OpenWrt/LEDE Project

  • Status Unconfirmed
  • Percent Complete
    0%
  • Task Type Bug Report
  • Category Base system
  • Assigned To No-one
  • Operating System All
  • Severity High
  • Priority Very Low
  • Reported Version Trunk
  • Due in Version Undecided
  • Due Date Undecided
  • Private
Attached to Project: OpenWrt/LEDE Project
Opened by Ahmar Aftab - 24.08.2020

FS#3303 - ntfs drive not mounting

Supply the following if possible:
- Device problem occurs on
- Software versions of OpenWrt/LEDE release, packages, etc.
- Steps to reproduce

 

This problem is occurring on a BT HomeHub 5A. I have two of these and the problem happens on both of them. I am currently using V5.X and the issue is only here but it is working in v19.07.3.

The issue is that I am not able to auto-mount my NTFS drive with bootup through fstab.
The error is as follows:

Sun Aug 23 21:56:03 2020 kern.notice kernel: [   11.711119] scsi 0:0:0:0: Direct-Access     Seagate  Expansion        0608 PQ: 0 ANSI: 6
Sun Aug 23 21:56:03 2020 kern.notice kernel: [   11.725022] sd 0:0:0:0: [sda] 976773167 512-byte logical blocks: (500 GB/466 GiB)
Sun Aug 23 21:56:03 2020 kern.notice kernel: [   11.733044] sd 0:0:0:0: [sda] Write Protect is off
Sun Aug 23 21:56:03 2020 kern.debug kernel: [   11.736665] sd 0:0:0:0: [sda] Mode Sense: 4f 00 00 00
Sun Aug 23 21:56:03 2020 kern.notice kernel: [   11.738710] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Sun Aug 23 21:56:03 2020 kern.warn kernel: [   11.739527] overlayfs: upper fs does not support xattr, falling back to index=off and metacopy=off.
Sun Aug 23 21:56:03 2020 kern.info kernel: [   12.012011]  sda: sda1
Sun Aug 23 21:56:03 2020 kern.notice kernel: [   12.020464] sd 0:0:0:0: [sda] Attached SCSI disk

Sun Aug 23 21:56:10 2020 daemon.err block: No "mount.ntfs" utility available
Sun Aug 23 21:56:10 2020 daemon.err block: mounting /dev/sda1 (ntfs) as /tmp/data-hdd failed (25) - Not a tty

Although I can mount the drive manually through ntfs-3g and the package is already installed but somehow the system thinks it is not available. For now the workaround is to manually mount the drive when the boot ends.

Please fix this issue thanks.

Loading...

Available keyboard shortcuts

Tasklist

Task Details

Task Editing