Skip to content
New issue

Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.

By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.

Already on GitHub? Sign in to your account

FS#3271 - WAN-eth1 restarts constantly and stops completely after a while. #6415

Open
openwrt-bot opened this issue Aug 4, 2020 · 1 comment
Labels

Comments

@openwrt-bot
Copy link

francocastillo:

I have a TP-link Archer C60 v1 that has a serious problem of constant disconnections every few minutes (approx 4 to 1 hour). It seems to be random, or something I'm not seeing.

[[https://deviwiki.com/wiki/TP-LINK_Archer_C60_v1.x|Device info]].

Report in the OpenWrt forum [[https://forum.openwrt.org/t/archer-c60-wan-disconnects/68896|here]] and [[https://forum.openwrt.org/t/udhcpc-does-not-work-correctly/69774/1|here]].

The problem happens with official or own compilations.

root@archer_c60:~# dmesg
[ 0.000000] Linux version 5.4.52 (franco@ubuntu) (gcc version 8.4.0 (OpenWrt GCC 8.4.0 r14025-009e62c92c)) #0 Mon Aug 3 21:34:34 2020
[ 0.000000] printk: bootconsole [early0] enabled
[ 0.000000] CPU0 revision is: 00019750 (MIPS 74Kc)
[ 0.000000] MIPS: machine is TP-Link Archer C60 v1
[ 0.000000] SoC: Qualcomm Atheros QCA956X ver 1 rev 0
[ 0.000000] Initrd not found or empty - disabling initrd
[ 0.000000] Primary instruction cache 64kB, VIPT, 4-way, linesize 32 bytes.
[ 0.000000] Primary data cache 32kB, 4-way, VIPT, cache aliases, linesize 32 bytes
[ 0.000000] Zone ranges:
[ 0.000000] Normal [mem 0x0000000000000000-0x0000000003ffffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000000000-0x0000000003ffffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x0000000003ffffff]
[ 0.000000] On node 0 totalpages: 16384
[ 0.000000] Normal zone: 144 pages used for memmap
[ 0.000000] Normal zone: 0 pages reserved
[ 0.000000] Normal zone: 16384 pages, LIFO batch:3
[ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=132768
[ 0.000000] pcpu-alloc: [0] 0
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 16240
[ 0.000000] Kernel command line: console=ttyS0,115200n8 rootfstype=squashfs,jffs2
[ 0.000000] Dentry cache hash table entries: 8192 (order: 3, 32768 bytes, linear)
[ 0.000000] Inode-cache hash table entries: 4096 (order: 2, 16384 bytes, linear)
[ 0.000000] Writing ErrCtl register=00000000
[ 0.000000] Readback ErrCtl register=00000000
[ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
[ 0.000000] Memory: 57348K/65536K available (4786K kernel code, 186K rwdata, 1112K rodata, 1204K init, 196K bss, 8188K reserved, 0K cma-reserved)
[ 0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[ 0.000000] NR_IRQS: 51
[ 0.000000] random: get_random_bytes called from start_kernel+0x32c/0x518 with crng_init=0
[ 0.000000] CPU clock: 775.000 MHz
[ 0.000000] clocksource: MIPS: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 4932285024 ns
[ 0.000006] sched_clock: 32 bits at 387MHz, resolution 2ns, wraps every 5541893118ns
[ 0.008216] Calibrating delay loop... 385.02 BogoMIPS (lpj=770048)
[ 0.046713] pid_max: default: 32768 minimum: 301
[ 0.051703] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linear)
[ 0.059420] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear)
[ 0.071423] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[ 0.081738] futex hash table entries: 256 (order: -1, 3072 bytes, linear)
[ 0.089029] pinctrl core: initialized pinctrl subsystem
[ 0.095494] NET: Registered protocol family 16
[ 0.129728] clocksource: Switched to clocksource MIPS
[ 0.136186] NET: Registered protocol family 2
[ 0.141534] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 4096 bytes, linear)
[ 0.150415] TCP established hash table entries: 1024 (order: 0, 4096 bytes, linear)
[ 0.158508] TCP bind hash table entries: 1024 (order: 0, 4096 bytes, linear)
[ 0.165952] TCP: Hash tables configured (established 1024 bind 1024)
[ 0.172784] UDP hash table entries: 256 (order: 0, 4096 bytes, linear)
[ 0.179723] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes, linear)
[ 0.187384] NET: Registered protocol family 1
[ 0.192033] PCI: CLS 0 bytes, default 32
[ 0.199601] workingset: timestamp_bits=14 max_order=14 bucket_order=0
[ 0.212506] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 0.218699] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
[ 0.242820] pinctrl-single 1804002c.pinmux: 544 pins, size 68
[ 0.249924] Serial: 8250/16550 driver, 1 ports, IRQ sharing disabled
[ 0.257292] printk: console [ttyS0] disabled
[ 0.261885] 18020000.uart: ttyS0 at MMIO 0x18020000 (irq = 9, base_baud = 1562500) is a 16550A
[ 0.270991] printk: console [ttyS0] enabled
[ 0.280058] printk: bootconsole [early0] disabled
[ 0.299004] spi-nor spi0.0: gd25q64 (8192 Kbytes)
[ 0.303934] 5 fixed-partitions partitions found on MTD device spi0.0
[ 0.310502] Creating 5 MTD partitions on "spi0.0":
[ 0.315464] 0x000000000000-0x000000010000 : "u-boot"
[ 0.321473] 0x000000010000-0x000000020000 : "mac"
[ 0.327179] 0x000000020000-0x0000007e0000 : "firmware"
[ 0.336503] 2 uimage-fw partitions found on MTD device firmware
[ 0.342670] Creating 2 MTD partitions on "firmware":
[ 0.347820] 0x000000000000-0x0000001e8769 : "kernel"
[ 0.353783] 0x0000001e8769-0x0000007c0000 : "rootfs"
[ 0.359694] mtd: device 4 (rootfs) set to be root filesystem
[ 0.367266] 1 squashfs-split partitions found on MTD device rootfs
[ 0.373704] 0x000000720000-0x0000007c0000 : "rootfs_data"
[ 0.380120] 0x0000007e0000-0x0000007f0000 : "tplink"
[ 0.386169] 0x0000007f0000-0x000000800000 : "art"
[ 0.393638] libphy: Fixed MDIO Bus: probed
[ 0.730817] ag71xx 19000000.eth: Could not connect to PHY device. Deferring probe.
[ 1.133724] random: fast init done
[ 1.370090] libphy: ag71xx_mdio: probed
[ 1.374808] libphy: ar8xxx-mdio: probed
[ 1.383022] switch0: Atheros AR8229 rev. 1 switch registered on mdio.0
[ 1.443277] ag71xx 1a000000.eth: connected to PHY at fixed-0:00 [uid=00000000, driver=Generic PHY]
[ 1.453133] eth0: Atheros AG71xx at 0xba000000, irq 5, mode: gmii
[ 1.459652] i2c /dev entries driver
[ 1.465629] NET: Registered protocol family 10
[ 1.475565] Segment Routing with IPv6
[ 1.479506] NET: Registered protocol family 17
[ 1.484184] 8021q: 802.1Q VLAN Support v1.8
[ 1.489239] PCI host bridge /ahb/pcie-controller@18250000 ranges:
[ 1.495606] MEM 0x0000000012000000..0x0000000013ffffff
[ 1.501011] IO 0x0000000000000000..0x0000000000000000
[ 1.506568] PCI host bridge to bus 0000:00
[ 1.510837] pci_bus 0000:00: root bus resource [mem 0x12000000-0x13ffffff]
[ 1.517948] pci_bus 0000:00: root bus resource [io 0x0000]
[ 1.523714] pci_bus 0000:00: root bus resource [??? 0x00000000 flags 0x0]
[ 1.530731] pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff]
[ 1.538945] pci 0000:00:00.0: [168c:0056] type 00 class 0x028000
[ 1.545205] pci 0000:00:00.0: reg 0x10: [mem 0x00000000-0x001fffff 64bit]
[ 1.552347] pci 0000:00:00.0: PME# supported from D0 D3hot
[ 1.558929] pci_bus 0000:00: busn_res: [bus 00-ff] end is updated to 00
[ 1.565815] pci 0000:00:00.0: BAR 0: assigned [mem 0x12000000-0x121fffff 64bit]
[ 1.893261] ag71xx 19000000.eth: connected to PHY at mdio.0:1f:04 [uid=004dd042, driver=Generic PHY]
[ 1.903527] eth1: Atheros AG71xx at 0xb9000000, irq 4, mode: mii
[ 1.916678] VFS: Mounted root (squashfs filesystem) readonly on device 31:4.
[ 1.930630] Freeing unused kernel memory: 1204K
[ 1.935329] This architecture does not have kernel memory protection.
[ 1.941979] Run /sbin/init as init process
[ 2.603251] init: Console is alive
[ 2.607070] init: - watchdog -
[ 3.857698] kmodloader: loading kernel modules from /etc/modules-boot.d/

[ 3.901414] kmodloader: done loading kernel modules from /etc/modules-boot.d/*
[ 3.919321] init: - preinit -
[ 4.761647] random: jshn: uninitialized urandom read (4 bytes read)
[ 4.866893] random: jshn: uninitialized urandom read (4 bytes read)
[ 5.008869] random: jshn: uninitialized urandom read (4 bytes read)
[ 5.761280] eth0: link up (1000Mbps/Full duplex)
[ 5.769806] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 5.781838] IPv6: ADDRCONF(NETDEV_CHANGE): eth0.1: link becomes ready
[ 5.821133] urandom_read: 4 callbacks suppressed
[ 5.821140] random: procd: uninitialized urandom read (4 bytes read)
[ 10.086330] jffs2: notice: (527) jffs2_build_xattr_subsystem: complete building xattr subsystem, 21 of xdatum (9 unchecked, 1 orphan) and 32 of xref (1 dead, 0 orphan) found.
[ 10.104253] mount_root: switching to jffs2 overlay
[ 10.139301] overlayfs: upper fs does not support tmpfile.
[ 10.151067] urandom-seed: Seeding with /etc/urandom.seed
[ 10.238894] eth0: link down
[ 10.259802] procd: - early -
[ 10.262927] procd: - watchdog -
[ 10.866830] procd: - watchdog -
[ 10.870377] procd: - ubus -
[ 10.915048] random: ubusd: uninitialized urandom read (4 bytes read)
[ 10.924763] random: ubusd: uninitialized urandom read (4 bytes read)
[ 10.932683] procd: - init -
[ 11.661864] kmodloader: loading kernel modules from /etc/modules.d/*
[ 11.758839] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
[ 11.875205] Mirror/redirect action on
[ 11.900395] u32 classifier
[ 11.903248] input device check on
[ 11.907032] Actions configured
[ 11.942370] Loading modules backported from Linux version v5.8-rc2-0-g48778464bb7d
[ 11.950239] Backport generated by backports.git v5.8-rc2-1-0-g7a69429b
[ 12.015183] wireguard: WireGuard 1.0.20200729 loaded. See www.wireguard.com for information.
[ 12.023954] wireguard: Copyright (C) 2015-2019 Jason A. Donenfeld Jason@zx2c4.com. All Rights Reserved.
[ 12.125541] urngd: v1.0.2 started.
[ 12.154690] xt_time: kernel timezone is -0000
[ 12.432978] ath10k 5.4 driver, optimized for CT firmware, probing pci device: 0x56.
[ 12.441047] ath10k_mac_create, priv_size: 804 hw: (ptrval) hw->priv: (ptrval)
[ 12.454450] random: crng init done
[ 12.470492] ath10k_pci 0000:00:00.0: enabling device (0000 -> 0002)
[ 12.477291] ath10k_pci 0000:00:00.0: pci irq legacy oper_irq_mode 1 irq_mode 0 reset_mode 0
[ 14.858841] ath10k_pci 0000:00:00.0: qca9888 hw2.0 target 0x01000000 chip_id 0x00000000 sub 0000:0000
[ 14.868416] ath10k_pci 0000:00:00.0: kconfig debug 0 debugfs 1 tracing 0 dfs 1 testmode 0
[ 14.888430] ath10k_pci 0000:00:00.0: firmware ver 10.4b-ct-9888-fW-013-d81f62d97 api 5 features mfp,peer-flow-ctrl,txstatus-noack,wmi-10.x-CT,ratemask-CT,regdump-CT,txrate-CT,flush-all-CT,pingpong-CT,ch-regs-CT,nop-CT,set-special-CT,tx-rc-CT,cust-stats-CT,txrate2-CT,beacon-cb-CT,wmi-block-ack-CT,wmi-bcn-rc-CT crc32 937128b4
[ 15.223010] ath10k_pci 0000:00:00.0: failed to fetch board data for bus=pci,bmi-chip-id=0,bmi-board-id=20 from ath10k/QCA9888/hw2.0/board-2.bin
[ 15.237129] ath10k_pci 0000:00:00.0: board_file api 1 bmi_id 0:20 crc32 8971a1b4
[ 17.273475] ath10k_pci 0000:00:00.0: unsupported HTC service id: 1536
[ 17.283350] ath10k_pci 0000:00:00.0: 10.4 wmi init: vdevs: 16 peers: 48 tid: 96
[ 17.291138] ath10k_pci 0000:00:00.0: msdu-desc: 2500 skid: 32
[ 17.321246] ath10k_pci 0000:00:00.0: wmi print 'P 48/48 V 16 K 144 PH 176 T 186 msdu-desc: 2500 sw-crypt: 0 ct-sta: 0'
[ 17.332536] ath10k_pci 0000:00:00.0: wmi print 'free: 114524 iram: 12628 sram: 29508'
[ 17.566737] ath10k_pci 0000:00:00.0: htt-ver 2.2 wmi-op 6 htt-op 4 cal pre-cal-file max-sta 32 raw 0 hwcrypto 1
[ 17.648824] ath: EEPROM regdomain sanitized
[ 17.648834] ath: EEPROM regdomain: 0x64
[ 17.648837] ath: EEPROM indicates we should expect a direct regpair map
[ 17.648854] ath: Country alpha2 being used: 00
[ 17.648857] ath: Regpair used: 0x64
[ 17.732561] ath: EEPROM regdomain sanitized
[ 17.732571] ath: EEPROM regdomain: 0x64
[ 17.732574] ath: EEPROM indicates we should expect a direct regpair map
[ 17.732593] ath: Country alpha2 being used: 00
[ 17.732596] ath: Regpair used: 0x64
[ 17.744788] ieee80211 phy1: Selected rate control algorithm 'minstrel_ht'
[ 17.746726] ieee80211 phy1: Atheros AR9561 Rev:0 mem=0xb8100000, irq=2
[ 17.784311] kmodloader: done loading kernel modules from /etc/modules.d/*
[ 29.726074] eth0: link up (1000Mbps/Full duplex)
[ 29.744030] br-lan: port 1(eth0.1) entered blocking state
[ 29.749664] br-lan: port 1(eth0.1) entered disabled state
[ 29.755551] device eth0.1 entered promiscuous mode
[ 29.760547] device eth0 entered promiscuous mode
[ 29.773858] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 29.845863] br-lan: port 1(eth0.1) entered blocking state
[ 29.851467] br-lan: port 1(eth0.1) entered forwarding state
[ 30.753814] IPv6: ADDRCONF(NETDEV_CHANGE): br-lan: link becomes ready
[ 32.003594] eth1: link up (100Mbps/Full duplex)
[ 32.028748] IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
[ 32.790926] ath: EEPROM regdomain: 0x8020
[ 32.795121] ath: EEPROM indicates we should expect a country code
[ 32.801425] ath: doing EEPROM country->regdmn map search
[ 32.806913] ath: country maps to regdmn code: 0x3b
[ 32.811867] ath: Country alpha2 being used: AR
[ 32.816462] ath: Regpair used: 0x3b
[ 32.820066] ath: regdomain 0x8020 dynamically updated by user
[ 32.826071] ath: EEPROM regdomain: 0x8020
[ 32.830223] ath: EEPROM indicates we should expect a country code
[ 32.836514] ath: doing EEPROM country->regdmn map search
[ 32.841998] ath: country maps to regdmn code: 0x3b
[ 32.846944] ath: Country alpha2 being used: AR
[ 32.851530] ath: Regpair used: 0x3b
[ 32.855135] ath: regdomain 0x8020 dynamically updated by user
[ 35.621539] br-lan: port 2(2G_ap) entered blocking state
[ 35.627088] br-lan: port 2(2G_ap) entered disabled state
[ 35.632889] device 2G_ap entered promiscuous mode
[ 36.767071] IPv6: ADDRCONF(NETDEV_CHANGE): 2G_ap: link becomes ready
[ 36.773915] br-lan: port 2(2G_ap) entered blocking state
[ 36.779457] br-lan: port 2(2G_ap) entered forwarding state
[ 39.593566] ath10k_pci 0000:00:00.0: unsupported HTC service id: 1536
[ 39.600391] ath10k_pci 0000:00:00.0: 10.4 wmi init: vdevs: 16 peers: 48 tid: 96
[ 39.608239] ath10k_pci 0000:00:00.0: msdu-desc: 2500 skid: 32
[ 39.638423] ath10k_pci 0000:00:00.0: wmi print 'P 48/48 V 16 K 144 PH 176 T 186 msdu-desc: 2500 sw-crypt: 0 ct-sta: 0'
[ 39.649793] ath10k_pci 0000:00:00.0: wmi print 'free: 114524 iram: 12628 sram: 29508'
[ 39.962495] ath10k_pci 0000:00:00.0: Firmware lacks feature flag indicating a retry limit of > 2 is OK, requested limit: 4
[ 40.056094] br-lan: port 3(5G_ap) entered blocking state
[ 40.061668] br-lan: port 3(5G_ap) entered disabled state
[ 40.067470] device 5G_ap entered promiscuous mode
[ 40.592976] ath10k_pci 0000:00:00.0: NOTE: Firmware DBGLOG output disabled in debug_mask: 0x10000000
[ 42.454916] IPv6: ADDRCONF(NETDEV_CHANGE): 5G_ap: link becomes ready
[ 42.461871] br-lan: port 3(5G_ap) entered blocking state
[ 42.467408] br-lan: port 3(5G_ap) entered forwarding state
[ 71.382406] ath10k_pci 0000:00:00.0: Invalid VHT mcs 15 peer stats
[ 341.666028] eth1: link down
[ 344.483336] eth1: link up (100Mbps/Full duplex)
[ 344.491658] IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
[ 578.229353] ath10k_pci 0000:00:00.0: htt tx: fixing invalid VHT TX rate code 0xff
[ 592.368021] eth1: link down
[ 594.703887] eth1: link up (100Mbps/Full duplex)
[ 594.714352] IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
[ 731.949888] eth1: link down
[ 734.221962] eth1: link up (100Mbps/Full duplex)
[ 734.227213] IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
[ 820.236857] eth1: link down
[ 822.605965] eth1: link up (100Mbps/Full duplex)
[ 822.610905] IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
[ 826.702190] eth1: link down
[ 829.102014] eth1: link up (100Mbps/Full duplex)
[ 829.107387] IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
[ 1649.347796] eth1: link down
[ 1651.621462] eth1: link up (100Mbps/Full duplex)
[ 1651.626465] IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
[ 1841.056988] eth1: link down
[ 1843.456817] eth1: link up (100Mbps/Full duplex)
[ 1843.461740] IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
[ 2180.413149] eth1: link down
[ 2182.718570] eth1: link up (100Mbps/Full duplex)
[ 2182.724457] IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
[ 2198.078586] eth1: link down
[ 2200.350082] eth1: link up (100Mbps/Full duplex)
[ 2200.355326] IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
[ 2767.640586] eth1: link down
[ 2769.913486] eth1: link up (100Mbps/Full duplex)
[ 2769.918880] IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
[ 3632.176061] eth1: link down
[ 3634.929548] eth1: link up (100Mbps/Full duplex)
[ 3634.947194] IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
[ 4204.358095] eth1: link down
[ 4206.821967] eth1: link up (100Mbps/Full duplex)
[ 4206.826885] IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
[ 4285.669868] eth1: link down
[ 4288.549039] eth1: link up (100Mbps/Full duplex)
[ 4288.553962] IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
[ 4437.028463] eth1: link down
[ 4439.299787] eth1: link up (100Mbps/Full duplex)
[ 4439.305020] IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
[ 5146.874710] eth1: link down
[ 5149.368670] eth1: link up (100Mbps/Full duplex)
[ 5149.374116] IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
[ 5381.813951] eth1: link down
[ 5384.055038] eth1: link up (100Mbps/Full duplex)
[ 5384.059934] IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
[ 5642.100393] eth1: link down
[ 5644.373038] eth1: link up (100Mbps/Full duplex)
[ 5644.378482] IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
[ 7494.721193] eth1: link down
[ 7497.344721] eth1: link up (100Mbps/Full duplex)
[ 7497.349853] IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
[ 7498.367589] eth1: link down
[ 7501.023786] eth1: link up (100Mbps/Full duplex)
[ 7501.033810] IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
[ 7768.284460] eth1: link down
[ 7770.555910] eth1: link up (100Mbps/Full duplex)
[ 7770.560802] IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
[ 8019.384339] eth1: link down
[ 8021.625385] eth1: link up (100Mbps/Full duplex)
[ 8021.630736] IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
[ 8403.572058] eth1: link down
[ 8405.813090] eth1: link up (100Mbps/Full duplex)
[ 8405.818007] IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
[ 8527.667165] eth1: link down
[ 8529.907650] eth1: link up (100Mbps/Full duplex)
[ 8529.914523] IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
[ 8880.112215] eth1: link down
[ 8882.383496] eth1: link up (100Mbps/Full duplex)
[ 8882.388796] IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
[ 9199.819312] eth1: link down
[ 9202.091975] eth1: link up (100Mbps/Full duplex)
[ 9202.096881] IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
[ 9356.713628] eth1: link down
[ 9358.954413] eth1: link up (100Mbps/Full duplex)
[ 9358.959717] IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
[ 9633.414597] eth1: link down
[ 9635.687330] eth1: link up (100Mbps/Full duplex)
[ 9635.692245] IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
[ 9684.873413] eth1: link down
[ 9687.110800] eth1: link up (100Mbps/Full duplex)
[ 9687.116036] IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
[10674.234523] eth1: link down
[10676.505354] eth1: link up (100Mbps/Full duplex)
[10676.510427] IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
[10983.699927] eth1: link down
[10985.941798] eth1: link up (100Mbps/Full duplex)
[10985.946692] IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
[11115.987273] eth1: link down
[11118.227019] eth1: link up (100Mbps/Full duplex)
[11118.231935] IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
[11258.511665] eth1: link down
[11260.752903] eth1: link up (100Mbps/Full duplex)
[11260.757818] IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
[12051.270601] eth1: link down
[12053.542580] eth1: link up (100Mbps/Full duplex)
[12053.547634] IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
[12224.548043] eth1: link down
[12226.820838] eth1: link up (100Mbps/Full duplex)
[12226.826133] IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
[13093.116349] eth1: link down
[13095.388099] eth1: link up (100Mbps/Full duplex)
[13095.393036] IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
[13237.723403] eth1: link down
[13239.994531] eth1: link up (100Mbps/Full duplex)
[13239.999449] IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
[13480.631361] eth1: link down
[13482.903933] eth1: link up (100Mbps/Full duplex)
[13482.908827] IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
[14079.986670] eth1: link down
[14082.865153] eth1: link up (100Mbps/Full duplex)
[14082.875799] IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
[14136.142960] eth1: link down
[14138.480152] eth1: link up (100Mbps/Full duplex)
[14138.485048] IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
[14326.892801] eth1: link down
[14329.165044] eth1: link up (100Mbps/Full duplex)
[14329.170437] IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
[15205.698224] eth1: link down
[15208.034072] eth1: link up (100Mbps/Full duplex)
[15208.038993] IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
[16868.939213] eth1: link down
[16871.691530] eth1: link up (100Mbps/Full duplex)
[16871.696502] IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
[17219.845264] eth1: link down
[17222.085945] eth1: link up (100Mbps/Full duplex)
[17222.091188] IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
[17266.116135] eth1: link down
[17268.358170] eth1: link up (100Mbps/Full duplex)
[17268.363287] IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
[18608.757159] eth1: link down
[18610.998442] eth1: link up (100Mbps/Full duplex)
[18611.003804] IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
[18764.595469] eth1: link down
[18766.836763] eth1: link up (100Mbps/Full duplex)
[18766.841656] IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
[20083.683566] eth1: link down
[20085.924491] eth1: link up (100Mbps/Full duplex)
[20085.929635] IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
[20258.977467] eth1: link down
[20261.250149] eth1: link up (100Mbps/Full duplex)
[20261.255096] IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
[20799.867102] eth1: link down
[20800.905538] eth1: link up (100Mbps/Full duplex)
[20801.403850] eth1: link down
[20803.739123] eth1: link up (100Mbps/Full duplex)
[20803.744597] IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
[20860.057661] eth1: link down
[20862.298378] eth1: link up (100Mbps/Full duplex)
[20862.303274] IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
[21054.806768] eth1: link down
[21057.335858] eth1: link up (100Mbps/Full duplex)
[21057.340763] IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
[21401.394255] eth1: link down
[21403.667456] eth1: link up (100Mbps/Full duplex)
[21403.673375] IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
[21526.544502] eth1: link down
[21528.785624] eth1: link up (100Mbps/Full duplex)
[21528.790873] IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
[22750.558286] eth1: link down
[22752.991528] eth1: link up (100Mbps/Full duplex)
[22752.996798] IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
[23049.946588] eth1: link down
[23052.667230] eth1: link up (100Mbps/Full duplex)
[23052.672628] IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
[23937.424784] eth1: link down
[23939.918740] eth1: link up (100Mbps/Full duplex)
[23939.923699] IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
[24151.883187] eth1: link down
[24154.155689] eth1: link up (100Mbps/Full duplex)
[24154.160921] IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
[24189.994240] eth1: link down
[24192.267137] eth1: link up (100Mbps/Full duplex)
[24192.272514] IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
[24815.876173] eth1: link down
[24818.146255] eth1: link up (100Mbps/Full duplex)
[24818.151147] IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
[24919.520764] eth1: link down
[24921.760804] eth1: link up (100Mbps/Full duplex)
[24921.765696] IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
[25562.774798] eth1: link down
[25565.047734] eth1: link up (100Mbps/Full duplex)
[25565.053118] IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
[25785.204201] eth1: link down
[25787.476678] eth1: link up (100Mbps/Full duplex)
[25787.481822] IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
[26773.733380] eth1: link down
[26776.714562] eth1: link up (100Mbps/Full duplex)
[26776.730903] IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
[26790.085415] eth1: link down
[26792.678448] eth1: link up (100Mbps/Full duplex)
[26792.697842] IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
[27487.164577] eth1: link down
[27489.660947] eth1: link up (100Mbps/Full duplex)
[27489.668112] IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
[28290.895944] eth1: link down
[28293.425287] eth1: link up (100Mbps/Full duplex)
[28293.437604] IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
[28658.059181] eth1: link down
[28660.812898] eth1: link up (100Mbps/Full duplex)
[28660.826712] IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
[28743.785857] eth1: link down
[28746.187045] eth1: link up (100Mbps/Full duplex)
[28746.191940] IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
[28782.025579] eth1: link down
[28784.266545] eth1: link up (100Mbps/Full duplex)
[28784.271471] IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
[30246.613459] eth1: link down
[30249.014683] eth1: link up (100Mbps/Full duplex)
[30249.019603] IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
[32144.537910] eth1: link down
[32147.131202] eth1: link up (100Mbps/Full duplex)
[32147.149670] IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
[38872.203135] eth1: link down
[38873.247956] eth1: link up (100Mbps/Full duplex)
[38873.695232] eth1: link down
[38876.139641] eth1: link up (100Mbps/Full duplex)
[38876.144565] IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
[39186.470864] eth1: link down
[39189.224149] eth1: link up (100Mbps/Full duplex)
[39189.238760] IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
[40019.293485] eth1: link down
[40022.302813] eth1: link up (100Mbps/Full duplex)
[40022.317265] IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
[41084.176732] eth1: link down
[41087.250081] eth1: link up (100Mbps/Full duplex)
[41087.260597] IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
[43065.688340] eth1: link down
[43066.762455] eth1: link up (100Mbps/Full duplex)
[43066.780405] eth1: link down
[43068.953581] eth1: link up (100Mbps/Full duplex)
[43068.964050] IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
[45176.735987] eth1: link down
[45177.813318] eth1: link up (100Mbps/Full duplex)
[45177.929459] eth1: link down
[45180.003569] eth1: link up (100Mbps/Full duplex)
[45180.015357] IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
[47273.319242] eth1: link down
[47275.708534] eth1: link up (100Mbps/Full duplex)
[47275.718181] IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
[47301.574020] eth1: link down
[47304.040059] eth1: link up (100Mbps/Full duplex)
[47304.045503] IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
[47480.355611] eth1: link down
[47481.427781] eth1: link up (100Mbps/Full duplex)
[47481.447013] eth1: link down
[47483.556901] eth1: link up (100Mbps/Full duplex)
[47483.567363] IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
[53730.071248] eth1: link down
[53731.096636] eth1: link up (100Mbps/Full duplex)
[53732.239828] eth1: link down
[53734.649205] eth1: link up (100Mbps/Full duplex)
[53734.654139] IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
[54051.443072] ath10k_pci 0000:00:00.0: Cannot communicate with firmware, previous wmi cmds: 36967:13437256 36967:13437239 36965:13436981 40859:13436981, jiffies: 13438016, attempting to fake crash and restart firmware, dev-flags: 0x42
[54051.464514] ath10k_pci 0000:00:00.0: failed to send wmi nop: -143
[54051.470856] ath10k_pci 0000:00:00.0: could not request stats (type -268435456 ret -143 specifier 1)
[54051.589474] ath10k_pci 0000:00:00.0: firmware crashed! (guid n/a)
[54051.595832] ath10k_pci 0000:00:00.0: qca9888 hw2.0 target 0x01000000 chip_id 0x00000000 sub 0000:0000
[54051.605430] ath10k_pci 0000:00:00.0: kconfig debug 0 debugfs 1 tracing 0 dfs 1 testmode 0
[54051.625558] ath10k_pci 0000:00:00.0: firmware ver 10.4b-ct-9888-fW-013-d81f62d97 api 5 features mfp,peer-flow-ctrl,txstatus-noack,wmi-10.x-CT,ratemask-CT,regdump-CT,txrate-CT,flush-all-CT,pingpong-CT,ch-regs-CT,nop-CT,set-special-CT,tx-rc-CT,cust-stats-CT,txrate2-CT,beacon-cb-CT,wmi-block-ack-CT,wmi-bcn-rc-CT crc32 937128b4
[54051.655549] ath10k_pci 0000:00:00.0: board_file api 1 bmi_id 0:20 crc32 8971a1b4
[54051.663289] ath10k_pci 0000:00:00.0: htt-ver 2.2 wmi-op 6 htt-op 4 cal pre-cal-file max-sta 32 raw 0 hwcrypto 1
[54051.684158] ath10k_pci 0000:00:00.0: failed to get memcpy hi address for firmware address 4: -16
[54051.693254] ath10k_pci 0000:00:00.0: failed to read firmware dump area: -16
[54051.700454] ath10k_pci 0000:00:00.0: in crash-regs-harder
[54052.859201] ath10k_pci 0000:00:00.0: in crash-regs-harder, firmware did not provide indicator: 0x2
[54052.868542] ath10k_pci 0000:00:00.0: Copy Engine register dump:
[54052.874710] ath10k_pci 0000:00:00.0: [00]: 0x0004a000 5 5 3 3
[54052.881383] ath10k_pci 0000:00:00.0: [01]: 0x0004a400 21 21 91 92
[54052.888060] ath10k_pci 0000:00:00.0: [02]: 0x0004a800 63 63 62 63
[54052.894737] ath10k_pci 0000:00:00.0: [03]: 0x0004ac00 20 16 20 16
[54052.901405] ath10k_pci 0000:00:00.0: [04]: 0x0004b000 4791 4791 57 17
[54052.908248] ath10k_pci 0000:00:00.0: [05]: 0x0004b400 19 19 50 51
[54052.914919] ath10k_pci 0000:00:00.0: [06]: 0x0004b800 25 25 25 25
[54052.921580] ath10k_pci 0000:00:00.0: [07]: 0x0004bc00 0 1 0 1
[54052.928247] ath10k_pci 0000:00:00.0: [08]: 0x0004c000 0 0 127 0
[54052.934918] ath10k_pci 0000:00:00.0: [09]: 0x0004c400 0 0 0 0
[54052.941579] ath10k_pci 0000:00:00.0: [10]: 0x0004c800 0 0 0 0
[54052.948244] ath10k_pci 0000:00:00.0: [11]: 0x0004cc00 0 0 0 0
[54052.955045] ath10k_pci 0000:00:00.0: failed to get memcpy hi address for firmware address 8: -28
[54052.964224] ath10k_pci 0000:00:00.0: failed to dump debug log area: -28
[54054.231779] ath10k_pci 0000:00:00.0: failed to send pdev bss chan info request: -143
[54054.283727] ath10k_pci 0000:00:00.0: failed to set beacon mode for vdev 0: -143
[54054.291449] ath10k_pci 0000:00:00.0: failed to set dtim period for vdev 0: -143
[54054.299559] ath10k_pci 0000:00:00.0: failed to recalculate rts/cts prot for vdev 0: -143
[54054.308003] ath10k_pci 0000:00:00.0: failed to set cts protection for vdev 0: -143
[54054.315853] ath10k_pci 0000:00:00.0: failed to set preamble for vdev 0: -143
[54054.323152] ath10k_pci 0000:00:00.0: failed to set mgmt tx rate -143
[54057.534308] ath10k_pci 0000:00:00.0: removing peer, cleanup-all, deleting: peer e80ddcc2 vdev: 0 addr: 50:c7:bf:75:81:af
[54057.545794] ath10k_pci 0000:00:00.0: failed to read hi_board_data address: -28
[54057.710699] ieee80211 phy0: Hardware restart was requested
[54059.808138] ath10k_pci 0000:00:00.0: unsupported HTC service id: 1536
[54059.815390] ath10k_pci 0000:00:00.0: 10.4 wmi init: vdevs: 16 peers: 48 tid: 96
[54059.823264] ath10k_pci 0000:00:00.0: msdu-desc: 2500 skid: 32
[54059.853446] ath10k_pci 0000:00:00.0: wmi print 'P 48/48 V 16 K 144 PH 176 T 186 msdu-desc: 2500 sw-crypt: 0 ct-sta: 0'
[54059.864797] ath10k_pci 0000:00:00.0: wmi print 'free: 114524 iram: 12628 sram: 29508'
[54060.177482] ath10k_pci 0000:00:00.0: Firmware lacks feature flag indicating a retry limit of > 2 is OK, requested limit: 4
[54060.387955] ath10k_pci 0000:00:00.0: device successfully recovered
[56380.150084] eth1: link down
[56382.455362] eth1: link up (100Mbps/Full duplex)
[56382.460915] IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
[57573.479020] eth1: link down
[57575.848305] eth1: link up (100Mbps/Full duplex)
[57575.857942] IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
[62279.278882] eth1: link down
[62282.093972] eth1: link up (100Mbps/Full duplex)
[62282.106792] IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
[62566.921643] eth1: link down
[62569.642374] eth1: link up (100Mbps/Full duplex)
[62569.647702] IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
[64258.228833] eth1: link down
[64260.469184] eth1: link up (100Mbps/Full duplex)
[64260.475349] IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
[64432.498472] eth1: link down
[64434.770921] eth1: link up (100Mbps/Full duplex)
[64434.776356] IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
[64681.582940] eth1: link down
[64683.855712] eth1: link up (100Mbps/Full duplex)
[64683.860607] IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
[67376.940335] eth1: link down
[67379.277635] eth1: link up (100Mbps/Full duplex)
[67379.294109] IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
[68199.649623] eth1: link down
[68201.958955] eth1: link up (100Mbps/Full duplex)
[68201.969490] IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
[68440.734545] eth1: link down
[68443.103654] eth1: link up (100Mbps/Full duplex)
[68443.110942] IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
[68926.670978] eth1: link down
[68928.765150] eth1: link up (100Mbps/Full duplex)
[68928.783506] IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
[69076.342428] eth1: link down
[69078.711358] eth1: link up (100Mbps/Full duplex)
[69078.716498] IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
[69122.741131] eth1: link down
[69125.815266] eth1: link up (100Mbps/Full duplex)
[69125.822898] IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
[69135.124950] eth1: link down
[69137.334553] eth1: link up (100Mbps/Full duplex)
[69137.340172] IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
[69379.154014] eth1: link down
[69381.426908] eth1: link up (100Mbps/Full duplex)
[69381.432153] IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready

root@archer_c60:~# logread | grep udhcpc
Tue Aug 4 14:00:10 2020 daemon.notice netifd: wan (11433): udhcpc: received SIGTERM
Tue Aug 4 14:00:10 2020 daemon.notice netifd: wan (11433): udhcpc: unicasting a release of 190.244.135.61 to 172.20.2.226
Tue Aug 4 14:00:10 2020 daemon.notice netifd: wan (11433): udhcpc: sending release
Tue Aug 4 14:00:10 2020 daemon.notice netifd: wan (11433): udhcpc: entering released state
Tue Aug 4 14:00:12 2020 daemon.notice netifd: wan (12732): udhcpc: started, v1.31.1
Tue Aug 4 14:00:12 2020 daemon.notice netifd: wan (12732): udhcpc: sending discover
Tue Aug 4 14:00:15 2020 daemon.notice netifd: wan (12732): udhcpc: sending discover
Tue Aug 4 14:00:15 2020 daemon.notice netifd: wan (12732): udhcpc: sending select for 190.244.135.61
Tue Aug 4 14:00:15 2020 daemon.notice netifd: wan (12732): udhcpc: lease of 190.244.135.61 obtained, lease time 11197
Tue Aug 4 14:04:19 2020 daemon.notice netifd: wan (12732): udhcpc: received SIGTERM
Tue Aug 4 14:04:19 2020 daemon.notice netifd: wan (12732): udhcpc: unicasting a release of 190.244.135.61 to 172.20.2.226
Tue Aug 4 14:04:19 2020 daemon.notice netifd: wan (12732): udhcpc: sending release
Tue Aug 4 14:04:19 2020 daemon.notice netifd: wan (12732): udhcpc: entering released state
Tue Aug 4 14:04:21 2020 daemon.notice netifd: wan (13989): udhcpc: started, v1.31.1
Tue Aug 4 14:04:21 2020 daemon.notice netifd: wan (13989): udhcpc: sending discover
Tue Aug 4 14:04:21 2020 daemon.notice netifd: wan (13989): udhcpc: sending select for 190.244.135.61
Tue Aug 4 14:04:21 2020 daemon.notice netifd: wan (13989): udhcpc: lease of 190.244.135.61 obtained, lease time 10951
Tue Aug 4 14:49:14 2020 daemon.notice netifd: wan (13989): udhcpc: received SIGTERM
Tue Aug 4 14:49:14 2020 daemon.notice netifd: wan (13989): udhcpc: unicasting a release of 190.244.135.61 to 172.20.2.226
Tue Aug 4 14:49:14 2020 daemon.notice netifd: wan (13989): udhcpc: sending release
Tue Aug 4 14:49:14 2020 daemon.notice netifd: wan (13989): udhcpc: entering released state
Tue Aug 4 14:49:17 2020 daemon.notice netifd: wan (15789): udhcpc: started, v1.31.1
Tue Aug 4 14:49:17 2020 daemon.notice netifd: wan (15789): udhcpc: sending discover
Tue Aug 4 14:49:17 2020 daemon.notice netifd: wan (15789): udhcpc: sending select for 190.244.135.61
Tue Aug 4 14:49:17 2020 daemon.notice netifd: wan (15789): udhcpc: lease of 190.244.135.61 obtained, lease time 19655
Tue Aug 4 15:02:57 2020 daemon.notice netifd: wan (15789): udhcpc: received SIGTERM
Tue Aug 4 15:02:57 2020 daemon.notice netifd: wan (15789): udhcpc: unicasting a release of 190.244.135.61 to 172.20.2.226
Tue Aug 4 15:02:57 2020 daemon.notice netifd: wan (15789): udhcpc: sending release
Tue Aug 4 15:02:57 2020 daemon.notice netifd: wan (15789): udhcpc: entering released state
Tue Aug 4 15:03:00 2020 daemon.notice netifd: wan (17240): udhcpc: started, v1.31.1
Tue Aug 4 15:03:00 2020 daemon.notice netifd: wan (17240): udhcpc: sending discover
Tue Aug 4 15:03:00 2020 daemon.notice netifd: wan (17240): udhcpc: sending select for 190.244.135.61
Tue Aug 4 15:03:00 2020 daemon.notice netifd: wan (17240): udhcpc: lease of 190.244.135.61 obtained, lease time 18833
Tue Aug 4 15:06:58 2020 daemon.notice netifd: wan (17240): udhcpc: received SIGTERM
Tue Aug 4 15:06:58 2020 daemon.notice netifd: wan (17240): udhcpc: unicasting a release of 190.244.135.61 to 172.20.2.226
Tue Aug 4 15:06:58 2020 daemon.notice netifd: wan (17240): udhcpc: sending release
Tue Aug 4 15:06:58 2020 daemon.notice netifd: wan (17240): udhcpc: entering released state
Tue Aug 4 15:07:01 2020 daemon.notice netifd: wan (18540): udhcpc: started, v1.31.1
Tue Aug 4 15:07:01 2020 daemon.notice netifd: wan (18540): udhcpc: sending discover
Tue Aug 4 15:07:01 2020 daemon.notice netifd: wan (18540): udhcpc: sending select for 190.244.135.61
Tue Aug 4 15:07:01 2020 daemon.notice netifd: wan (18540): udhcpc: lease of 190.244.135.61 obtained, lease time 18592
Tue Aug 4 15:15:04 2020 daemon.notice netifd: wan (18540): udhcpc: received SIGTERM
Tue Aug 4 15:15:04 2020 daemon.notice netifd: wan (18540): udhcpc: unicasting a release of 190.244.135.61 to 172.20.2.226
Tue Aug 4 15:15:04 2020 daemon.notice netifd: wan (18540): udhcpc: sending release
Tue Aug 4 15:15:04 2020 daemon.notice netifd: wan (18540): udhcpc: entering released state
Tue Aug 4 15:15:07 2020 daemon.notice netifd: wan (20037): udhcpc: started, v1.31.1
Tue Aug 4 15:15:07 2020 daemon.notice netifd: wan (20037): udhcpc: sending discover
Tue Aug 4 15:15:10 2020 daemon.notice netifd: wan (20037): udhcpc: sending discover
Tue Aug 4 15:15:10 2020 daemon.notice netifd: wan (20037): udhcpc: sending select for 190.244.135.61
Tue Aug 4 15:15:10 2020 daemon.notice netifd: wan (20037): udhcpc: lease of 190.244.135.61 obtained, lease time 600
Tue Aug 4 15:17:34 2020 daemon.notice netifd: wan (20037): udhcpc: received SIGTERM
Tue Aug 4 15:17:34 2020 daemon.notice netifd: wan (20037): udhcpc: unicasting a release of 190.244.135.61 to 172.20.2.226
Tue Aug 4 15:17:34 2020 daemon.notice netifd: wan (20037): udhcpc: sending release
Tue Aug 4 15:17:34 2020 daemon.notice netifd: wan (20037): udhcpc: entering released state
Tue Aug 4 15:17:36 2020 daemon.notice netifd: wan (21065): udhcpc: started, v1.31.1
Tue Aug 4 15:17:36 2020 daemon.notice netifd: wan (21065): udhcpc: sending discover
Tue Aug 4 15:17:37 2020 daemon.notice netifd: wan (21065): udhcpc: sending select for 190.244.135.61
Tue Aug 4 15:17:37 2020 daemon.notice netifd: wan (21065): udhcpc: lease of 190.244.135.61 obtained, lease time 453
Tue Aug 4 15:18:21 2020 daemon.notice netifd: wan (21065): udhcpc: received SIGTERM
Tue Aug 4 15:18:21 2020 daemon.notice netifd: wan (21065): udhcpc: unicasting a release of 190.244.135.61 to 172.20.2.226
Tue Aug 4 15:18:21 2020 daemon.notice netifd: wan (21065): udhcpc: sending release
Tue Aug 4 15:18:21 2020 daemon.notice netifd: wan (21065): udhcpc: entering released state
Tue Aug 4 15:18:23 2020 daemon.notice netifd: wan (21840): udhcpc: started, v1.31.1
Tue Aug 4 15:18:23 2020 daemon.notice netifd: wan (21840): udhcpc: sending discover
Tue Aug 4 15:18:23 2020 daemon.notice netifd: wan (21840): udhcpc: sending select for 190.244.135.61
Tue Aug 4 15:18:23 2020 daemon.notice netifd: wan (21840): udhcpc: lease of 190.244.135.61 obtained, lease time 406
Tue Aug 4 15:18:33 2020 daemon.notice netifd: wan (21840): udhcpc: received SIGTERM
Tue Aug 4 15:18:33 2020 daemon.notice netifd: wan (21840): udhcpc: unicasting a release of 190.244.135.61 to 172.20.2.226
Tue Aug 4 15:18:33 2020 daemon.notice netifd: wan (21840): udhcpc: sending release
Tue Aug 4 15:18:33 2020 daemon.notice netifd: wan (21840): udhcpc: entering released state
Tue Aug 4 15:18:35 2020 daemon.notice netifd: wan (22614): udhcpc: started, v1.31.1
Tue Aug 4 15:18:35 2020 daemon.notice netifd: wan (22614): udhcpc: sending discover
Tue Aug 4 15:18:35 2020 daemon.notice netifd: wan (22614): udhcpc: sending select for 190.244.135.61
Tue Aug 4 15:18:35 2020 daemon.notice netifd: wan (22614): udhcpc: lease of 190.244.135.61 obtained, lease time 395
Tue Aug 4 15:21:52 2020 daemon.notice netifd: wan (22614): udhcpc: sending renew to 172.20.2.226
Tue Aug 4 15:21:52 2020 daemon.notice netifd: wan (22614): udhcpc: lease of 190.244.135.61 obtained, lease time 21600
Tue Aug 4 15:22:37 2020 daemon.notice netifd: wan (22614): udhcpc: received SIGTERM
Tue Aug 4 15:22:37 2020 daemon.notice netifd: wan (22614): udhcpc: unicasting a release of 190.244.135.61 to 172.20.2.226
Tue Aug 4 15:22:37 2020 daemon.notice netifd: wan (22614): udhcpc: sending release
Tue Aug 4 15:22:37 2020 daemon.notice netifd: wan (22614): udhcpc: entering released state
Tue Aug 4 15:22:39 2020 daemon.notice netifd: wan (23460): udhcpc: started, v1.31.1
Tue Aug 4 15:22:39 2020 daemon.notice netifd: wan (23460): udhcpc: sending discover
Tue Aug 4 15:22:39 2020 daemon.notice netifd: wan (23460): udhcpc: sending select for 190.244.135.61
Tue Aug 4 15:22:39 2020 daemon.notice netifd: wan (23460): udhcpc: lease of 190.244.135.61 obtained, lease time 21553

root@archer_c60:~# opkg list-installed
6to4 - 13
ath10k-firmware-qca9888-ct - 2020-04-24-2
base-files - 225-r14025-009e62c92c
busybox - 1.31.1-1
cgi-io - 19
ddns-scripts - 2.7.8-21
dnsmasq - 2.82-3
dropbear - 2020.80-1
firewall - 2020-07-25-e9b90dfa-1
fstools - 2020-06-17-d34ea8eb-1
fwtool - 2019-11-12-8f7fe925-1
getrandom - 2019-12-31-0e34af14-4
hostapd-common - 2020-06-08-5a8b3662-3
htop - 2.2.0-3
ip-tiny - 5.7.0-2
ip6tables - 1.8.4-1
iperf3 - 3.7-1
iptables - 1.8.4-1
iptables-mod-conntrack-extra - 1.8.4-1
iptables-mod-ipopt - 1.8.4-1
iw - 5.4-1
iwinfo - 2020-06-03-2faa20e5-1
jshn - 2020-07-11-f4e9bf73-1
jsonfilter - 2018-02-04-c7e938d6-1
kernel - 5.4.52-1-a3b0c799c80449fa80b53cf0e54c74e1
kmod-ath - 5.4.52+5.8-rc2-1-1
kmod-ath10k-ct-smallbuffers - 5.4.52+2020-06-30-edfbf916-1
kmod-ath9k - 5.4.52+5.8-rc2-1-1
kmod-ath9k-common - 5.4.52+5.8-rc2-1-1
kmod-cfg80211 - 5.4.52+5.8-rc2-1-1
kmod-gpio-button-hotplug - 5.4.52-3
kmod-hwmon-core - 5.4.52-1
kmod-ifb - 5.4.52-1
kmod-ip6tables - 5.4.52-1
kmod-ipt-conntrack - 5.4.52-1
kmod-ipt-conntrack-extra - 5.4.52-1
kmod-ipt-core - 5.4.52-1
kmod-ipt-ipopt - 5.4.52-1
kmod-ipt-nat - 5.4.52-1
kmod-ipt-offload - 5.4.52-1
kmod-ipt-raw - 5.4.52-1
kmod-iptunnel - 5.4.52-1
kmod-iptunnel4 - 5.4.52-1
kmod-ledtrig-default-on - 5.4.52-1
kmod-ledtrig-heartbeat - 5.4.52-1
kmod-ledtrig-netdev - 5.4.52-1
kmod-ledtrig-timer - 5.4.52-1
kmod-mac80211 - 5.4.52+5.8-rc2-1-1
kmod-nf-conntrack - 5.4.52-1
kmod-nf-conntrack6 - 5.4.52-1
kmod-nf-flow - 5.4.52-1
kmod-nf-ipt - 5.4.52-1
kmod-nf-ipt6 - 5.4.52-1
kmod-nf-nat - 5.4.52-1
kmod-nf-reject - 5.4.52-1
kmod-nf-reject6 - 5.4.52-1
kmod-sched-cake - 5.4.52-1
kmod-sched-cake-virtual - 5.4.52+2020-07-24-48979385-1
kmod-sched-core - 5.4.52-1
kmod-sit - 5.4.52-1
kmod-udptunnel4 - 5.4.52-1
kmod-udptunnel6 - 5.4.52-1
kmod-wireguard - 5.4.52+1.0.20200729-1
libblobmsg-json - 2020-07-11-f4e9bf73-1
libc - 1.1.24-2
libelf1 - 0.179-1
libgcc1 - 8.4.0-2
libip4tc2 - 1.8.4-1
libip6tc2 - 1.8.4-1
libiwinfo-lua - 2020-06-03-2faa20e5-1
libiwinfo20200105 - 2020-06-03-2faa20e5-1
libjson-c5 - 0.14-1
libjson-script - 2020-07-11-f4e9bf73-1
liblua5.1.5 - 5.1.5-7
liblucihttp-lua - 2019-07-05-a34a17d5-1
liblucihttp0 - 2019-07-05-a34a17d5-1
libmbedtls12 - 2.16.6-1
libncurses6 - 6.2-1
libnl-tiny - 2019-10-29-0219008c-1
libopenssl1.1 - 1.1.1g-1
libpcre - 8.44-2
libpthread - 1.1.24-2
librt - 1.1.24-2
libubox20191228 - 2020-07-11-f4e9bf73-1
libubus-lua - 2020-02-05-171469e3-1
libubus20191227 - 2020-02-05-171469e3-1
libuci20130104 - 2020-04-24-ec8d3233-3
libuclient20160123 - 2020-06-17-c6609861-1
libustream-mbedtls20200215 - 2020-03-13-5e1bc342-1
libxtables12 - 1.8.4-1
logd - 2019-12-31-0e34af14-4
lua - 5.1.5-7
luci - git-20.216.62430-9acc7d8
luci-app-ddns - git-20.216.62430-9acc7d8
luci-app-firewall - git-20.216.62430-9acc7d8
luci-app-opkg - git-20.216.62430-9acc7d8
luci-app-sqm - 1.4.0
luci-app-wireguard - git-20.216.62430-9acc7d8
luci-base - git-20.216.62430-9acc7d8
luci-compat - git-20.216.62430-9acc7d8
luci-i18n-base-en - git-20.216.62430-9acc7d8
luci-i18n-base-es - git-20.216.62430-9acc7d8
luci-i18n-ddns-en - git-20.216.62430-9acc7d8
luci-i18n-ddns-es - git-20.216.62430-9acc7d8
luci-i18n-firewall-en - git-20.216.62430-9acc7d8
luci-i18n-firewall-es - git-20.216.62430-9acc7d8
luci-i18n-opkg-en - git-20.216.62430-9acc7d8
luci-i18n-opkg-es - git-20.216.62430-9acc7d8
luci-i18n-sqm-en - git-20.216.62430-9acc7d8
luci-i18n-sqm-es - git-20.216.62430-9acc7d8
luci-i18n-wireguard-en - git-20.216.62430-9acc7d8
luci-i18n-wireguard-es - git-20.216.62430-9acc7d8
luci-lib-base - git-20.216.62430-9acc7d8
luci-lib-ip - git-20.216.62430-9acc7d8
luci-lib-ipkg - git-20.216.62430-9acc7d8
luci-lib-jsonc - git-20.216.62430-9acc7d8
luci-lib-nixio - git-20.216.62430-9acc7d8
luci-mod-admin-full - git-20.216.62430-9acc7d8
luci-mod-network - git-20.216.62430-9acc7d8
luci-mod-status - git-20.216.62430-9acc7d8
luci-mod-system - git-20.216.62430-9acc7d8
luci-proto-ipv6 - git-20.216.62430-9acc7d8
luci-proto-ppp - git-20.216.62430-9acc7d8
luci-proto-wireguard - git-20.216.62430-9acc7d8
luci-ssl - git-20.216.62430-9acc7d8
luci-theme-argon - 2.2.1
luci-theme-bootstrap - git-20.216.62430-9acc7d8
luci-theme-openwrt-2020 - git-20.216.62430-9acc7d8
mtd - 25
nano - 5.0-1
netifd - 2020-06-06-51e9fb81-1
odhcp6c - 2020-03-28-f575351c-16
odhcpd - 2020-06-21-5da52992-4
openwrt-keyring - 2019-07-25-8080ef34-1
opkg - 2020-05-07-f2166a89-1
procd - 2020-07-30-2ae5cbcf-1
px5g-mbedtls - 9
rpcd - 2020-05-26-078bb57e-1
rpcd-mod-file - 2020-05-26-078bb57e-1
rpcd-mod-iwinfo - 2020-05-26-078bb57e-1
rpcd-mod-luci - 20191114
rpcd-mod-rrdns - 20170710
sqm-scripts - 1.4.0-8
swconfig - 12
tc - 5.7.0-2
terminfo - 6.2-1
uboot-envtools - 2020.04-1
ubox - 2019-12-31-0e34af14-4
ubus - 2020-02-05-171469e3-1
ubusd - 2020-02-05-171469e3-1
uci - 2020-04-24-ec8d3233-3
uclient-fetch - 2020-06-17-c6609861-1
uhttpd - 2020-06-03-939c281c-1
uhttpd-mod-ubus - 2020-06-03-939c281c-1
urandom-seed - 2
urngd - 2020-01-21-c7f7b6b6-1
usign - 2020-05-23-f1f65026-1
wget - 1.20.3-4
wireguard-tools - 1.0.20200513-1
wireless-regdb - 2020.04.29-1
wpad-basic - 2020-06-08-5a8b3662-3
zlib - 1.2.11-3

Supply the following if possible:

  • Device problem occurs on
  • Software versions of OpenWrt/LEDE release, packages, etc.
  • Steps to reproduce
@openwrt-bot
Copy link
Author

Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment
Labels
Projects
None yet
Development

No branches or pull requests

1 participant