New issue
Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.
By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.
Already on GitHub? Sign in to your account
FS#3382 - mikrotik: rb-nor-flash-16M-ac-initramfs-kernel.bin doesn't actually contain ath10k drivers/firmwares #8315
Comments
l29ah: Okay, i needed to install ath10k-firmware-qca988x and kmod-ath10k. |
l29ah: Nah, it only brings up b/g mode and whines in the log about other missing blobs: |
l29ah: rb-nor-flash-16M-ac-initramfs-kernel.bin and rb-nor-flash-16M-initramfs-kernel.bin are identical, this doesn't look right |
l29ah: Yeah, the sysupgrade image works correctly. |
l29ah:
Booting openwrt-19.07.4-ar71xx-mikrotik-rb-nor-flash-16M-ac-initramfs-kernel.bin via tftp. Relevant dmesg chunk at driver load demonstrating that only 2.4GHz interface is detected:
Tue Sep 8 07:29:00 2020 kern.debug kernel: [ 10.257636] ath: EEPROM regdomain: 0x0
Tue Sep 8 07:29:00 2020 kern.debug kernel: [ 10.257643] ath: EEPROM indicates default country code should be used
Tue Sep 8 07:29:00 2020 kern.debug kernel: [ 10.257646] ath: doing EEPROM country->regdmn map search
Tue Sep 8 07:29:00 2020 kern.debug kernel: [ 10.257659] ath: country maps to regdmn code: 0x3a
Tue Sep 8 07:29:00 2020 kern.debug kernel: [ 10.257663] ath: Country alpha2 being used: US
Tue Sep 8 07:29:00 2020 kern.debug kernel: [ 10.257666] ath: Regpair used: 0x3a
Tue Sep 8 07:29:00 2020 kern.debug kernel: [ 10.274863] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
Tue Sep 8 07:29:00 2020 kern.info kernel: [ 10.276460] ieee80211 phy0: Atheros AR9550 Rev:0 mem=0xb8100000, irq=47
The text was updated successfully, but these errors were encountered: