FS#3445 - arp-scan not working in 19.07.4 #8316
Labels
core packages
pull request/issue for core (in-tree) packages
flyspray
release/19.07
pull request/issue targeted (also) for OpenWrt 19.07 release
ayrstone:
Upgrading OpenWRT from 18.06 to 19.07 on a couple of Alfa wireless devices (N2Q and Tube2H) and on Ubiquiti PicoStation M2, observed the following behavior in arp-scan:
Before upgrade (in 18.06):
arp-scan -I br-lan -l
Interface: br-lan, datalink type: EN10MB (Ethernet)
WARNING: Cannot open MAC/Vendor file /usr/share/arp-scan/ieee-oui.txt: No such file or directory
WARNING: Cannot open MAC/Vendor file /usr/share/arp-scan/ieee-iab.txt: No such file or directory
WARNING: Cannot open MAC/Vendor file /usr/share/arp-scan/mac-vendor.txt: No such file or directory
Starting arp-scan 1.9.5 with 256 hosts (https://github.com/royhills/arp-scan)
172.22.47.1 de:9f:db:05:46:5d (Unknown)
172.22.47.53 00:24:8c:9d:1d:92 (Unknown)
172.22.47.77 0c:ef:af:c4:f5:b5 (Unknown)
172.22.47.111 3c:2a:f4:b8:25:c2 (Unknown)
172.22.47.116 00:02:d1:43:e8:5b (Unknown)
172.22.47.102 5c:e0:c5:67:1a:e2 (Unknown)
172.22.47.186 00:c0:ca:8d:4d:2c (Unknown)
172.22.47.108 00:40:8c:a5:e8:03 (Unknown)
172.22.47.130 00:40:8c:be:b0:73 (Unknown)
172.22.47.161 d8:c4:97:e0:30:d1 (Unknown)
172.22.47.108 00:40:8c:a5:e8:03 (Unknown) (DUP: 2)
172.22.47.130 00:40:8c:be:b0:73 (Unknown) (DUP: 2)
172.22.47.132 2c:aa:8e:9a:3a:94 (Unknown) (DUP: 1)
172.22.47.161 d8:c4:97:e0:30:d1 (Unknown) (DUP: 2)
14 packets received by filter, 0 packets dropped by kernel
Ending arp-scan 1.9.5: 256 hosts scanned in 1.804 seconds (141.91 hosts/sec). 14 responded
After upgrade (in 19.07):
arp-scan -I br-lan -l
Interface: br-lan, datalink type: EN10MB (Ethernet)
WARNING: Cannot open MAC/Vendor file /usr/share/arp-scan/ieee-oui.txt: No such file or directory
WARNING: Cannot open MAC/Vendor file /usr/share/arp-scan/ieee-iab.txt: No such file or directory
WARNING: Cannot open MAC/Vendor file /usr/share/arp-scan/mac-vendor.txt: No such file or directory
Starting arp-scan 1.9.5 with 256 hosts (https://github.com/royhills/arp-scan)
20 packets received by filter, 0 packets dropped by kernel
Ending arp-scan 1.9.5: 256 hosts scanned in 1.823 seconds (140.43 hosts/sec). 0 responded
Note that, while arp-scan has not changed version, libpcap1 has rev'ed from libpcap1 - 1.9.0-2 to libpcap1 - 1.9.1-2.1
To reproduce:
Connect a device running one of the 18.06 releases (I'm specifically using r9137-0465e41) and run arp-scan on an active network. Then connect a device running 19.07.4 and run arp-scan on the same network.
The text was updated successfully, but these errors were encountered: