref': -2
Thu Nov 12 20:20:18 2020 kern.err kernel: [ 5.966345] dwc3 10000000.dwc3: Failed to get clk 'ref': -2
Thu Nov 12 20:20:18 2020 kern.info kernel: [ 6.065308] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
Thu Nov 12 20:20:18 2020 kern.info kernel: [ 6.065371] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1
Thu Nov 12 20:20:18 2020 kern.info kernel: [ 6.069909] xhci-hcd xhci-hcd.0.auto: hcc params 0x0228f065 hci version 0x100 quirks 0x0000000002010010
Thu Nov 12 20:20:18 2020 kern.info kernel: [ 6.077404] xhci-hcd xhci-hcd.0.auto: irq 42, io mem 0x11000000
Thu Nov 12 20:20:18 2020 kern.info kernel: [ 6.087837] hub 1-0:1.0: USB hub found
Thu Nov 12 20:20:18 2020 kern.info kernel: [ 6.092573] hub 1-0:1.0: 1 port detected
Thu Nov 12 20:20:18 2020 kern.info kernel: [ 6.096629] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
Thu Nov 12 20:20:18 2020 kern.info kernel: [ 6.100429] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2
Thu Nov 12 20:20:18 2020 kern.info kernel: [ 6.105784] xhci-hcd xhci-hcd.0.auto: Host supports USB 3.0 SuperSpeed
Thu Nov 12 20:20:18 2020 kern.info kernel: [ 6.113833] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
Thu Nov 12 20:20:18 2020 kern.info kernel: [ 6.120284] hub 2-0:1.0: USB hub found
Thu Nov 12 20:20:18 2020 kern.info kernel: [ 6.128199] hub 2-0:1.0: 1 port detected
Thu Nov 12 20:20:18 2020 kern.info kernel: [ 6.131944] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller
Thu Nov 12 20:20:18 2020 kern.info kernel: [ 6.135835] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 3
Thu Nov 12 20:20:18 2020 kern.info kernel: [ 6.141174] xhci-hcd xhci-hcd.1.auto: hcc params 0x0228f065 hci version 0x100 quirks 0x0000000002010010
Thu Nov 12 20:20:18 2020 kern.info kernel: [ 6.148691] xhci-hcd xhci-hcd.1.auto: irq 43, io mem 0x10000000
Thu Nov 12 20:20:18 2020 kern.info kernel: [ 6.158581] hub 3-0:1.0: USB hub found
Thu Nov 12 20:20:18 2020 kern.info kernel: [ 6.163965] hub 3-0:1.0: 1 port detected
Thu Nov 12 20:20:18 2020 kern.info kernel: [ 6.167892] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller
Thu Nov 12 20:20:18 2020 kern.info kernel: [ 6.171773] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 4
Thu Nov 12 20:20:18 2020 kern.info kernel: [ 6.177133] xhci-hcd xhci-hcd.1.auto: Host supports USB 3.0 SuperSpeed
Thu Nov 12 20:20:18 2020 kern.info kernel: [ 6.185338] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
Thu Nov 12 20:20:18 2020 kern.info kernel: [ 6.191568] hub 4-0:1.0: USB hub found
Thu Nov 12 20:20:18 2020 kern.info kernel: [ 6.199559] hub 4-0:1.0: 1 port detected
Thu Nov 12 20:20:18 2020 user.info kernel: [ 6.204241] kmodloader: done loading kernel modules from /etc/modules-boot.d/*
Thu Nov 12 20:20:18 2020 user.info kernel: [ 6.213441] init: - preinit -
Thu Nov 12 20:20:18 2020 kern.info kernel: [ 8.398449] dwmac1000: Master AXI performs any burst length
Thu Nov 12 20:20:18 2020 kern.info kernel: [ 8.398497] ipq806x-gmac-dwmac 37400000.ethernet eth1: No Safety Features support found
Thu Nov 12 20:20:18 2020 kern.info kernel: [ 8.402930] ipq806x-gmac-dwmac 37400000.ethernet eth1: IEEE 1588-2008 Advanced Timestamp supported
Thu Nov 12 20:20:18 2020 kern.info kernel: [ 8.411005] ipq806x-gmac-dwmac 37400000.ethernet eth1: registered PTP clock
Thu Nov 12 20:20:18 2020 kern.info kernel: [ 8.419977] ipq806x-gmac-dwmac 37400000.ethernet eth1: configuring for fixed/sgmii link mode
Thu Nov 12 20:20:18 2020 kern.info kernel: [ 8.427983] ipq806x-gmac-dwmac 37400000.ethernet eth1: Link is Up - 1Gbps/Full - flow control off
Thu Nov 12 20:20:18 2020 kern.info kernel: [ 8.435504] IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
Thu Nov 12 20:20:18 2020 kern.notice kernel: [ 12.626695] UBIFS (ubi0:1): Mounting in unauthenticated mode
Thu Nov 12 20:20:18 2020 kern.notice kernel: [ 12.627905] UBIFS (ubi0:1): background thread "ubifs_bgt0_1" started, PID 164
Thu Nov 12 20:20:18 2020 kern.notice kernel: [ 12.936033] UBIFS (ubi0:1): UBIFS: mounted UBI device 0, volume 1, name "rootfs_data"
Thu Nov 12 20:20:18 2020 kern.notice kernel: [ 12.936082] UBIFS (ubi0:1): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
Thu Nov 12 20:20:18 2020 kern.notice kernel: [ 12.942981] UBIFS (ubi0:1): FS size: 29966336 bytes (28 MiB, 236 LEBs), journal size 1523712 bytes (1 MiB, 12 LEBs)
Thu Nov 12 20:20:18 2020 kern.notice kernel: [ 12.952754] UBIFS (ubi0:1): reserved for root: 1415383 bytes (1382 KiB)
Thu Nov 12 20:20:18 2020 kern.notice kernel: [ 12.963088] UBIFS (ubi0:1): media format: w5/r0 (latest is w5/r0), UUID 8931B579-257A-4616-9377-4EBA30E90C6A, small LPT model
Thu Nov 12 20:20:18 2020 user.info kernel: [ 12.983506] mount_root: overlay filesystem has not been fully initialized yet
Thu Nov 12 20:20:18 2020 user.info kernel: [ 12.983846] mount_root: switching to ubifs overlay
Thu Nov 12 20:20:18 2020 user.warn kernel: [ 13.327651] urandom-seed: Seed file not found (/etc/urandom.seed)
Thu Nov 12 20:20:18 2020 kern.info kernel: [ 13.385488] ipq806x-gmac-dwmac 37400000.ethernet eth1: Link is Down
Thu Nov 12 20:20:18 2020 user.info kernel: [ 13.446916] procd: - early -
Thu Nov 12 20:20:18 2020 user.info kernel: [ 13.447111] procd: - watchdog -
Thu Nov 12 20:20:18 2020 user.info kernel: [ 14.025072] procd: - watchdog -
Thu Nov 12 20:20:18 2020 user.info kernel: [ 14.025689] procd: - ubus -
Thu Nov 12 20:20:18 2020 user.info kernel: [ 14.185163] procd: - init -
Thu Nov 12 20:20:18 2020 user.info kernel: [ 14.698780] urngd: v1.0.2 started.
Thu Nov 12 20:20:18 2020 user.info kernel: [ 14.731909] kmodloader: loading kernel modules from /etc/modules.d/*
Thu Nov 12 20:20:18 2020 kern.info kernel: [ 14.739808] Loading modules backported from Linux version v5.8-0-gbcf876870b95
Thu Nov 12 20:20:18 2020 kern.info kernel: [ 14.739832] Backport generated by backports.git v5.8-1-0-g79400d9e
Thu Nov 12 20:20:18 2020 kern.info kernel: [ 14.754926] xt_time: kernel timezone is -0000
Thu Nov 12 20:20:18 2020 kern.info kernel: [ 14.785169] PPP generic driver version 2.4.2
Thu Nov 12 20:20:18 2020 kern.info kernel: [ 14.786097] NET: Registered protocol family 24
Thu Nov 12 20:20:18 2020 kern.debug kernel: [ 14.804480] ath10k_pci 0000:01:00.0: assign IRQ: got 35
Thu Nov 12 20:20:18 2020 kern.info kernel: [ 14.804503] ath10k 5.4 driver, optimized for CT firmware, probing pci device: 0x40.
Thu Nov 12 20:20:18 2020 kern.err kernel: [ 14.804569] ath10k_mac_create, priv_size: 868 hw: 0563494e hw->priv: d6ed336d
Thu Nov 12 20:20:18 2020 kern.info kernel: [ 14.812241] ath10k_pci 0000:01:00.0: enabling device (0140 -> 0142)
Thu Nov 12 20:20:18 2020 kern.debug kernel: [ 14.818405] ath10k_pci 0000:01:00.0: enabling bus mastering
Thu Nov 12 20:20:18 2020 kern.info kernel: [ 14.818989] ath10k_pci 0000:01:00.0: pci irq msi oper_irq_mode 2 irq_mode 0 reset_mode 0
Thu Nov 12 20:20:18 2020 kern.info kernel: [ 15.944067] ath10k_pci 0000:01:00.0: qca99x0 hw2.0 target 0x01000000 chip_id 0x003b01ff sub 168c:0002
Thu Nov 12 20:20:18 2020 kern.info kernel: [ 15.944106] ath10k_pci 0000:01:00.0: kconfig debug 0 debugfs 1 tracing 0 dfs 1 testmode 0
Thu Nov 12 20:20:18 2020 kern.info kernel: [ 15.954537] ath10k_pci 0000:01:00.0: firmware ver 10.4b-ct-9980-fW-13-10af6a005 api 5 features mfp,peer-flow-ctrl,txstatus-noack,wmi-10.x-CT,ratemask-CT,regdump-CT,txrate-CT,flush-all-CT,pingpong-CT,ch-regs-CT,nop-CT,set-special-CT,tx-rc-CT,cust-stats-CT,txrate2-CT,beacon-cb-CT,wmi-block-ack-CT,wmi-bcn-rc-CT crc32 4a0fa880
Thu Nov 12 20:20:18 2020 kern.info kernel: [ 16.025610] ath10k_pci 0000:01:00.0: board_file api 2 bmi_id 1:2 crc32 08fa09f2
Thu Nov 12 20:20:18 2020 kern.warn kernel: [ 17.214899] ath10k_pci 0000:01:00.0: unsupported HTC service id: 1536
Thu Nov 12 20:20:18 2020 kern.warn kernel: [ 17.218003] ath10k_pci 0000:01:00.0: 10.4 wmi init: vdevs: 16 peers: 48 tid: 96
Thu Nov 12 20:20:18 2020 kern.warn kernel: [ 17.220318] ath10k_pci 0000:01:00.0: msdu-desc: 2500 skid: 32
Thu Nov 12 20:20:18 2020 kern.info kernel: [ 17.300815] ath10k_pci 0000:01:00.0: wmi print 'P 48/48 V 16 K 144 PH 176 T 186 msdu-desc: 2500 sw-crypt: 0 ct-sta: 0'
Thu Nov 12 20:20:18 2020 kern.info kernel: [ 17.300854] ath10k_pci 0000:01:00.0: wmi print 'free: 31080 iram: 23092 sram: 9596'
Thu Nov 12 20:20:18 2020 kern.info kernel: [ 17.598372] ath10k_pci 0000:01:00.0: htt-ver 2.2 wmi-op 6 htt-op 4 cal pre-cal-file max-sta 32 raw 0 hwcrypto 1
Thu Nov 12 20:20:18 2020 kern.debug kernel: [ 17.695172] ath: EEPROM regdomain sanitized
Thu Nov 12 20:20:18 2020 kern.debug kernel: [ 17.695191] ath: EEPROM regdomain: 0x64
Thu Nov 12 20:20:18 2020 kern.debug kernel: [ 17.695202] ath: EEPROM indicates we should expect a direct regpair map
Thu Nov 12 20:20:18 2020 kern.debug kernel: [ 17.695224] ath: Country alpha2 being used: 00
Thu Nov 12 20:20:18 2020 kern.debug kernel: [ 17.695235] ath: Regpair used: 0x64
Thu Nov 12 20:20:18 2020 kern.debug kernel: [ 17.700236] ath10k_pci 0001:01:00.0: assign IRQ: got 37
Thu Nov 12 20:20:18 2020 kern.info kernel: [ 17.700274] ath10k 5.4 driver, optimized for CT firmware, probing pci device: 0x40.
Thu Nov 12 20:20:18 2020 kern.err kernel: [ 17.700402] ath10k_mac_create, priv_size: 868 hw: c2d04b42 hw->priv: 21a5082f
Thu Nov 12 20:20:18 2020 kern.info kernel: [ 17.707602] ath10k_pci 0001:01:00.0: enabling device (0140 -> 0142)
Thu Nov 12 20:20:18 2020 kern.debug kernel: [ 17.714152] ath10k_pci 0001:01:00.0: enabling bus mastering
Thu Nov 12 20:20:18 2020 kern.info kernel: [ 17.714675] ath10k_pci 0001:01:00.0: pci irq msi oper_irq_mode 2 irq_mode 0 reset_mode 0
Thu Nov 12 20:20:18 2020 kern.info kernel: [ 18.449176] ath10k_pci 0001:01:00.0: qca99x0 hw2.0 target 0x01000000 chip_id 0x003b01ff sub 168c:0002
Thu Nov 12 20:20:18 2020 kern.info kernel: [ 18.449209] ath10k_pci 0001:01:00.0: kconfig debug 0 debugfs 1 tracing 0 dfs 1 testmode 0
Thu Nov 12 20:20:18 2020 kern.info kernel: [ 18.459477] ath10k_pci 0001:01:00.0: firmware ver 10.4b-ct-9980-fW-13-10af6a005 api 5 features mfp,peer-flow-ctrl,txstatus-noack,wmi-10.x-CT,ratemask-CT,regdump-CT,txrate-CT,flush-all-CT,pingpong-CT,ch-regs-CT,nop-CT,set-special-CT,tx-rc-CT,cust-stats-CT,txrate2-CT,beacon-cb-CT,wmi-block-ack-CT,wmi-bcn-rc-CT crc32 4a0fa880
Thu Nov 12 20:20:18 2020 kern.info kernel: [ 18.531268] ath10k_pci 0001:01:00.0: board_file api 2 bmi_id 1:1 crc32 08fa09f2
Thu Nov 12 20:20:18 2020 kern.warn kernel: [ 19.721533] ath10k_pci 0001:01:00.0: unsupported HTC service id: 1536
Thu Nov 12 20:20:18 2020 kern.warn kernel: [ 19.724719] ath10k_pci 0001:01:00.0: 10.4 wmi init: vdevs: 16 peers: 48 tid: 96
Thu Nov 12 20:20:18 2020 kern.warn kernel: [ 19.726958] ath10k_pci 0001:01:00.0: msdu-desc: 2500 skid: 32
Thu Nov 12 20:20:18 2020 kern.info kernel: [ 19.805298] ath10k_pci 0001:01:00.0: wmi print 'P 48/48 V 16 K 144 PH 176 T 186 msdu-desc: 2500 sw-crypt: 0 ct-sta: 0'
Thu Nov 12 20:20:18 2020 kern.info kernel: [ 19.805359] ath10k_pci 0001:01:00.0: wmi print 'free: 31080 iram: 23092 sram: 9596'
Thu Nov 12 20:20:18 2020 kern.info kernel: [ 20.079050] ath10k_pci 0001:01:00.0: htt-ver 2.2 wmi-op 6 htt-op 4 cal pre-cal-file max-sta 32 raw 0 hwcrypto 1
Thu Nov 12 20:20:18 2020 kern.debug kernel: [ 20.174331] ath: EEPROM regdomain sanitized
Thu Nov 12 20:20:18 2020 kern.debug kernel: [ 20.174350] ath: EEPROM regdomain: 0x64
Thu Nov 12 20:20:18 2020 kern.debug kernel: [ 20.174361] ath: EEPROM indicates we should expect a direct regpair map
Thu Nov 12 20:20:18 2020 kern.debug kernel: [ 20.174385] ath: Country alpha2 being used: 00
Thu Nov 12 20:20:18 2020 kern.debug kernel: [ 20.174394] ath: Regpair used: 0x64
Thu Nov 12 20:20:18 2020 user.info kernel: [ 20.188134] kmodloader: done loading kernel modules from /etc/modules.d/*
Thu Nov 12 20:20:18 2020 user.notice dnsmasq: DNS rebinding protection is active, will discard upstream RFC1918 responses!
Thu Nov 12 20:20:18 2020 user.notice dnsmasq: Allowing 127.0.0.0/8 responses
Thu Nov 12 20:20:18 2020 daemon.info dnsmasq[859]: Connected to system UBus
Thu Nov 12 20:20:18 2020 daemon.info dnsmasq[859]: started, version 2.82 cachesize 150
Thu Nov 12 20:20:18 2020 daemon.info dnsmasq[859]: DNS service limited to local subnets
Thu Nov 12 20:20:18 2020 daemon.info dnsmasq[859]: compile time options: IPv6 GNU-getopt no-DBus UBus no-i18n no-IDN DHCP no-DHCPv6 no-Lua TFTP no-conntrack no-ipset no-auth no-DNSSEC no-ID loop-detect inotify dumpfile
Thu Nov 12 20:20:18 2020 daemon.info dnsmasq[859]: UBus support enabled: connected to system bus
Thu Nov 12 20:20:18 2020 daemon.info dnsmasq[859]: using only locally-known addresses for domain test
Thu Nov 12 20:20:18 2020 daemon.info dnsmasq[859]: using only locally-known addresses for domain onion
Thu Nov 12 20:20:18 2020 daemon.info dnsmasq[859]: using only locally-known addresses for domain localhost
Thu Nov 12 20:20:18 2020 daemon.info dnsmasq[859]: using only locally-known addresses for domain local
Thu Nov 12 20:20:18 2020 daemon.info dnsmasq[859]: using only locally-known addresses for domain invalid
Thu Nov 12 20:20:18 2020 daemon.info dnsmasq[859]: using only locally-known addresses for domain bind
Thu Nov 12 20:20:18 2020 daemon.info dnsmasq[859]: using only locally-known addresses for domain lan
Thu Nov 12 20:20:18 2020 daemon.warn dnsmasq[859]: no servers found in /tmp/resolv.conf.d/resolv.conf.auto, will retry
Thu Nov 12 20:20:18 2020 daemon.info dnsmasq[859]: read /etc/hosts - 4 addresses
Thu Nov 12 20:20:18 2020 daemon.info dnsmasq[859]: read /tmp/hosts/dhcp.cfg01411c - 0 addresses
Thu Nov 12 20:20:18 2020 authpriv.info dropbear[921]: Not backgrounding
Thu Nov 12 20:20:19 2020 daemon.notice wpa_supplicant[1030]: Successfully initialized wpa_supplicant
Thu Nov 12 20:20:20 2020 user.notice : Added device handler type: 8021ad
Thu Nov 12 20:20:20 2020 user.notice : Added device handler type: 8021q
Thu Nov 12 20:20:20 2020 user.notice : Added device handler type: macvlan
Thu Nov 12 20:20:20 2020 user.notice : Added device handler type: veth
Thu Nov 12 20:20:20 2020 user.notice : Added device handler type: bridge
Thu Nov 12 20:20:20 2020 user.notice : Added device handler type: Network device
Thu Nov 12 20:20:20 2020 user.notice : Added device handler type: tunnel
Thu Nov 12 20:20:21 2020 kern.info kernel: [ 25.425459] dwmac1000: Master AXI performs any burst length
Thu Nov 12 20:20:21 2020 kern.info kernel: [ 25.425509] ipq806x-gmac-dwmac 37400000.ethernet eth1: No Safety Features support found
Thu Nov 12 20:20:21 2020 kern.info kernel: [ 25.429857] ipq806x-gmac-dwmac 37400000.ethernet eth1: IEEE 1588-2008 Advanced Timestamp supported
Thu Nov 12 20:20:21 2020 kern.info kernel: [ 25.438023] ipq806x-gmac-dwmac 37400000.ethernet eth1: registered PTP clock
Thu Nov 12 20:20:21 2020 kern.info kernel: [ 25.446946] ipq806x-gmac-dwmac 37400000.ethernet eth1: configuring for fixed/sgmii link mode
Thu Nov 12 20:20:21 2020 kern.info kernel: [ 25.454066] ipq806x-gmac-dwmac 37400000.ethernet eth1: Link is Up - 1Gbps/Full - flow control off
Thu Nov 12 20:20:21 2020 kern.info kernel: [ 25.457497] br-lan: port 1(eth1.1) entered blocking state
Thu Nov 12 20:20:21 2020 kern.info kernel: [ 25.471284] br-lan: port 1(eth1.1) entered disabled state
Thu Nov 12 20:20:21 2020 kern.info kernel: [ 25.476838] device eth1.1 entered promiscuous mode
Thu Nov 12 20:20:21 2020 kern.info kernel: [ 25.481921] device eth1 entered promiscuous mode
Thu Nov 12 20:20:21 2020 kern.info kernel: [ 25.488315] br-lan: port 1(eth1.1) entered blocking state
Thu Nov 12 20:20:21 2020 kern.info kernel: [ 25.491389] br-lan: port 1(eth1.1) entered forwarding state
Thu Nov 12 20:20:21 2020 daemon.notice netifd: Interface 'lan' is enabled
Thu Nov 12 20:20:21 2020 daemon.notice netifd: Interface 'lan' is setting up now
Thu Nov 12 20:20:21 2020 daemon.debug dnsmasq[859]: listening on br-lan(#7): 192.168.50.1 port 53
Thu Nov 12 20:20:21 2020 daemon.notice netifd: Interface 'lan' is now up
Thu Nov 12 20:20:21 2020 daemon.notice netifd: bridge 'br-lan' link is up
Thu Nov 12 20:20:21 2020 daemon.notice netifd: Interface 'lan' has link connectivity
Thu Nov 12 20:20:21 2020 daemon.notice netifd: VLAN 'eth1.1' link is up
Thu Nov 12 20:20:21 2020 daemon.debug dnsmasq[859]: listening on lo(#1): 127.0.0.1 port 53
Thu Nov 12 20:20:21 2020 daemon.debug dnsmasq[859]: listening on lo(#1): ::1 port 53
Thu Nov 12 20:20:21 2020 daemon.notice netifd: Interface 'loopback' is enabled
Thu Nov 12 20:20:21 2020 daemon.notice netifd: Interface 'loopback' is setting up now
Thu Nov 12 20:20:21 2020 daemon.notice netifd: Interface 'loopback' is now up
Thu Nov 12 20:20:21 2020 daemon.notice netifd: Network device 'eth1' link is up
Thu Nov 12 20:20:21 2020 daemon.notice netifd: Network device 'lo' link is up
Thu Nov 12 20:20:21 2020 daemon.notice netifd: Interface 'loopback' has link connectivity
Thu Nov 12 20:20:22 2020 user.notice firewall: Reloading firewall due to ifup of lan (br-lan)
Thu Nov 12 20:20:22 2020 daemon.notice procd: /etc/rc.d/S99bootcount: Boot count sucessfully reset to zero.
Thu Nov 12 20:20:22 2020 daemon.info procd: - init complete -
Thu Nov 12 20:20:22 2020 daemon.info urandom_seed[1487]: Seed saved (/etc/urandom.seed)
Thu Nov 12 20:20:22 2020 kern.info kernel: [ 26.474577] IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
Thu Nov 12 20:20:22 2020 kern.info kernel: [ 26.475583] IPv6: ADDRCONF(NETDEV_CHANGE): br-lan: link becomes ready
Thu Nov 12 20:20:22 2020 daemon.err odhcpd[1138]: Failed to send to ff02::1%lan@br-lan (Address not available)
Thu Nov 12 20:20:24 2020 daemon.debug dnsmasq[859]: listening on br-lan(#7): fd5c:7678:93f2::1 port 53
Thu Nov 12 20:20:24 2020 daemon.debug dnsmasq[859]: listening on eth1(#3): fe80::9ceb:13ff:fe3b:be2%eth1 port 53
Thu Nov 12 20:20:24 2020 daemon.debug dnsmasq[859]: listening on br-lan(#7): fe80::1691:82ff:fe83:c98%br-lan port 53
Thu Nov 12 20:20:25 2020 authpriv.info dropbear[1589]: Child connection from 192.168.50.218:55112
Thu Nov 12 20:20:25 2020 authpriv.notice dropbear[1589]: Auth succeeded with blank password for 'root' from 192.168.50.218:55112
Thu Nov 12 20:20:27 2020 daemon.info dnsmasq[859]: exiting on receipt of SIGTERM
Thu Nov 12 20:20:27 2020 daemon.info dnsmasq[1639]: Connected to system UBus
Thu Nov 12 20:20:27 2020 daemon.info dnsmasq[1639]: started, version 2.82 cachesize 150
Thu Nov 12 20:20:27 2020 daemon.info dnsmasq[1639]: DNS service limited to local subnets
Thu Nov 12 20:20:27 2020 daemon.info dnsmasq[1639]: compile time options: IPv6 GNU-getopt no-DBus UBus no-i18n no-IDN DHCP no-DHCPv6 no-Lua TFTP no-conntrack no-ipset no-auth no-DNSSEC no-ID loop-detect inotify dumpfile
Thu Nov 12 20:20:27 2020 daemon.info dnsmasq[1639]: UBus support enabled: connected to system bus
Thu Nov 12 20:20:27 2020 daemon.info dnsmasq-dhcp[1639]: DHCP, IP range 192.168.50.100 -- 192.168.50.249, lease time 12h
Thu Nov 12 20:20:27 2020 daemon.info dnsmasq[1639]: using only locally-known addresses for domain test
Thu Nov 12 20:20:27 2020 daemon.info dnsmasq[1639]: using only locally-known addresses for domain onion
Thu Nov 12 20:20:27 2020 daemon.info dnsmasq[1639]: using only locally-known addresses for domain localhost
Thu Nov 12 20:20:27 2020 daemon.info dnsmasq[1639]: using only locally-known addresses for domain local
Thu Nov 12 20:20:27 2020 daemon.info dnsmasq[1639]: using only locally-known addresses for domain invalid
Thu Nov 12 20:20:27 2020 daemon.info dnsmasq[1639]: using only locally-known addresses for domain bind
Thu Nov 12 20:20:27 2020 daemon.info dnsmasq[1639]: using only locally-known addresses for domain lan
Thu Nov 12 20:20:27 2020 daemon.warn dnsmasq[1639]: no servers found in /tmp/resolv.conf.d/resolv.conf.auto, will retry
Thu Nov 12 20:20:27 2020 daemon.info dnsmasq[1639]: read /etc/hosts - 4 addresses
Thu Nov 12 20:20:27 2020 daemon.info dnsmasq[1639]: read /tmp/hosts/dhcp.cfg01411c - 2 addresses
Thu Nov 12 20:20:27 2020 daemon.info dnsmasq-dhcp[1639]: read /etc/ethers - 0 addresses
Thu Nov 12 20:20:32 2020 daemon.info dnsmasq[1639]: read /etc/hosts - 4 addresses
Thu Nov 12 20:20:32 2020 daemon.info dnsmasq[1639]: read /tmp/hosts/odhcpd - 1 addresses
Thu Nov 12 20:20:32 2020 daemon.info dnsmasq[1639]: read /tmp/hosts/dhcp.cfg01411c - 2 addresses
Thu Nov 12 20:20:32 2020 daemon.info dnsmasq-dhcp[1639]: read /etc/ethers - 0 addresses

# ip a
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN qlen 1000
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
valid_lft forever preferred_lft forever
inet6 ::1/128 scope host
valid_lft forever preferred_lft forever
2: eth0: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN qlen 1000
link/ether 16:6b:c5:27:96:cf brd ff:ff:ff:ff:ff:ff
3: eth1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP qlen 1000
link/ether 9e:eb:13:3b:0b:e2 brd ff:ff:ff:ff:ff:ff
inet6 fe80::9ceb:13ff:fe3b:be2/64 scope link
valid_lft forever preferred_lft forever
5: wlan0: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN qlen 1000
link/ether 14:91:82:83:0c:99 brd ff:ff:ff:ff:ff:ff
6: wlan1: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN qlen 1000
link/ether 14:91:82:83:0c:9a brd ff:ff:ff:ff:ff:ff
7: br-lan: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue state UP qlen 1000
link/ether 14:91:82:83:0c:98 brd ff:ff:ff:ff:ff:ff
inet 192.168.50.1/24 brd 192.168.50.255 scope global br-lan
valid_lft forever preferred_lft forever
inet6 fd5c:7678:93f2::1/60 scope global
valid_lft forever preferred_lft forever
inet6 fe80::1691:82ff:fe83:c98/64 scope link
valid_lft forever preferred_lft forever
8: eth1.1@eth1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue master br-lan state UP qlen 1000
link/ether 14:91:82:83:0c:98 brd ff:ff:ff:ff:ff:ff

# cat /etc/config/network

config interface 'loopback'
option ifname 'lo'
option proto 'static'
option ipaddr '127.0.0.1'
option netmask '255.0.0.0'

config globals 'globals'
option ula_prefix 'fd5c:7678:93f2::/48'

config interface 'lan'
option type 'bridge'
option ifname 'eth1.1'
option proto 'static'
option ipaddr '192.168.50.1'
option netmask '255.255.255.0'
option ip6assign '60'

config device 'lan_eth1_1_dev'
option name 'eth1.1'
option macaddr 'xxxxx'

config interface 'wan'
option ifname 'eth0.2'
option proto 'dhcp'

config device 'wan_eth0_2_dev'
option name 'eth0.2'
option macaddr 'xxxxx'

config interface 'wan6'
option ifname 'eth0.2'
option proto 'dhcpv6'

config switch
option name 'switch0'
option reset '1'
option enable_vlan '1'

config switch_vlan
option device 'switch0'
option vlan '1'
option ports '2 3 4 5 6t'

config switch_vlan
option device 'switch0'
option vlan '2'
option ports '1 0t'

@openwrt-bot
Copy link
Author

amezin:

I have the same issue on Zyxel Armor Z2 (nbg6817)

[ 0.000000] Booting Linux on physical CPU 0x0
[ 0.000000] Linux version 5.4.75 (amezin@trx40) (gcc version 10.2.0 (OpenWrt GCC 10.2.0 r14740+187-0b31713c85)) #0 SMP Fri Nov 13 00:59:16 2020
[ 0.000000] CPU: ARMv7 Processor [512f04d0] revision 0 (ARMv7), cr=10c5787d
[ 0.000000] CPU: div instructions available: patching division code
[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache
[ 0.000000] OF: fdt: Machine model: ZyXEL NBG6817
[ 0.000000] Memory policy: Data cache writealloc
[ 0.000000] On node 0 totalpages: 122880
[ 0.000000] Normal zone: 960 pages used for memmap
[ 0.000000] Normal zone: 0 pages reserved
[ 0.000000] Normal zone: 122880 pages, LIFO batch:31
[ 0.000000] percpu: Embedded 15 pages/cpu s29900 r8192 d23348 u61440
[ 0.000000] pcpu-alloc: s29900 r8192 d23348 u61440 alloc=154096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 121920
[ 0.000000] Kernel command line: rootfstype=squashfs,ext4 rootwait noinitrd root=/dev/mmcblk0p8
[ 0.000000] Bootloader command line (ignored): board=NBG6817 root=/dev/mmcblk0p8 rootwait zld_ver=2.07 console=ttyHSL1,115200n8 mtdparts=m25p80:0xC0000(SBL)ro,0x40000(TZ)ro,0x40000(RPM)ro,0x80000(u-boot)ro,0x10000(env)ro,0x10000(ART)ro,0x10000(dualflag),0x210000(reserved)
[ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes, linear)
[ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes, linear)
[ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
[ 0.000000] Memory: 477404K/491520K available (5894K kernel code, 167K rwdata, 1476K rodata, 1024K init, 228K bss, 14116K reserved, 0K cma-reserved, 0K highmem)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.000000] rcu: Hierarchical RCU implementation.
[ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies.
[ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
[ 0.000000] random: get_random_bytes called from start_kernel+0x334/0x4b8 with crng_init=0
[ 0.000000] clocksource: dg_timer: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 305801671480 ns
[ 0.000007] sched_clock: 32 bits at 6MHz, resolution 160ns, wraps every 343597383600ns
[ 0.000018] Switching to timer-based delay loop, resolution 160ns
[ 0.000212] Calibrating delay loop (skipped), value calculated using timer frequency.. 12.50 BogoMIPS (lpj=62500)
[ 0.000230] pid_max: default: 32768 minimum: 301
[ 0.000369] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linear)
[ 0.000385] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear)
[ 0.000985] CPU: Testing write buffer coherency: ok
[ 0.001892] Setting up static identity map for 0x42300000 - 0x42300060
[ 0.002034] rcu: Hierarchical SRCU implementation.
[ 0.002425] smp: Bringing up secondary CPUs ...
[ 0.004134] smp: Brought up 1 node, 2 CPUs
[ 0.004147] SMP: Total of 2 processors activated (25.00 BogoMIPS).
[ 0.004156] CPU: All CPU(s) started in SVC mode.
[ 0.013096] VFP support v0.3: implementor 51 architecture 64 part 4d variant 2 rev 0
[ 0.013223] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[ 0.013249] futex hash table entries: 512 (order: 3, 32768 bytes, linear)
[ 0.013346] pinctrl core: initialized pinctrl subsystem
[ 0.014298] NET: Registered protocol family 16
[ 0.014595] DMA: preallocated 256 KiB pool for atomic coherent allocations
[ 0.015818] cpuidle: using governor ladder
[ 0.015873] cpuidle: using governor menu
[ 0.044213] usbcore: registered new interface driver usbfs
[ 0.044286] usbcore: registered new interface driver hub
[ 0.044368] usbcore: registered new device driver usb
[ 0.044419] pps_core: LinuxPPS API ver. 1 registered
[ 0.044431] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti giometti@linux.it
[ 0.044460] PTP clock support registered
[ 0.045152] workqueue: max_active 576 requested for napi_workq is out of range, clamping between 1 and 512
[ 0.046204] clocksource: Switched to clocksource dg_timer
[ 0.046897] thermal_sys: Registered thermal governor 'step_wise'
[ 0.049049] NET: Registered protocol family 2
[ 0.049677] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes, linear)
[ 0.049705] TCP established hash table entries: 4096 (order: 2, 16384 bytes, linear)
[ 0.049742] TCP bind hash table entries: 4096 (order: 3, 32768 bytes, linear)
[ 0.049794] TCP: Hash tables configured (established 4096 bind 4096)
[ 0.049881] UDP hash table entries: 256 (order: 1, 8192 bytes, linear)
[ 0.049908] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear)
[ 0.050096] NET: Registered protocol family 1
[ 0.050139] PCI: CLS 0 bytes, default 64
[ 0.051205] workingset: timestamp_bits=30 max_order=17 bucket_order=0
[ 0.056481] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 0.056494] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
[ 0.096608] qcom-pcie 1b500000.pci: 1b500000.pci supply vdda not found, using dummy regulator
[ 0.096733] qcom-pcie 1b500000.pci: 1b500000.pci supply vdda_phy not found, using dummy regulator
[ 0.096826] qcom-pcie 1b500000.pci: 1b500000.pci supply vdda_refclk not found, using dummy regulator
[ 0.097061] qcom-pcie 1b500000.pci: host bridge /soc/pci@1b500000 ranges:
[ 0.097081] qcom-pcie 1b500000.pci: Parsing ranges property...
[ 0.097123] qcom-pcie 1b500000.pci: IO 0x0fe00000..0x0fefffff -> 0x0fe00000
[ 0.097165] qcom-pcie 1b500000.pci: MEM 0x08000000..0x0fdfffff -> 0x08000000
[ 0.322129] qcom-pcie 1b500000.pci: Link up
[ 0.322267] qcom-pcie 1b500000.pci: PCI host bridge to bus 0000:00
[ 0.322288] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.322305] pci_bus 0000:00: root bus resource [io 0x0000-0xfffff] (bus address [0xfe00000-0xfefffff])
[ 0.322319] pci_bus 0000:00: root bus resource [mem 0x08000000-0x0fdfffff]
[ 0.322333] pci_bus 0000:00: scanning bus
[ 0.322373] pci 0000:00:00.0: [17cb:0101] type 01 class 0xff0000
[ 0.322524] pci 0000:00:00.0: supports D1
[ 0.322537] pci 0000:00:00.0: PME# supported from D0 D1 D3hot
[ 0.322553] pci 0000:00:00.0: PME# disabled
[ 0.326194] pci_bus 0000:00: fixups for bus
[ 0.326213] PCI: bus0: Fast back to back transfers disabled
[ 0.326230] pci 0000:00:00.0: scanning [bus 01-ff] behind bridge, pass 0
[ 0.326340] pci_bus 0000:01: scanning bus
[ 0.326596] pci 0000:01:00.0: [168c:0046] type 00 class 0x028000
[ 0.326949] pci 0000:01:00.0: reg 0x10: [mem 0x00000000-0x001fffff 64bit]
[ 0.328093] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold
[ 0.328138] pci 0000:01:00.0: PME# disabled
[ 0.331947] pci_bus 0000:01: fixups for bus
[ 0.332018] PCI: bus1: Fast back to back transfers disabled
[ 0.332032] pci_bus 0000:01: bus scan returning with max=01
[ 0.332048] pci 0000:00:00.0: scanning [bus 01-ff] behind bridge, pass 1
[ 0.332064] pci_bus 0000:00: bus scan returning with max=ff
[ 0.332095] pci 0000:00:00.0: BAR 8: assigned [mem 0x08000000-0x081fffff]
[ 0.332117] pci 0000:01:00.0: BAR 0: assigned [mem 0x08000000-0x081fffff 64bit]
[ 0.332240] pci 0000:00:00.0: PCI bridge to [bus 01-ff]
[ 0.332260] pci 0000:00:00.0: bridge window [mem 0x08000000-0x081fffff]
[ 0.332430] pcieport 0000:00:00.0: assign IRQ: got 35
[ 0.332871] pcieport 0000:00:00.0: AER: enabled with IRQ 36
[ 0.333359] qcom-pcie 1b700000.pci: 1b700000.pci supply vdda not found, using dummy regulator
[ 0.333460] qcom-pcie 1b700000.pci: 1b700000.pci supply vdda_phy not found, using dummy regulator
[ 0.333552] qcom-pcie 1b700000.pci: 1b700000.pci supply vdda_refclk not found, using dummy regulator
[ 0.333791] qcom-pcie 1b700000.pci: host bridge /soc/pci@1b700000 ranges:
[ 0.333810] qcom-pcie 1b700000.pci: Parsing ranges property...
[ 0.333847] qcom-pcie 1b700000.pci: IO 0x31e00000..0x31efffff -> 0x31e00000
[ 0.333877] qcom-pcie 1b700000.pci: MEM 0x2e000000..0x31dfffff -> 0x2e000000
[ 0.563582] qcom-pcie 1b700000.pci: Link up
[ 0.563713] qcom-pcie 1b700000.pci: PCI host bridge to bus 0001:00
[ 0.563731] pci_bus 0001:00: root bus resource [bus 00-ff]
[ 0.563745] pci_bus 0001:00: root bus resource [mem 0x2e000000-0x31dfffff]
[ 0.563758] pci_bus 0001:00: scanning bus
[ 0.563795] pci 0001:00:00.0: [17cb:0101] type 01 class 0xff0000
[ 0.563937] pci 0001:00:00.0: supports D1
[ 0.563950] pci 0001:00:00.0: PME# supported from D0 D1 D3hot
[ 0.563966] pci 0001:00:00.0: PME# disabled
[ 0.567656] pci_bus 0001:00: fixups for bus
[ 0.567674] PCI: bus0: Fast back to back transfers disabled
[ 0.567691] pci 0001:00:00.0: scanning [bus 01-ff] behind bridge, pass 0
[ 0.567807] pci_bus 0001:01: scanning bus
[ 0.567994] pci 0001:01:00.0: [168c:0046] type 00 class 0x028000
[ 0.568370] pci 0001:01:00.0: reg 0x10: [mem 0x00000000-0x001fffff 64bit]
[ 0.569601] pci 0001:01:00.0: PME# supported from D0 D3hot D3cold
[ 0.569648] pci 0001:01:00.0: PME# disabled
[ 0.569897] pci 0001:01:00.0: 2.000 Gb/s available PCIe bandwidth, limited by 2.5 GT/s x1 link at 0001:00:00.0 (capable of 4.000 Gb/s with 5 GT/s x1 link)
[ 0.573520] pci_bus 0001:01: fixups for bus
[ 0.573595] PCI: bus1: Fast back to back transfers disabled
[ 0.573609] pci_bus 0001:01: bus scan returning with max=01
[ 0.573624] pci 0001:00:00.0: scanning [bus 01-ff] behind bridge, pass 1
[ 0.573641] pci_bus 0001:00: bus scan returning with max=ff
[ 0.573664] pci 0001:00:00.0: BAR 8: assigned [mem 0x2e000000-0x2e1fffff]
[ 0.573686] pci 0001:01:00.0: BAR 0: assigned [mem 0x2e000000-0x2e1fffff 64bit]
[ 0.573816] pci 0001:00:00.0: PCI bridge to [bus 01-ff]
[ 0.573836] pci 0001:00:00.0: bridge window [mem 0x2e000000-0x2e1fffff]
[ 0.573993] pcieport 0001:00:00.0: assign IRQ: got 37
[ 0.574567] pcieport 0001:00:00.0: AER: enabled with IRQ 38
[ 0.576950] L2 @ QSB rate. Forcing new rate.
[ 0.577161] L2 @ 384000 KHz
[ 0.577335] CPU0 @ 800000 KHz
[ 0.577347] CPU1 @ QSB rate. Forcing new rate.
[ 0.577475] CPU1 @ 384000 KHz
[ 0.580813] gsbi 16300000.gsbi: GSBI port protocol: 6 crci: 0
[ 0.582159] gsbi 1a200000.gsbi: GSBI port protocol: 3 crci: 0
[ 0.583731] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled
[ 0.584443] msm_serial 16340000.serial: msm_serial: detected port #0
[ 0.584487] msm_serial 16340000.serial: uartclk = 7372800
[ 0.584548] 16340000.serial: ttyMSM0 at MMIO 0x16340000 (irq = 39, base_baud = 460800) is a MSM
[ 0.584581] msm_serial: console setup on port #0
[ 1.388051] printk: console [ttyMSM0] enabled
[ 1.393013] msm_serial: driver initialized
[ 1.401421] loop: module loaded
[ 1.402428] spi_qup 1a280000.spi: IN:block:16, fifo:64, OUT:block:16, fifo:64
[ 1.406163] spi-nor spi0.0: mx25u3235f (4096 Kbytes)
[ 1.411570] 13 qcom-smem partitions found on MTD device spi0.0
[ 1.416527] Creating 13 MTD partitions on "spi0.0":
[ 1.422091] 0x000000000000-0x000000020000 : "0:SBL1"
[ 1.427742] 0x000000020000-0x000000040000 : "0:MIBIB"
[ 1.432839] 0x000000040000-0x000000060000 : "0:SBL2"
[ 1.437817] 0x000000060000-0x0000000a0000 : "0:SBL3"
[ 1.442784] 0x0000000a0000-0x0000000b0000 : "0:DDRCONFIG"
[ 1.447845] 0x0000000b0000-0x0000000c0000 : "0:SSD"
[ 1.453035] 0x0000000c0000-0x000000100000 : "0:TZ"
[ 1.457779] 0x000000100000-0x000000140000 : "0:RPM"
[ 1.462594] 0x000000140000-0x0000001c0000 : "0:APPSBL"
[ 1.467452] 0x0000001c0000-0x0000001d0000 : "0:APPSBLENV"
[ 1.472597] 0x0000001d0000-0x0000001e0000 : "0:ART"
[ 1.478131] 0x0000001e0000-0x0000001f0000 : "0:DUAL_FLAG"
[ 1.482745] 0x0000001f0000-0x000000400000 : "0:RESERVED"
[ 1.489508] libphy: ipq8064_mdio_bus: probed
[ 1.508078] switch0: Atheros AR8337 rev. 2 switch registered on 37000000.mdio-mii
[ 2.352732] ar8327: qca,phy-rgmii-en is not specified
[ 2.353230] libphy: Fixed MDIO Bus: probed
[ 2.357490] ipq806x-gmac-dwmac 37200000.ethernet: IRQ eth_wake_irq not found
[ 2.360761] ipq806x-gmac-dwmac 37200000.ethernet: IRQ eth_lpi not found
[ 2.368239] ipq806x-gmac-dwmac 37200000.ethernet: PTP uses main clock
[ 2.374800] ipq806x-gmac-dwmac 37200000.ethernet: User ID: 0x10, Synopsys ID: 0x37
[ 2.380987] ipq806x-gmac-dwmac 37200000.ethernet: DWMAC1000
[ 2.388439] ipq806x-gmac-dwmac 37200000.ethernet: DMA HW capability register supported
[ 2.394180] ipq806x-gmac-dwmac 37200000.ethernet: RX Checksum Offload Engine supported
[ 2.401963] ipq806x-gmac-dwmac 37200000.ethernet: COE Type 2
[ 2.409866] ipq806x-gmac-dwmac 37200000.ethernet: TX Checksum insertion supported
[ 2.415620] ipq806x-gmac-dwmac 37200000.ethernet: Wake-Up On Lan supported
[ 2.423081] ipq806x-gmac-dwmac 37200000.ethernet: Enhanced/Alternate descriptors
[ 2.429828] ipq806x-gmac-dwmac 37200000.ethernet: Enabled extended descriptors
[ 2.437388] ipq806x-gmac-dwmac 37200000.ethernet: Ring mode enabled
[ 2.444350] ipq806x-gmac-dwmac 37200000.ethernet: Enable RX Mitigation via HW Watchdog Timer
[ 2.450612] ipq806x-gmac-dwmac 37200000.ethernet: device MAC address aa:1c:6c:73:bc:63
[ 2.460032] ipq806x-gmac-dwmac 37400000.ethernet: IRQ eth_wake_irq not found
[ 2.467007] ipq806x-gmac-dwmac 37400000.ethernet: IRQ eth_lpi not found
[ 2.474315] ipq806x-gmac-dwmac 37400000.ethernet: PTP uses main clock
[ 2.480782] ipq806x-gmac-dwmac 37400000.ethernet: User ID: 0x10, Synopsys ID: 0x37
[ 2.487136] ipq806x-gmac-dwmac 37400000.ethernet: DWMAC1000
[ 2.494525] ipq806x-gmac-dwmac 37400000.ethernet: DMA HW capability register supported
[ 2.500443] ipq806x-gmac-dwmac 37400000.ethernet: RX Checksum Offload Engine supported
[ 2.508148] ipq806x-gmac-dwmac 37400000.ethernet: COE Type 2
[ 2.515964] ipq806x-gmac-dwmac 37400000.ethernet: TX Checksum insertion supported
[ 2.521861] ipq806x-gmac-dwmac 37400000.ethernet: Wake-Up On Lan supported
[ 2.529234] ipq806x-gmac-dwmac 37400000.ethernet: Enhanced/Alternate descriptors
[ 2.535932] ipq806x-gmac-dwmac 37400000.ethernet: Enabled extended descriptors
[ 2.543573] ipq806x-gmac-dwmac 37400000.ethernet: Ring mode enabled
[ 2.550571] ipq806x-gmac-dwmac 37400000.ethernet: Enable RX Mitigation via HW Watchdog Timer
[ 2.556772] ipq806x-gmac-dwmac 37400000.ethernet: device MAC address 8e:65:b0:64:8c:d0
[ 2.566248] i2c /dev entries driver
[ 2.575225] cpuidle: enable-method property 'qcom,kpss-acc-v1' found operations
[ 2.576662] cpuidle: enable-method property 'qcom,kpss-acc-v1' found operations
[ 2.584648] mmci-pl18x 12400000.sdcc: mmc0: PL180 manf 51 rev0 at 0x12400000 irq 34,0 (pio)
[ 2.591255] mmci-pl18x 12400000.sdcc: DMA channels RX dma0chan1, TX dma0chan2
[ 2.625560] sdhci: Secure Digital Host Controller Interface driver
[ 2.625588] sdhci: Copyright(c) Pierre Ossman
[ 2.630710] sdhci-pltfm: SDHCI platform and OF driver helper
[ 2.637208] NET: Registered protocol family 10
[ 2.641982] Segment Routing with IPv6
[ 2.645122] NET: Registered protocol family 17
[ 2.648906] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
[ 2.653442] 8021q: 802.1Q VLAN Support v1.8
[ 2.666398] Registering SWP/SWPB emulation handler
[ 2.691536] qcom_rpm 108000.rpm: RPM firmware 3.0.16777364
[ 2.704747] s1a: Bringing 0uV into 1050000-1050000uV
[ 2.704984] s1a: supplied by regulator-dummy
[ 2.709003] s1b: Bringing 0uV into 1050000-1050000uV
[ 2.713219] s1b: supplied by regulator-dummy
[ 2.718178] s2a: Bringing 0uV into 775000-775000uV
[ 2.722433] s2a: supplied by regulator-dummy
[ 2.727044] s2b: Bringing 0uV into 775000-775000uV
[ 2.731448] s2b: supplied by regulator-dummy
[ 2.744356] hctosys: unable to open rtc device (rtc0)
[ 2.744798] Waiting for root device /dev/mmcblk0p8...
[ 2.778020] mmc0: new high speed MMC card at address 0001
[ 2.778914] mmcblk0: mmc0:0001 M62704 3.53 GiB
[ 2.782709] mmcblk0boot0: mmc0:0001 M62704 partition 1 2.00 MiB
[ 2.786983] mmcblk0boot1: mmc0:0001 M62704 partition 2 2.00 MiB
[ 2.792702] mmcblk0rpmb: mmc0:0001 M62704 partition 3 512 KiB, chardev (248:0)
[ 2.800768] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10
[ 2.829918] VFS: Mounted root (squashfs filesystem) readonly on device 179:8.
[ 2.832072] Freeing unused kernel memory: 1024K
[ 2.857101] Run /sbin/init as init process
[ 2.978351] random: fast init done
[ 3.039593] init: Console is alive
[ 3.039706] init: - watchdog -
[ 3.646305] kmodloader: loading kernel modules from /etc/modules-boot.d/

[ 3.673889] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 3.676592] SCSI subsystem initialized
[ 3.682878] libata version 3.00 loaded.
[ 3.685923] ehci-fsl: Freescale EHCI Host controller driver
[ 3.686412] ehci-platform: EHCI generic platform driver
[ 3.693389] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 3.695909] ohci-platform: OHCI generic platform driver
[ 3.704379] dwc3-qcom 110f8800.usb3: IRQ hs_phy_irq not found
[ 3.706955] dwc3-qcom 110f8800.usb3: IRQ dp_hs_phy_irq not found
[ 3.712773] dwc3-qcom 110f8800.usb3: IRQ dm_hs_phy_irq not found
[ 3.718915] dwc3-qcom 110f8800.usb3: IRQ ss_phy_irq not found
[ 3.726528] dwc3-qcom 100f8800.usb3: IRQ hs_phy_irq not found
[ 3.730481] dwc3-qcom 100f8800.usb3: IRQ dp_hs_phy_irq not found
[ 3.736211] dwc3-qcom 100f8800.usb3: IRQ dm_hs_phy_irq not found
[ 3.742356] dwc3-qcom 100f8800.usb3: IRQ ss_phy_irq not found
[ 3.759084] dwc3 11000000.dwc3: Failed to get clk 'ref': -2
[ 3.816850] dwc3 10000000.dwc3: Failed to get clk 'ref': -2
[ 3.886118] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
[ 3.886162] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1
[ 3.890731] xhci-hcd xhci-hcd.0.auto: hcc params 0x0228f065 hci version 0x100 quirks 0x0000000002010010
[ 3.898184] xhci-hcd xhci-hcd.0.auto: irq 44, io mem 0x11000000
[ 3.908239] hub 1-0:1.0: USB hub found
[ 3.913349] hub 1-0:1.0: 1 port detected
[ 3.917383] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
[ 3.921234] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2
[ 3.926594] xhci-hcd xhci-hcd.0.auto: Host supports USB 3.0 SuperSpeed
[ 3.934143] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
[ 3.941735] hub 2-0:1.0: USB hub found
[ 3.948989] hub 2-0:1.0: 1 port detected
[ 3.952712] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller
[ 3.956628] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 3
[ 3.961971] xhci-hcd xhci-hcd.1.auto: hcc params 0x0228f065 hci version 0x100 quirks 0x0000000002010010
[ 3.969486] xhci-hcd xhci-hcd.1.auto: irq 45, io mem 0x10000000
[ 3.979302] hub 3-0:1.0: USB hub found
[ 3.984694] hub 3-0:1.0: 1 port detected
[ 3.988702] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller
[ 3.992577] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 4
[ 3.997955] xhci-hcd xhci-hcd.1.auto: Host supports USB 3.0 SuperSpeed
[ 4.006840] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
[ 4.012313] hub 4-0:1.0: USB hub found
[ 4.020346] hub 4-0:1.0: 1 port detected
[ 4.025157] kmodloader: done loading kernel modules from /etc/modules-boot.d/*
[ 4.034331] init: - preinit -
[ 4.311210] random: jshn: uninitialized urandom read (4 bytes read)
[ 4.328981] random: jshn: uninitialized urandom read (4 bytes read)
[ 4.504354] random: jshn: uninitialized urandom read (4 bytes read)
[ 5.563274] dwmac1000: Master AXI performs any burst length
[ 5.563318] ipq806x-gmac-dwmac 37400000.ethernet eth1: No Safety Features support found
[ 5.567758] ipq806x-gmac-dwmac 37400000.ethernet eth1: IEEE 1588-2008 Advanced Timestamp supported
[ 5.575809] ipq806x-gmac-dwmac 37400000.ethernet eth1: registered PTP clock
[ 5.584763] ipq806x-gmac-dwmac 37400000.ethernet eth1: configuring for fixed/sgmii link mode
[ 5.586668] urandom_read: 2 callbacks suppressed
[ 5.586671] random: procd: uninitialized urandom read (4 bytes read)
[ 5.592703] ipq806x-gmac-dwmac 37400000.ethernet eth1: Link is Up - 1Gbps/Full - flow control off
[ 5.611278] IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
[ 9.845475] EXT4-fs (loop0): recovery complete
[ 9.846386] EXT4-fs (loop0): mounted filesystem with ordered data mode. Opts: (null)
[ 9.849155] mount_root: switching to ext4 overlay
[ 9.860908] urandom-seed: Seeding with /etc/urandom.seed
[ 9.904437] ipq806x-gmac-dwmac 37400000.ethernet eth1: Link is Down
[ 9.945774] procd: - early -
[ 9.945936] procd: - watchdog -
[ 10.504332] procd: - watchdog -
[ 10.504877] procd: - ubus -
[ 10.595507] random: ubusd: uninitialized urandom read (4 bytes read)
[ 10.596872] random: ubusd: uninitialized urandom read (4 bytes read)
[ 10.601346] random: ubusd: uninitialized urandom read (4 bytes read)
[ 10.608276] procd: - init -
[ 10.991209] urngd: v1.0.2 started.
[ 10.999399] kmodloader: loading kernel modules from /etc/modules.d/*
[ 11.015964] NET: Registered protocol family 38
[ 11.019633] NET: Registered protocol family 15
[ 11.020773] Initializing XFRM netlink socket
[ 11.024734] tun: Universal TUN/TAP device driver, 1.6
[ 11.025419] random: crng init done
[ 11.033093] random: 1 urandom warning(s) missed due to ratelimiting
[ 11.060173] gre: GRE over IPv4 demultiplexor driver
[ 11.060949] ip_gre: GRE over IPv4 tunneling driver
[ 11.066157] ip6_gre: GRE over IPv6 tunneling driver
[ 11.120601] Mirror/redirect action on
[ 11.126673] u32 classifier
[ 11.126687] input device check on
[ 11.128257] Actions configured
[ 11.148738] GACT probability on
[ 11.150875] Simple TC action Loaded
[ 11.191168] Bridge firewalling registered
[ 11.191603] Loading modules backported from Linux version v5.8-0-gbcf876870b95
[ 11.194148] Backport generated by backports.git v5.8-1-0-g79400d9e
[ 11.291386] nf_conntrack_rtsp v0.7 loading
[ 11.310793] nf_nat_rtsp v0.7 loading
[ 11.346455] wireguard: WireGuard 1.0.20201112 loaded. See www.wireguard.com for information.
[ 11.346479] wireguard: Copyright (C) 2015-2019 Jason A. Donenfeld Jason@zx2c4.com. All Rights Reserved.
[ 11.367787] IPsec XFRM device driver
[ 11.399988] xt_time: kernel timezone is -0000
[ 11.473038] PPP generic driver version 2.4.2
[ 11.474077] PPP MPPE Compression module registered
[ 11.477482] NET: Registered protocol family 24
[ 11.481937] PPTP driver version 0.8.5
[ 11.518339] ath10k_pci 0000:01:00.0: assign IRQ: got 35
[ 11.518358] ath10k 5.4 driver, optimized for CT firmware, probing pci device: 0x46.
[ 11.518416] ath10k_mac_create, priv_size: 868 hw: 9275bd48 hw->priv: 2f4fba23
[ 11.532801] ath10k_pci 0000:01:00.0: enabling device (0140 -> 0142)
[ 11.532883] ath10k_pci 0000:01:00.0: enabling bus mastering
[ 11.533407] ath10k_pci 0000:01:00.0: pci irq msi oper_irq_mode 2 irq_mode 0 reset_mode 0
[ 12.370373] ath10k_pci 0000:01:00.0: qca9984/qca9994 hw1.0 target 0x01000000 chip_id 0x00000000 sub 168c:cafe
[ 12.370402] ath10k_pci 0000:01:00.0: kconfig debug 0 debugfs 1 tracing 0 dfs 1 testmode 0
[ 12.380883] ath10k_pci 0000:01:00.0: firmware ver 10.4b-ct-9984-fW-13-795874169 api 5 features mfp,peer-flow-ctrl,txstatus-noack,wmi-10.x-CT,ratemask-CT,regdump-CT,txrate-CT,flush-all-CT,pingpong-CT,ch-regs-CT,nop-CT,set-special-CT,tx-rc-CT,cust-stats-CT,txrate2-CT,beacon-cb-CT,wmi-block-ack-CT,wmi-bcn-rc-CT crc32 f3d4b769
[ 14.708846] ath10k_pci 0000:01:00.0: board_file api 2 bmi_id 0:1 crc32 85498734
[ 20.523226] ath10k_pci 0000:01:00.0: unsupported HTC service id: 1536
[ 20.524708] ath10k_pci 0000:01:00.0: 10.4 wmi init: vdevs: 16 peers: 48 tid: 96
[ 20.528726] ath10k_pci 0000:01:00.0: msdu-desc: 2500 skid: 32
[ 20.610176] ath10k_pci 0000:01:00.0: wmi print 'P 48/48 V 16 K 144 PH 176 T 186 msdu-desc: 2500 sw-crypt: 0 ct-sta: 0'
[ 20.611013] ath10k_pci 0000:01:00.0: wmi print 'free: 84920 iram: 13316 sram: 11224'
[ 20.894482] ath10k_pci 0000:01:00.0: htt-ver 2.2 wmi-op 6 htt-op 4 cal pre-cal-file max-sta 32 raw 0 hwcrypto 1
[ 20.985927] ath: EEPROM regdomain sanitized
[ 20.985942] ath: EEPROM regdomain: 0x64
[ 20.985952] ath: EEPROM indicates we should expect a direct regpair map
[ 20.985976] ath: Country alpha2 being used: 00
[ 20.985986] ath: Regpair used: 0x64
[ 20.991089] ath10k_pci 0001:01:00.0: assign IRQ: got 37
[ 20.991115] ath10k 5.4 driver, optimized for CT firmware, probing pci device: 0x46.
[ 20.991193] ath10k_mac_create, priv_size: 868 hw: 05d4a2b1 hw->priv: 31891c8e
[ 20.998219] ath10k_pci 0001:01:00.0: enabling device (0140 -> 0142)
[ 21.004929] ath10k_pci 0001:01:00.0: enabling bus mastering
[ 21.005496] ath10k_pci 0001:01:00.0: pci irq msi oper_irq_mode 2 irq_mode 0 reset_mode 0
[ 21.547634] ath10k_pci 0001:01:00.0: qca9984/qca9994 hw1.0 target 0x01000000 chip_id 0x00000000 sub 168c:cafe
[ 21.547666] ath10k_pci 0001:01:00.0: kconfig debug 0 debugfs 1 tracing 0 dfs 1 testmode 0
[ 21.558665] ath10k_pci 0001:01:00.0: firmware ver 10.4b-ct-9984-fW-13-795874169 api 5 features mfp,peer-flow-ctrl,txstatus-noack,wmi-10.x-CT,ratemask-CT,regdump-CT,txrate-CT,flush-all-CT,pingpong-CT,ch-regs-CT,nop-CT,set-special-CT,tx-rc-CT,cust-stats-CT,txrate2-CT,beacon-cb-CT,wmi-block-ack-CT,wmi-bcn-rc-CT crc32 f3d4b769
[ 23.888521] ath10k_pci 0001:01:00.0: board_file api 2 bmi_id 0:2 crc32 85498734
[ 29.727949] ath10k_pci 0001:01:00.0: unsupported HTC service id: 1536
[ 29.728592] ath10k_pci 0001:01:00.0: 10.4 wmi init: vdevs: 16 peers: 48 tid: 96
[ 29.733364] ath10k_pci 0001:01:00.0: msdu-desc: 2500 skid: 32
[ 29.817058] ath10k_pci 0001:01:00.0: wmi print 'P 48/48 V 16 K 144 PH 176 T 186 msdu-desc: 2500 sw-crypt: 0 ct-sta: 0'
[ 29.817899] ath10k_pci 0001:01:00.0: wmi print 'free: 84920 iram: 13316 sram: 11224'
[ 30.260276] ath10k_pci 0001:01:00.0: htt-ver 2.2 wmi-op 6 htt-op 4 cal pre-cal-file max-sta 32 raw 0 hwcrypto 1
[ 30.355134] ath: EEPROM regdomain sanitized
[ 30.355149] ath: EEPROM regdomain: 0x64
[ 30.355159] ath: EEPROM indicates we should expect a direct regpair map
[ 30.355182] ath: Country alpha2 being used: 00
[ 30.355192] ath: Regpair used: 0x64
[ 30.365627] kmodloader: done loading kernel modules from /etc/modules.d/*
[ 34.870519] dwmac1000: Master AXI performs any burst length
[ 34.870547] ipq806x-gmac-dwmac 37400000.ethernet eth1: No Safety Features support found
[ 34.874900] ipq806x-gmac-dwmac 37400000.ethernet eth1: IEEE 1588-2008 Advanced Timestamp supported
[ 34.883090] ipq806x-gmac-dwmac 37400000.ethernet eth1: registered PTP clock
[ 34.892002] ipq806x-gmac-dwmac 37400000.ethernet eth1: configuring for fixed/sgmii link mode
[ 34.898974] ipq806x-gmac-dwmac 37400000.ethernet eth1: Link is Up - 1Gbps/Full - flow control off
[ 34.905798] br-lan: port 1(eth1.1) entered blocking state
[ 34.916227] br-lan: port 1(eth1.1) entered disabled state
[ 34.921939] device eth1.1 entered promiscuous mode
[ 34.927043] device eth1 entered promiscuous mode
[ 34.934692] br-lan: port 1(eth1.1) entered blocking state
[ 34.936439] br-lan: port 1(eth1.1) entered forwarding state
[ 41.497983] ath10k_pci 0000:01:00.0: unsupported HTC service id: 1536
[ 41.498205] ath10k_pci 0000:01:00.0: 10.4 wmi init: vdevs: 16 peers: 48 tid: 96
[ 41.503397] ath10k_pci 0000:01:00.0: msdu-desc: 2500 skid: 32
[ 41.584993] ath10k_pci 0000:01:00.0: wmi print 'P 48/48 V 16 K 144 PH 176 T 186 msdu-desc: 2500 sw-crypt: 0 ct-sta: 0'
[ 41.585841] ath10k_pci 0000:01:00.0: wmi print 'free: 84920 iram: 13316 sram: 11224'
[ 41.963081] ath10k_pci 0000:01:00.0: Firmware lacks feature flag indicating a retry limit of > 2 is OK, requested limit: 4
[ 41.967364] IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
[ 41.974008] IPv6: ADDRCONF(NETDEV_CHANGE): br-lan: link becomes ready
[ 41.987847] br-lan: port 2(wlan0) entered blocking state
[ 41.987869] br-lan: port 2(wlan0) entered disabled state
[ 41.992465] device wlan0 entered promiscuous mode
[ 42.158445] ath10k_pci 0000:01:00.0: NOTE: Firmware DBGLOG output disabled in debug_mask: 0x10000000
[ 47.938514] ath10k_pci 0001:01:00.0: unsupported HTC service id: 1536
[ 47.939207] ath10k_pci 0001:01:00.0: 10.4 wmi init: vdevs: 16 peers: 48 tid: 96
[ 47.943927] ath10k_pci 0001:01:00.0: msdu-desc: 2500 skid: 32
[ 48.027595] ath10k_pci 0001:01:00.0: wmi print 'P 48/48 V 16 K 144 PH 176 T 186 msdu-desc: 2500 sw-crypt: 0 ct-sta: 0'
[ 48.028480] ath10k_pci 0001:01:00.0: wmi print 'free: 84920 iram: 13316 sram: 11224'
[ 48.642253] ath10k_pci 0001:01:00.0: Firmware lacks feature flag indicating a retry limit of > 2 is OK, requested limit: 4
[ 48.665281] br-lan: port 3(wlan1) entered blocking state
[ 48.665304] br-lan: port 3(wlan1) entered disabled state
[ 48.669905] device wlan1 entered promiscuous mode
[ 51.876753] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 51.876889] br-lan: port 2(wlan0) entered blocking state
[ 51.882167] br-lan: port 2(wlan0) entered forwarding state
[ 59.428462] IPv6: ADDRCONF(NETDEV_CHANGE): wlan1: link becomes ready
[ 59.428847] br-lan: port 3(wlan1) entered blocking state
[ 59.433926] br-lan: port 3(wlan1) entered forwarding state
[ 117.396165] ath10k_pci 0001:01:00.0: wmi: fixing invalid VHT TX rate code 0xff

@openwrt-bot
Copy link
Author

amezin:

For me this is caused by commit a0be585 (November 12th). Are you sure it didn't work in November 10th snapshot?

Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment
Labels
Projects
None yet
Development

No branches or pull requests

1 participant