You signed in with another tab or window. Reload to refresh your session.You signed out in another tab or window. Reload to refresh your session.You switched accounts on another tab or window. Reload to refresh your session.Dismiss alert
Problem/Bug:
If i keep the default 'flow control rx/tx' setting enabled for any LAN port, my upload speeds drop from my max 38 Mbit/s to 10 Mbit/s. Same happens if i put a unmanaged switch behind the router, that has RX/TX enabled and any device behind the switch than gets the reduced 10 Mbit/s upload speeds. The download speeds are unaffected, only the upload speed drops.
Steps to reproduce:
Just disable/enable 'flow control' on the client side for any LAN port. This bug happens independent of client OS/Network card used. Just enable/disable "Flow Control" in the Win10 adapter property page, than do some upload tests.
mv88e6085 f1072004.mdio-mii:00 lan1: Link is Up - 1Gbps/Full - flow control rx/tx
vs
mv88e6085 f1072004.mdio-mii:00 lan1: Link is Up - 1Gbps/Full - flow control off
PS: This worked fine before and i think started with the 5.4.x kernels on mvebu.
The text was updated successfully, but these errors were encountered:
Andy2244:
Device: WRT-1200AC
Openwrt Version: SNAPSHOT r13982-e9f7923a1d
Kernel: 5.4.x, tried also 5.4.53
Problem/Bug:
If i keep the default 'flow control rx/tx' setting enabled for any LAN port, my upload speeds drop from my max 38 Mbit/s to 10 Mbit/s. Same happens if i put a unmanaged switch behind the router, that has RX/TX enabled and any device behind the switch than gets the reduced 10 Mbit/s upload speeds. The download speeds are unaffected, only the upload speed drops.
Steps to reproduce:
Just disable/enable 'flow control' on the client side for any LAN port. This bug happens independent of client OS/Network card used. Just enable/disable "Flow Control" in the Win10 adapter property page, than do some upload tests.
mv88e6085 f1072004.mdio-mii:00 lan1: Link is Up - 1Gbps/Full - flow control rx/tx
vsmv88e6085 f1072004.mdio-mii:00 lan1: Link is Up - 1Gbps/Full - flow control off
PS: This worked fine before and i think started with the 5.4.x kernels on mvebu.
The text was updated successfully, but these errors were encountered: