Skip to content
New issue

Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.

By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.

Already on GitHub? Sign in to your account

FS#3136 - Alignment exceptions on ipq806x (r7800) #6422

Closed
openwrt-bot opened this issue May 29, 2020 · 0 comments
Closed

FS#3136 - Alignment exceptions on ipq806x (r7800) #6422

openwrt-bot opened this issue May 29, 2020 · 0 comments
Labels

Comments

@openwrt-bot
Copy link

Noltari:

I've got 2 Netgear R7800 with the same firmware built from OpenWrt master and only one of them is throwing alignment exceptions:
[ 0.000000] Booting Linux on physical CPU 0x0
[ 0.000000] Linux version 5.4.42 (noltari@skynet) (gcc version 8.4.0 (OpenWrt GCC 8.4.0 r13398+3-48e3449945)) #0 SMP Fri May 29 07:24:24 2020
[ 0.000000] CPU: ARMv7 Processor [512f04d0] revision 0 (ARMv7), cr=10c5787d
[ 0.000000] CPU: div instructions available: patching division code
[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache
[ 0.000000] OF: fdt: Machine model: Netgear Nighthawk X4S R7800
[ 0.000000] Memory policy: Data cache writealloc
[ 0.000000] On node 0 totalpages: 122880
[ 0.000000] Normal zone: 1080 pages used for memmap
[ 0.000000] Normal zone: 0 pages reserved
[ 0.000000] Normal zone: 122880 pages, LIFO batch:31
[ 0.000000] percpu: Embedded 15 pages/cpu s30028 r8192 d23220 u61440
[ 0.000000] pcpu-alloc: s30028 r8192 d23220 u61440 alloc=154096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 121800
[ 0.000000] Kernel command line:
[ 0.000000] Bootloader command line (ignored): console=ttyHSL1,115200n8
[ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes, linear)
[ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes, linear)
[ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
[ 0.000000] Memory: 474844K/491520K available (5893K kernel code, 188K rwdata, 1504K rodata, 1024K init, 228K bss, 16676K reserved, 0K cma-reserved, 0K highmem)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.000000] rcu: Hierarchical RCU implementation.
[ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies.
[ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
[ 0.000000] random: get_random_bytes called from start_kernel+0x340/0x4e8 with crng_init=0
[ 0.000000] clocksource: dg_timer: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 305801671480 ns
[ 0.000008] sched_clock: 32 bits at 6MHz, resolution 160ns, wraps every 343597383600ns
[ 0.000021] Switching to timer-based delay loop, resolution 160ns
[ 0.000242] Calibrating delay loop (skipped), value calculated using timer frequency.. 12.50 BogoMIPS (lpj=62500)
[ 0.000264] pid_max: default: 32768 minimum: 301
[ 0.000460] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linear)
[ 0.000479] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear)
[ 0.001501] CPU: Testing write buffer coherency: ok
[ 0.002636] Setting up static identity map for 0x42300000 - 0x42300060
[ 0.002809] rcu: Hierarchical SRCU implementation.
[ 0.003291] smp: Bringing up secondary CPUs ...
[ 0.005219] smp: Brought up 1 node, 2 CPUs
[ 0.005236] SMP: Total of 2 processors activated (25.00 BogoMIPS).
[ 0.005246] CPU: All CPU(s) started in SVC mode.
[ 0.015473] VFP support v0.3: implementor 51 architecture 64 part 4d variant 2 rev 0
[ 0.015630] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[ 0.015659] futex hash table entries: 512 (order: 3, 32768 bytes, linear)
[ 0.015823] pinctrl core: initialized pinctrl subsystem
[ 0.016942] NET: Registered protocol family 16
[ 0.017229] DMA: preallocated 256 KiB pool for atomic coherent allocations
[ 0.018531] cpuidle: using governor ladder
[ 0.018598] cpuidle: using governor menu
[ 0.055639] usbcore: registered new interface driver usbfs
[ 0.055720] usbcore: registered new interface driver hub
[ 0.055814] usbcore: registered new device driver usb
[ 0.055875] pps_core: LinuxPPS API ver. 1 registered
[ 0.055890] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti giometti@linux.it
[ 0.055930] PTP clock support registered
[ 0.057577] clocksource: Switched to clocksource dg_timer
[ 0.058439] thermal_sys: Registered thermal governor 'step_wise'
[ 0.060795] NET: Registered protocol family 2
[ 0.061381] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes, linear)
[ 0.061423] TCP established hash table entries: 4096 (order: 2, 16384 bytes, linear)
[ 0.061467] TCP bind hash table entries: 4096 (order: 3, 32768 bytes, linear)
[ 0.061522] TCP: Hash tables configured (established 4096 bind 4096)
[ 0.061627] UDP hash table entries: 256 (order: 1, 8192 bytes, linear)
[ 0.061657] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear)
[ 0.061896] NET: Registered protocol family 1
[ 0.061954] PCI: CLS 0 bytes, default 64
[ 0.063423] workingset: timestamp_bits=14 max_order=17 bucket_order=3
[ 0.070052] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 0.070068] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
[ 0.110296] qcom-pcie 1b500000.pci: 1b500000.pci supply vdda not found, using dummy regulator
[ 0.110440] qcom-pcie 1b500000.pci: 1b500000.pci supply vdda_phy not found, using dummy regulator
[ 0.110550] qcom-pcie 1b500000.pci: 1b500000.pci supply vdda_refclk not found, using dummy regulator
[ 0.110822] qcom-pcie 1b500000.pci: host bridge /soc/pci@1b500000 ranges:
[ 0.110850] qcom-pcie 1b500000.pci: Parsing ranges property...
[ 0.110898] qcom-pcie 1b500000.pci: IO 0x0fe00000..0x0fefffff -> 0x0fe00000
[ 0.110937] qcom-pcie 1b500000.pci: MEM 0x08000000..0x0fdfffff -> 0x08000000
[ 0.332501] qcom-pcie 1b500000.pci: Link up
[ 0.332674] qcom-pcie 1b500000.pci: PCI host bridge to bus 0000:00
[ 0.332696] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.332718] pci_bus 0000:00: root bus resource [io 0x0000-0xfffff] (bus address [0xfe00000-0xfefffff])
[ 0.332735] pci_bus 0000:00: root bus resource [mem 0x08000000-0x0fdfffff]
[ 0.332753] pci_bus 0000:00: scanning bus
[ 0.332804] pci 0000:00:00.0: [17cb:0101] type 01 class 0xff0000
[ 0.332976] pci 0000:00:00.0: supports D1
[ 0.332993] pci 0000:00:00.0: PME# supported from D0 D1 D3hot
[ 0.333014] pci 0000:00:00.0: PME# disabled
[ 0.337082] pci_bus 0000:00: fixups for bus
[ 0.337107] PCI: bus0: Fast back to back transfers disabled
[ 0.337129] pci 0000:00:00.0: scanning [bus 01-ff] behind bridge, pass 0
[ 0.337275] pci_bus 0000:01: scanning bus
[ 0.337456] pci 0000:01:00.0: [168c:0046] type 00 class 0x028000
[ 0.337925] pci 0000:01:00.0: reg 0x10: [mem 0x00000000-0x001fffff 64bit]
[ 0.339073] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold
[ 0.339120] pci 0000:01:00.0: PME# disabled
[ 0.343339] pci_bus 0000:01: fixups for bus
[ 0.343410] PCI: bus1: Fast back to back transfers disabled
[ 0.343428] pci_bus 0000:01: bus scan returning with max=01
[ 0.343446] pci 0000:00:00.0: scanning [bus 01-ff] behind bridge, pass 1
[ 0.343465] pci_bus 0000:00: bus scan returning with max=ff
[ 0.343499] pci 0000:00:00.0: BAR 8: assigned [mem 0x08000000-0x081fffff]
[ 0.343524] pci 0000:01:00.0: BAR 0: assigned [mem 0x08000000-0x081fffff 64bit]
[ 0.343652] pci 0000:00:00.0: PCI bridge to [bus 01-ff]
[ 0.343677] pci 0000:00:00.0: bridge window [mem 0x08000000-0x081fffff]
[ 0.343887] pcieport 0000:00:00.0: assign IRQ: got 35
[ 0.344639] pcieport 0000:00:00.0: AER: enabled with IRQ 36
[ 0.345252] qcom-pcie 1b700000.pci: 1b700000.pci supply vdda not found, using dummy regulator
[ 0.345380] qcom-pcie 1b700000.pci: 1b700000.pci supply vdda_phy not found, using dummy regulator
[ 0.345517] qcom-pcie 1b700000.pci: 1b700000.pci supply vdda_refclk not found, using dummy regulator
[ 0.345770] qcom-pcie 1b700000.pci: host bridge /soc/pci@1b700000 ranges:
[ 0.345792] qcom-pcie 1b700000.pci: Parsing ranges property...
[ 0.345835] qcom-pcie 1b700000.pci: IO 0x31e00000..0x31efffff -> 0x31e00000
[ 0.345869] qcom-pcie 1b700000.pci: MEM 0x2e000000..0x31dfffff -> 0x2e000000
[ 0.575016] qcom-pcie 1b700000.pci: Link up
[ 0.575165] qcom-pcie 1b700000.pci: PCI host bridge to bus 0001:00
[ 0.575184] pci_bus 0001:00: root bus resource [bus 00-ff]
[ 0.575203] pci_bus 0001:00: root bus resource [mem 0x2e000000-0x31dfffff]
[ 0.575219] pci_bus 0001:00: scanning bus
[ 0.575261] pci 0001:00:00.0: [17cb:0101] type 01 class 0xff0000
[ 0.575405] pci 0001:00:00.0: supports D1
[ 0.575422] pci 0001:00:00.0: PME# supported from D0 D1 D3hot
[ 0.575440] pci 0001:00:00.0: PME# disabled
[ 0.579554] pci_bus 0001:00: fixups for bus
[ 0.579576] PCI: bus0: Fast back to back transfers disabled
[ 0.579594] pci 0001:00:00.0: scanning [bus 01-ff] behind bridge, pass 0
[ 0.579730] pci_bus 0001:01: scanning bus
[ 0.579920] pci 0001:01:00.0: [168c:0046] type 00 class 0x028000
[ 0.580297] pci 0001:01:00.0: reg 0x10: [mem 0x00000000-0x001fffff 64bit]
[ 0.581531] pci 0001:01:00.0: PME# supported from D0 D3hot D3cold
[ 0.581581] pci 0001:01:00.0: PME# disabled
[ 0.581834] pci 0001:01:00.0: 2.000 Gb/s available PCIe bandwidth, limited by 2.5 GT/s x1 link at 0001:00:00.0 (capable of 4.000 Gb/s with 5 GT/s x1 link)
[ 0.585838] pci_bus 0001:01: fixups for bus
[ 0.585914] PCI: bus1: Fast back to back transfers disabled
[ 0.585932] pci_bus 0001:01: bus scan returning with max=01
[ 0.585949] pci 0001:00:00.0: scanning [bus 01-ff] behind bridge, pass 1
[ 0.585967] pci_bus 0001:00: bus scan returning with max=ff
[ 0.585991] pci 0001:00:00.0: BAR 8: assigned [mem 0x2e000000-0x2e1fffff]
[ 0.586014] pci 0001:01:00.0: BAR 0: assigned [mem 0x2e000000-0x2e1fffff 64bit]
[ 0.586146] pci 0001:00:00.0: PCI bridge to [bus 01-ff]
[ 0.586168] pci 0001:00:00.0: bridge window [mem 0x2e000000-0x2e1fffff]
[ 0.586379] pcieport 0001:00:00.0: assign IRQ: got 37
[ 0.587054] pcieport 0001:00:00.0: AER: enabled with IRQ 38
[ 0.589655] L2 @ QSB rate. Forcing new rate.
[ 0.589884] L2 @ 384000 KHz
[ 0.590062] CPU0 @ 800000 KHz
[ 0.590074] CPU1 @ QSB rate. Forcing new rate.
[ 0.590200] CPU1 @ 384000 KHz
[ 0.593784] gsbi 16300000.gsbi: GSBI port protocol: 6 crci: 0
[ 0.595940] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled
[ 0.596712] msm_serial 16340000.serial: msm_serial: detected port #0
[ 0.596767] msm_serial 16340000.serial: uartclk = 7372800
[ 0.596839] 16340000.serial: ttyMSM0 at MMIO 0x16340000 (irq = 39, base_baud = 460800) is a MSM
[ 0.596876] msm_serial: console setup on port #0
[ 1.363216] printk: console [ttyMSM0] enabled
[ 1.368292] msm_serial: driver initialized
[ 1.377328] loop: module loaded
[ 1.379017] nand: device found, Manufacturer ID: 0x2c, Chip ID: 0xa1
[ 1.379280] nand: Micron MT29F1G08ABBEAH4
[ 1.385875] nand: 128 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64
[ 1.389975] 8 fixed-partitions partitions found on MTD device qcom_nand.0
[ 1.397246] Creating 8 MTD partitions on "qcom_nand.0":
[ 1.404197] 0x000000000000-0x000000c80000 : "qcadata"
[ 1.414344] random: fast init done
[ 1.430388] 0x000000c80000-0x000001180000 : "APPSBL"
[ 1.439436] 0x000001180000-0x000001200000 : "APPSBLENV"
[ 1.441172] 0x000001200000-0x000001340000 : "art"
[ 1.446411] 0x000001340000-0x000001480000 : "artbak"
[ 1.451329] 0x000001480000-0x000001880000 : "kernel"
[ 1.460780] 0x000001880000-0x000007900000 : "ubi"
[ 1.616654] 0x000007900000-0x000008000000 : "reserve"
[ 1.630468] libphy: ipq8064_mdio_bus: probed
[ 1.680369] switch0: Atheros AR8337 rev. 2 switch registered on 37000000.mdio-mii
[ 2.830271] ar8327: qca,phy-rgmii-en is not specified
[ 2.830690] libphy: Fixed MDIO Bus: probed
[ 2.835000] ipq806x-gmac-dwmac 37200000.ethernet: IRQ eth_wake_irq not found
[ 2.838388] ipq806x-gmac-dwmac 37200000.ethernet: IRQ eth_lpi not found
[ 2.846280] ipq806x-gmac-dwmac 37200000.ethernet: PTP uses main clock
[ 2.852700] ipq806x-gmac-dwmac 37200000.ethernet: User ID: 0x10, Synopsys ID: 0x37
[ 2.858554] ipq806x-gmac-dwmac 37200000.ethernet: DWMAC1000
[ 2.865905] ipq806x-gmac-dwmac 37200000.ethernet: DMA HW capability register supported
[ 2.871821] ipq806x-gmac-dwmac 37200000.ethernet: RX Checksum Offload Engine supported
[ 2.879527] ipq806x-gmac-dwmac 37200000.ethernet: COE Type 2
[ 2.887343] ipq806x-gmac-dwmac 37200000.ethernet: TX Checksum insertion supported
[ 2.893240] ipq806x-gmac-dwmac 37200000.ethernet: Wake-Up On Lan supported
[ 2.900614] ipq806x-gmac-dwmac 37200000.ethernet: Enhanced/Alternate descriptors
[ 2.907311] ipq806x-gmac-dwmac 37200000.ethernet: Enabled extended descriptors
[ 2.914952] ipq806x-gmac-dwmac 37200000.ethernet: Ring mode enabled
[ 2.921981] ipq806x-gmac-dwmac 37200000.ethernet: Enable RX Mitigation via HW Watchdog Timer
[ 2.929043] ipq806x-gmac-dwmac 37400000.ethernet: IRQ eth_wake_irq not found
[ 2.936741] ipq806x-gmac-dwmac 37400000.ethernet: IRQ eth_lpi not found
[ 2.944042] ipq806x-gmac-dwmac 37400000.ethernet: PTP uses main clock
[ 2.950690] ipq806x-gmac-dwmac 37400000.ethernet: User ID: 0x10, Synopsys ID: 0x37
[ 2.956706] ipq806x-gmac-dwmac 37400000.ethernet: DWMAC1000
[ 2.964259] ipq806x-gmac-dwmac 37400000.ethernet: DMA HW capability register supported
[ 2.970068] ipq806x-gmac-dwmac 37400000.ethernet: RX Checksum Offload Engine supported
[ 2.977711] ipq806x-gmac-dwmac 37400000.ethernet: COE Type 2
[ 2.985678] ipq806x-gmac-dwmac 37400000.ethernet: TX Checksum insertion supported
[ 2.991489] ipq806x-gmac-dwmac 37400000.ethernet: Wake-Up On Lan supported
[ 2.998861] ipq806x-gmac-dwmac 37400000.ethernet: Enhanced/Alternate descriptors
[ 3.005574] ipq806x-gmac-dwmac 37400000.ethernet: Enabled extended descriptors
[ 3.013201] ipq806x-gmac-dwmac 37400000.ethernet: Ring mode enabled
[ 3.020231] ipq806x-gmac-dwmac 37400000.ethernet: Enable RX Mitigation via HW Watchdog Timer
[ 3.027308] i2c /dev entries driver
[ 3.037342] cpuidle: enable-method property 'qcom,kpss-acc-v1' found operations
[ 3.038412] cpuidle: enable-method property 'qcom,kpss-acc-v1' found operations
[ 3.046079] sdhci: Secure Digital Host Controller Interface driver
[ 3.052874] sdhci: Copyright(c) Pierre Ossman
[ 3.059120] sdhci-pltfm: SDHCI platform and OF driver helper
[ 3.066091] NET: Registered protocol family 10
[ 3.070704] Segment Routing with IPv6
[ 3.073540] NET: Registered protocol family 17
[ 3.077458] 8021q: 802.1Q VLAN Support v1.8
[ 3.081686] Registering SWP/SWPB emulation handler
[ 3.109432] qcom_rpm 108000.rpm: RPM firmware 3.0.16777364
[ 3.122994] s1a: supplied by regulator-dummy
[ 3.123099] s1a: Bringing 0uV into 1050000-1050000uV
[ 3.126619] s1b: supplied by regulator-dummy
[ 3.131476] s1b: Bringing 0uV into 1050000-1050000uV
[ 3.135788] s2a: supplied by regulator-dummy
[ 3.140649] s2a: Bringing 0uV into 775000-775000uV
[ 3.144996] s2b: supplied by regulator-dummy
[ 3.149481] s2b: Bringing 0uV into 775000-775000uV
[ 3.155482] Speed bin: 0
[ 3.158434] PVS bin: 4
[ 3.169157] UBI: auto-attach mtd6
[ 3.169175] ubi0: attaching mtd6
[ 3.231841] random: crng init done
[ 3.863297] ubi0: scanning is finished
[ 3.872737] ubi0: attached mtd6 (name "ubi", size 96 MiB)
[ 3.872757] ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
[ 3.877104] ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
[ 3.883959] ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096
[ 3.890790] ubi0: good PEBs: 772, bad PEBs: 0, corrupted PEBs: 0
[ 3.897503] ubi0: user volume: 2, internal volumes: 1, max. volumes count: 128
[ 3.903813] ubi0: max/mean erase counter: 8/4, WL threshold: 4096, image sequence number: 1164284368
[ 3.910842] ubi0: available PEBs: 0, total reserved PEBs: 772, PEBs reserved for bad PEB handling: 20
[ 3.920258] ubi0: background thread "ubi_bgt0d" started, PID 93
[ 3.920861] block ubiblock0_0: created from ubi0:0(rootfs)
[ 3.934915] ubiblock: device ubiblock0_0 (rootfs) set to be root filesystem
[ 3.940521] hctosys: unable to open rtc device (rtc0)
[ 3.952741] VFS: Mounted root (squashfs filesystem) readonly on device 254:0.
[ 3.954223] Freeing unused kernel memory: 1024K
[ 3.988265] Run /sbin/init as init process
[ 4.441889] init: Console is alive
[ 4.442057] init: - watchdog -
[ 5.259389] kmodloader: loading kernel modules from /etc/modules-boot.d/

[ 5.276144] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 5.278921] SCSI subsystem initialized
[ 5.285174] libata version 3.00 loaded.
[ 5.286877] ahci 29000000.sata: 29000000.sata supply ahci not found, using dummy regulator
[ 5.286970] ahci 29000000.sata: 29000000.sata supply phy not found, using dummy regulator
[ 5.294151] ahci 29000000.sata: 29000000.sata supply target not found, using dummy regulator
[ 5.302769] ahci 29000000.sata: forcing port_map 0x0 -> 0x1
[ 5.310869] ahci 29000000.sata: AHCI 0001.0300 32 slots 1 ports 6 Gbps 0x1 impl platform mode
[ 5.316080] ahci 29000000.sata: flags: ncq sntf pm led clo only pmp pio slum part ccc apst
[ 5.326028] scsi host0: ahci
[ 5.333172] ata1: SATA max UDMA/133 mmio [mem 0x29000000-0x2900017f] port 0x100 irq 26
[ 5.660523] ata1: SATA link down (SStatus 0 SControl 300)
[ 5.665903] ehci-fsl: Freescale EHCI Host controller driver
[ 5.667476] ehci-platform: EHCI generic platform driver
[ 5.676974] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 5.677583] ohci-platform: OHCI generic platform driver
[ 5.684512] dwc3-qcom 110f8800.usb3: IRQ hs_phy_irq not found
[ 5.687166] dwc3-qcom 110f8800.usb3: IRQ dp_hs_phy_irq not found
[ 5.693178] dwc3-qcom 110f8800.usb3: IRQ dm_hs_phy_irq not found
[ 5.699223] dwc3-qcom 110f8800.usb3: IRQ ss_phy_irq not found
[ 5.707257] dwc3-qcom 100f8800.usb3: IRQ hs_phy_irq not found
[ 5.710836] dwc3-qcom 100f8800.usb3: IRQ dp_hs_phy_irq not found
[ 5.716504] dwc3-qcom 100f8800.usb3: IRQ dm_hs_phy_irq not found
[ 5.722664] dwc3-qcom 100f8800.usb3: IRQ ss_phy_irq not found
[ 5.732523] dwc3 11000000.dwc3: Failed to get clk 'ref': -2
[ 5.788480] dwc3 10000000.dwc3: Failed to get clk 'ref': -2
[ 5.851309] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
[ 5.851368] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1
[ 5.855876] xhci-hcd xhci-hcd.0.auto: hcc params 0x0228f065 hci version 0x100 quirks 0x0000000002010010
[ 5.863381] xhci-hcd xhci-hcd.0.auto: irq 43, io mem 0x11000000
[ 5.873615] hub 1-0:1.0: USB hub found
[ 5.878642] hub 1-0:1.0: 1 port detected
[ 5.882543] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
[ 5.886429] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2
[ 5.891780] xhci-hcd xhci-hcd.0.auto: Host supports USB 3.0 SuperSpeed
[ 5.899421] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
[ 5.906190] hub 2-0:1.0: USB hub found
[ 5.914200] hub 2-0:1.0: 1 port detected
[ 5.919357] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller
[ 5.921756] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 3
[ 5.927172] xhci-hcd xhci-hcd.1.auto: hcc params 0x0228f065 hci version 0x100 quirks 0x0000000002010010
[ 5.934694] xhci-hcd xhci-hcd.1.auto: irq 44, io mem 0x10000000
[ 5.944582] hub 3-0:1.0: USB hub found
[ 5.949969] hub 3-0:1.0: 1 port detected
[ 5.953865] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller
[ 5.957774] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 4
[ 5.963142] xhci-hcd xhci-hcd.1.auto: Host supports USB 3.0 SuperSpeed
[ 5.971416] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
[ 5.977540] hub 4-0:1.0: USB hub found
[ 5.985562] hub 4-0:1.0: 1 port detected
[ 5.990721] kmodloader: done loading kernel modules from /etc/modules-boot.d/*
[ 6.000453] init: - preinit -
[ 8.211376] dwmac1000: Master AXI performs any burst length
[ 8.211407] ipq806x-gmac-dwmac 37400000.ethernet eth1: No Safety Features support found
[ 8.215754] ipq806x-gmac-dwmac 37400000.ethernet eth1: IEEE 1588-2008 Advanced Timestamp supported
[ 8.223915] ipq806x-gmac-dwmac 37400000.ethernet eth1: registered PTP clock
[ 8.232848] ipq806x-gmac-dwmac 37400000.ethernet eth1: configuring for fixed/sgmii link mode
[ 8.240251] ipq806x-gmac-dwmac 37400000.ethernet eth1: Link is Up - 1Gbps/Full - flow control off
[ 8.248558] IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
[ 12.418896] UBIFS (ubi0:1): Mounting in unauthenticated mode
[ 12.419040] UBIFS (ubi0:1): background thread "ubifs_bgt0_1" started, PID 180
[ 12.568955] UBIFS (ubi0:1): UBIFS: mounted UBI device 0, volume 1, name "rootfs_data"
[ 12.568978] UBIFS (ubi0:1): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
[ 12.575760] UBIFS (ubi0:1): FS size: 88248320 bytes (84 MiB, 695 LEBs), journal size 4444160 bytes (4 MiB, 35 LEBs)
[ 12.585725] UBIFS (ubi0:1): reserved for root: 4168186 bytes (4070 KiB)
[ 12.595982] UBIFS (ubi0:1): media format: w4/r0 (latest is w5/r0), UUID 05119043-2946-47B5-88DC-46E382FD2959, small LPT model
[ 12.608409] mount_root: overlay filesystem has not been fully initialized yet
[ 12.614216] mount_root: switching to ubifs overlay
[ 12.648550] overlayfs: upper fs does not support xattr, falling back to index=off and metacopy=off.
[ 12.709449] urandom-seed: Seed file not found (/etc/urandom.seed)
[ 12.802232] ipq806x-gmac-dwmac 37400000.ethernet eth1: Link is Down
[ 12.869339] procd: - early -
[ 12.869423] procd: - watchdog -
[ 13.416076] procd: - watchdog -
[ 13.416705] procd: - ubus -
[ 13.497779] procd: - init -
[ 13.807250] kmodloader: loading kernel modules from /etc/modules.d/*
[ 13.807481] urngd: v1.0.2 started.
[ 13.822992] Loading modules backported from Linux version v5.7-rc3-0-g6a8b55ed4056
[ 13.823016] Backport generated by backports.git v5.7-rc3-1-0-gc0c7d2bb
[ 13.835774] wireguard: WireGuard 1.0.20200520 loaded. See www.wireguard.com for information.
[ 13.835960] wireguard: Copyright (C) 2015-2019 Jason A. Donenfeld Jason@zx2c4.com. All Rights Reserved.
[ 13.849108] xt_time: kernel timezone is -0000
[ 13.878438] PPP generic driver version 2.4.2
[ 13.878942] NET: Registered protocol family 24
[ 13.894701] ath10k_pci 0000:01:00.0: assign IRQ: got 35
[ 13.894721] ath10k 5.1 driver, optimized for CT firmware, probing pci device: 0x46.
[ 13.895103] ath10k_pci 0000:01:00.0: enabling device (0140 -> 0142)
[ 13.901316] ath10k_pci 0000:01:00.0: enabling bus mastering
[ 13.901842] ath10k_pci 0000:01:00.0: pci irq msi oper_irq_mode 2 irq_mode 0 reset_mode 0
[ 14.586600] ath10k_pci 0000:01:00.0: qca9984/qca9994 hw1.0 target 0x01000000 chip_id 0x00000000 sub 168c:cafe
[ 14.586649] ath10k_pci 0000:01:00.0: kconfig debug 0 debugfs 1 tracing 0 dfs 1 testmode 0
[ 14.600184] ath10k_pci 0000:01:00.0: firmware ver 10.4b-ct-9984-fH-013-d81f62d97 api 5 features mfp,peer-flow-ctrl,txstatus-noack,wmi-10.x-CT,ratemask-CT,regdump-CT,txrate-CT,flush-all-CT,pingpong-CT,ch-regs-CT,nop-CT,htt-mgt-CT,set-special-CT,tx-rc-CT,cust-stats-CT,txrate2-CT,beacon-cb-CT,wmi-block-ack-CT,wmi-bcn-rc-CT crc32 5e71f3d8
[ 16.923270] ath10k_pci 0000:01:00.0: board_file api 2 bmi_id 0:1 crc32 85498734
[ 22.764887] ath10k_pci 0000:01:00.0: unsupported HTC service id: 1536
[ 22.765774] ath10k_pci 0000:01:00.0: 10.4 wmi init: vdevs: 16 peers: 48 tid: 96
[ 22.770383] ath10k_pci 0000:01:00.0: msdu-desc: 2500 skid: 32
[ 22.853278] ath10k_pci 0000:01:00.0: wmi print 'P 48/48 V 16 K 144 PH 176 T 186 msdu-desc: 2500 sw-crypt: 0 ct-sta: 0'
[ 22.854123] ath10k_pci 0000:01:00.0: wmi print 'free: 84872 iram: 13412 sram: 11224'
[ 23.143016] ath10k_pci 0000:01:00.0: htt-ver 2.2 wmi-op 6 htt-op 4 cal pre-cal-file max-sta 32 raw 0 hwcrypto 1
[ 23.238959] ath: EEPROM regdomain sanitized
[ 23.238979] ath: EEPROM regdomain: 0x64
[ 23.238989] ath: EEPROM indicates we should expect a direct regpair map
[ 23.239012] ath: Country alpha2 being used: 00
[ 23.239022] ath: Regpair used: 0x64
[ 23.247470] ath10k_pci 0001:01:00.0: assign IRQ: got 37
[ 23.247495] ath10k 5.1 driver, optimized for CT firmware, probing pci device: 0x46.
[ 23.248218] ath10k_pci 0001:01:00.0: enabling device (0140 -> 0142)
[ 23.254039] ath10k_pci 0001:01:00.0: enabling bus mastering
[ 23.254645] ath10k_pci 0001:01:00.0: pci irq msi oper_irq_mode 2 irq_mode 0 reset_mode 0
[ 23.569431] ath10k_pci 0001:01:00.0: qca9984/qca9994 hw1.0 target 0x01000000 chip_id 0x00000000 sub 168c:cafe
[ 23.569466] ath10k_pci 0001:01:00.0: kconfig debug 0 debugfs 1 tracing 0 dfs 1 testmode 0
[ 23.580837] ath10k_pci 0001:01:00.0: firmware ver 10.4b-ct-9984-fH-013-d81f62d97 api 5 features mfp,peer-flow-ctrl,txstatus-noack,wmi-10.x-CT,ratemask-CT,regdump-CT,txrate-CT,flush-all-CT,pingpong-CT,ch-regs-CT,nop-CT,htt-mgt-CT,set-special-CT,tx-rc-CT,cust-stats-CT,txrate2-CT,beacon-cb-CT,wmi-block-ack-CT,wmi-bcn-rc-CT crc32 5e71f3d8
[ 25.965788] ath10k_pci 0001:01:00.0: board_file api 2 bmi_id 0:2 crc32 85498734
[ 31.926889] ath10k_pci 0001:01:00.0: unsupported HTC service id: 1536
[ 31.927736] ath10k_pci 0001:01:00.0: 10.4 wmi init: vdevs: 16 peers: 48 tid: 96
[ 31.932304] ath10k_pci 0001:01:00.0: msdu-desc: 2500 skid: 32
[ 32.017922] ath10k_pci 0001:01:00.0: wmi print 'P 48/48 V 16 K 144 PH 176 T 186 msdu-desc: 2500 sw-crypt: 0 ct-sta: 0'
[ 32.018816] ath10k_pci 0001:01:00.0: wmi print 'free: 84872 iram: 13412 sram: 11224'
[ 32.400518] ath10k_pci 0001:01:00.0: htt-ver 2.2 wmi-op 6 htt-op 4 cal pre-cal-file max-sta 32 raw 0 hwcrypto 1
[ 32.489614] ath: EEPROM regdomain sanitized
[ 32.489634] ath: EEPROM regdomain: 0x64
[ 32.489645] ath: EEPROM indicates we should expect a direct regpair map
[ 32.489668] ath: Country alpha2 being used: 00
[ 32.489678] ath: Regpair used: 0x64
[ 32.501079] kmodloader: done loading kernel modules from /etc/modules.d/*
[ 37.152937] Alignment trap: not handling instruction f4410a1f at [<000847ec>]
[ 37.152961] 8<--- cut here ---
[ 37.159119] Unhandled fault: alignment exception (0x801) at 0x01559594
[ 37.161997] pgd = 651ef7ab
[ 37.168576] [01559594] *pgd=5dae4835, *pte=5ce8875f, *ppte=5ce88c7f
[ 37.267396] dwmac1000: Master AXI performs any burst length
[ 37.267427] ipq806x-gmac-dwmac 37400000.ethernet eth1: No Safety Features support found
[ 37.271872] ipq806x-gmac-dwmac 37400000.ethernet eth1: IEEE 1588-2008 Advanced Timestamp supported
[ 37.279913] ipq806x-gmac-dwmac 37400000.ethernet eth1: registered PTP clock
[ 37.288853] ipq806x-gmac-dwmac 37400000.ethernet eth1: configuring for fixed/sgmii link mode
[ 37.295795] ipq806x-gmac-dwmac 37400000.ethernet eth1: Link is Up - 1Gbps/Full - flow control off
[ 37.303777] br-lan: port 1(eth1.1) entered blocking state
[ 37.313165] br-lan: port 1(eth1.1) entered disabled state
[ 37.318698] device eth1.1 entered promiscuous mode
[ 37.323850] device eth1 entered promiscuous mode
[ 37.328816] IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
[ 37.336050] br-lan: port 1(eth1.1) entered blocking state
[ 37.339365] br-lan: port 1(eth1.1) entered forwarding state
[ 37.354176] dwmac1000: Master AXI performs any burst length
[ 37.354204] ipq806x-gmac-dwmac 37200000.ethernet eth0: No Safety Features support found
[ 37.358736] ipq806x-gmac-dwmac 37200000.ethernet eth0: IEEE 1588-2008 Advanced Timestamp supported
[ 37.366642] ipq806x-gmac-dwmac 37200000.ethernet eth0: registered PTP clock
[ 37.375640] ipq806x-gmac-dwmac 37200000.ethernet eth0: configuring for fixed/rgmii link mode
[ 37.383004] ipq806x-gmac-dwmac 37200000.ethernet eth0: Link is Up - 1Gbps/Full - flow control off
[ 37.391748] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 38.009405] pppoe-wan: renamed from ppp0
[ 38.220386] ath: EEPROM regdomain: 0x82d4
[ 38.220406] ath: EEPROM indicates we should expect a country code
[ 38.223369] ath: doing EEPROM country->regdmn map search
[ 38.229536] ath: country maps to regdmn code: 0x37
[ 38.234824] ath: Country alpha2 being used: ES
[ 38.239508] ath: Regpair used: 0x37
[ 38.243865] ath: regdomain 0x82d4 dynamically updated by user
[ 38.247258] ath: EEPROM regdomain: 0x82d4
[ 38.253222] ath: EEPROM indicates we should expect a country code
[ 38.257135] ath: doing EEPROM country->regdmn map search
[ 38.263284] ath: country maps to regdmn code: 0x37
[ 38.268657] ath: Country alpha2 being used: ES
[ 38.273192] ath: Regpair used: 0x37
[ 38.277623] ath: regdomain 0x82d4 dynamically updated by user
[ 38.338720] ath: EEPROM regdomain: 0x8348
[ 38.338739] ath: EEPROM indicates we should expect a country code
[ 38.341702] ath: doing EEPROM country->regdmn map search
[ 38.347781] ath: country maps to regdmn code: 0x3a
[ 38.353239] ath: Country alpha2 being used: US
[ 38.357816] ath: Regpair used: 0x3a
[ 38.362187] ath: regdomain 0x8348 dynamically updated by user
[ 38.365596] ath: EEPROM regdomain: 0x8348
[ 38.371530] ath: EEPROM indicates we should expect a country code
[ 38.375469] ath: doing EEPROM country->regdmn map search
[ 38.381626] ath: country maps to regdmn code: 0x3a
[ 38.386926] ath: Country alpha2 being used: US
[ 38.391586] ath: Regpair used: 0x3a
[ 38.395951] ath: regdomain 0x8348 dynamically updated by user
[ 38.401528] IPv6: ADDRCONF(NETDEV_CHANGE): br-lan: link becomes ready
[ 45.445311] ath10k_pci 0001:01:00.0: unsupported HTC service id: 1536
[ 45.445523] ath10k_pci 0001:01:00.0: 10.4 wmi init: vdevs: 16 peers: 48 tid: 96
[ 45.450813] ath10k_pci 0001:01:00.0: msdu-desc: 2500 skid: 32
[ 45.536265] ath10k_pci 0001:01:00.0: wmi print 'P 48/48 V 16 K 144 PH 176 T 186 msdu-desc: 2500 sw-crypt: 0 ct-sta: 0'
[ 45.537153] ath10k_pci 0001:01:00.0: wmi print 'free: 84872 iram: 13412 sram: 11224'
[ 46.077345] ath10k_pci 0001:01:00.0: Firmware lacks feature flag indicating a retry limit of > 2 is OK, requested limit: 4
[ 46.086199] Alignment trap: not handling instruction f4410a1f at [<000847ec>]
[ 46.087292] 8<--- cut here ---
[ 46.094611] Unhandled fault: alignment exception (0x801) at 0x01a5a264
[ 46.097449] pgd = 7d425fb1
[ 46.104035] [01a5a264] *pgd=5d7b7835, *pte=5ca0175f, *ppte=5ca01c7f
[ 46.123943] br-lan: port 2(wlan1) entered blocking state
[ 46.123966] br-lan: port 2(wlan1) entered disabled state
[ 46.128620] device wlan1 entered promiscuous mode
[ 46.299909] ath10k_pci 0001:01:00.0: NOTE: Firmware DBGLOG output disabled in debug_mask: 0x10000000
[ 52.074815] ath10k_pci 0000:01:00.0: unsupported HTC service id: 1536
[ 52.075005] ath10k_pci 0000:01:00.0: 10.4 wmi init: vdevs: 16 peers: 48 tid: 96
[ 52.080305] ath10k_pci 0000:01:00.0: msdu-desc: 2500 skid: 32
[ 52.163253] ath10k_pci 0000:01:00.0: wmi print 'P 48/48 V 16 K 144 PH 176 T 186 msdu-desc: 2500 sw-crypt: 0 ct-sta: 0'
[ 52.164139] ath10k_pci 0000:01:00.0: wmi print 'free: 84872 iram: 13412 sram: 11224'
[ 52.550134] ath10k_pci 0000:01:00.0: Firmware lacks feature flag indicating a retry limit of > 2 is OK, requested limit: 4
[ 52.557649] br-lan: port 3(wlan0) entered blocking state
[ 52.560295] br-lan: port 3(wlan0) entered disabled state
[ 52.566172] device wlan0 entered promiscuous mode
[ 52.571247] br-lan: port 3(wlan0) entered blocking state
[ 52.575456] br-lan: port 3(wlan0) entered forwarding state
[ 52.591728] br-lan: port 3(wlan0) entered disabled state
[ 52.592799] Alignment trap: not handling instruction f4410a1f at [<000847ec>]
[ 52.596110] 8<--- cut here ---
[ 52.603242] Unhandled fault: alignment exception (0x801) at 0x01bc62e4
[ 52.606082] pgd = 86e3b05f
[ 52.612661] [01bc62e4] *pgd=5bcc5835, *pte=5ce4875f, *ppte=5ce48c7f
[ 52.638123] ath: EEPROM regdomain: 0x82d4
[ 52.638142] ath: EEPROM indicates we should expect a country code
[ 52.641103] ath: doing EEPROM country->regdmn map search
[ 52.647182] ath: country maps to regdmn code: 0x37
[ 52.652660] ath: Country alpha2 being used: ES
[ 52.657164] ath: Regpair used: 0x37
[ 52.661679] ath: regdomain 0x82d4 dynamically updated by user
[ 52.665059] ath: EEPROM regdomain: 0x82d4
[ 52.670969] ath: EEPROM indicates we should expect a country code
[ 52.674873] ath: doing EEPROM country->regdmn map search
[ 52.681023] ath: country maps to regdmn code: 0x37
[ 52.686328] ath: Country alpha2 being used: ES
[ 52.691008] ath: Regpair used: 0x37
[ 52.695357] ath: regdomain 0x82d4 dynamically updated by user
[ 57.763032] Alignment trap: not handling instruction f4410a1f at [<000847ec>]
[ 57.763083] 8<--- cut here ---
[ 57.769331] Unhandled fault: alignment exception (0x801) at 0x01149304
[ 57.772119] pgd = 14e00733
[ 57.778718] [01149304] *pgd=5d912835, *pte=5cc3c75f, *ppte=5cc3cc7f
[ 61.286218] IPv6: ADDRCONF(NETDEV_CHANGE): wlan1: link becomes ready
[ 61.286646] br-lan: port 2(wlan1) entered blocking state
[ 61.291784] br-lan: port 2(wlan1) entered forwarding state
[ 62.892597] Alignment trap: not handling instruction f4410a1f at [<000847ec>]
[ 62.892649] 8<--- cut here ---
[ 62.898868] Unhandled fault: alignment exception (0x801) at 0x01f27384
[ 62.901683] pgd = 6ad7711d
[ 62.908316] [01f27384] *pgd=5bade835, *pte=5c95e75f, *ppte=5c95ec7f
[ 63.282491] ath10k_pci 0001:01:00.0: Invalid peer id 0 or peer stats buffer, peer: a5e6e0b2 sta: 19341bd9
[ 68.024534] Alignment trap: not handling instruction f4410a1f at [<000847ec>]
[ 68.024581] 8<--- cut here ---
[ 68.030891] Unhandled fault: alignment exception (0x801) at 0x01580384
[ 68.033621] pgd = 9bca4f46
[ 68.040260] [01580384] *pgd=5d7c2835, *pte=5cfa775f, *ppte=5cfa7c7f
[ 111.787534] ath10k_pci 0001:01:00.0: Invalid VHT mcs 15 peer stats
[ 115.687531] ath10k_pci 0000:01:00.0: mac flush null vif, drop 0 queues 0xffff
[ 115.718101] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 115.718254] br-lan: port 3(wlan0) entered blocking state
[ 115.723523] br-lan: port 3(wlan0) entered forwarding state
[ 200.884296] ath10k_pci 0001:01:00.0: htt tx: fixing invalid VHT TX rate code 0xff

The device appears to work normally, but it's quite strange that only one of them is showing these exceptions...

Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment
Labels
Projects
None yet
Development

No branches or pull requests

1 participant