OpenWrt/LEDE Project

  • Status Unconfirmed
  • Percent Complete
    0%
  • Task Type Bug Report
  • Category Base system
  • Assigned To No-one
  • Operating System All
  • Severity Medium
  • Priority Very Low
  • Reported Version Trunk
  • Due in Version Undecided
  • Due Date Undecided
  • Private
Attached to Project: OpenWrt/LEDE Project
Opened by WvdAkker - 16.06.2020

FS#3188 - No ethernet/wifi ports available after upgrade to trunk

Device: Zyxel P2812-F1
Software version: Trunk r13335-586661018e

Steps to reproduce:

1: use a working .config from 19.07 (also tried a diffconfig and make defconfig)
2: compile the trunk version
3: upload to the router
4: no ports are available, dmesg reports

[    0.658577] pinctrl-xway 1e100b10.pinmux: pin io5 already requested by 1e100bb0.stp; cannot claim for 1e108000.eth
[    0.667566] pinctrl-xway 1e100b10.pinmux: pin-5 (1e108000.eth) status -22
[    0.685238] lantiq,xrx200-net 1e108000.eth: Error applying setting, reverse things back
[    0.693270] lantiq,xrx200-net: probe of 1e108000.eth failed with error -22

See also attached .config

Thanks
Willem

   config (232.7 KiB)
WvdAkker commented on 16.06.2020 19:27

Note: switching back to 19.07 works ok.

Project Manager
Mathias Kresin commented on 16.06.2020 22:04

Would you please test the attached patch!

WvdAkker commented on 17.06.2020 06:25

Yes, the patch works!

Thanks.

Willem

WvdAkker commented on 30.06.2020 07:39

Hi,

Shall I make a pull request for this?

/Willem

Loading...

Available keyboard shortcuts

Tasklist

Task Details

Task Editing