- Status Unconfirmed
- Percent Complete
- Task Type Bug Report
- Category Base system
- Assigned To No-one
- Operating System All
- Severity Low
- Priority Very Low
- Reported Version Trunk
- Due in Version Undecided
-
Due Date
Undecided
- Private
FS#3437 - WiTi Board flash size
Supply the following if possible:
- Device problem occurs on WiTi Board 512MB
- Software versions of OpenWrt/LEDE release, packages, etc. All release versions
- Steps to reproduce = None
Witi Board 512MB version has a flash size of 32mb, there maybe some 512mb versions with 16mb flash but the 2 i have are both 32mb spi flash. Can someone add this to source? At the moment i have to edit the .dtsi file and mt7621.mk file to reflect the correct image and flash size.
WITI.dtsi
from
partition@50000 {
compatible = "denx,uimage";
label = "firmware";
reg = <0x50000 0xfb0000>;
to
partition@50000 {
compatible = "denx,uimage";
label = "firmware";
reg = <0x50000 0x1fb0000>;
mt7621.mk
From
define Device/mqmaker_witi-512m DTS := WITI-512M IMAGE_SIZE := $(ralink_default_fw_size_16M) DEVICE_TITLE := MQmaker WiTi (512MB RAM) DEVICE_PACKAGES := \ kmod-ata-core kmod-ata-ahci kmod-mt76x2 kmod-sdhci-mt7620 kmod-usb3 \ kmod-usb-ledtrig-usbport wpad-basic endef TARGET_DEVICES += mqmaker_witi-512m
To
define Device/mqmaker_witi-512m DTS := WITI-512M IMAGE_SIZE := $(ralink_default_fw_size_32M) DEVICE_TITLE := MQmaker WiTi (512MB RAM) DEVICE_PACKAGES := \ kmod-ata-core kmod-ata-ahci kmod-mt76x2 kmod-sdhci-mt7620 kmod-usb3 \ kmod-usb-ledtrig-usbport wpad-basic endef TARGET_DEVICES += mqmaker_witi-512m
Thank you
All evidence I found online was to the contrary, telling this device has 16 MiB flash. Apart from that, note that flashing an 16m image to a 32m device won't hurt, but vice-versa might brick your device.