You signed in with another tab or window. Reload to refresh your session.You signed out in another tab or window. Reload to refresh your session.You switched accounts on another tab or window. Reload to refresh your session.Dismiss alert
I was trying to build a wireless mesh network, and I found that 2.4GHz is working fine but 5GHz is somehow not working.
After some googleing, I've replace the default ath10k driver(ath10k-firmware-qca988x-ct) with another one(ath10k-firmware-qca988x) and 5GHz mesh is up, every things else looks fine, except some error report in dmesg.
error log in demsg:
[ 22.308396] pci 0000:00:00.0: using irq 40 for pin 1
[ 22.313487] ath10k 4.19 driver, optimized for CT firmware, probing pci device: 0x3c.
[ 22.377475] PCI: Enabling device 0000:00:00.0 (0000 -> 0002)
[ 22.385528] ath10k_pci 0000:00:00.0: pci irq legacy oper_irq_mode 1 irq_mode 0 reset_mode 0
[ 22.712011] ath10k_pci 0000:00:00.0: Direct firmware load for ath10k/fwcfg-pci-0000:00:00.0.txt failed with error -2
[ 22.722718] ath10k_pci 0000:00:00.0: Falling back to user helper
[ 22.877000] firmware ath10k!fwcfg-pci-0000:00:00.0.txt: firmware_loading_store: map pages failed
[ 22.886238] ath10k_pci 0000:00:00.0: Direct firmware load for ath10k/pre-cal-pci-0000:00:00.0.bin failed with error -2
[ 22.897128] ath10k_pci 0000:00:00.0: Falling back to user helper
[ 23.202564] firmware ath10k!pre-cal-pci-0000:00:00.0.bin: firmware_loading_store: map pages failed
[ 23.211942] ath10k_pci 0000:00:00.0: Direct firmware load for ath10k/cal-pci-0000:00:00.0.bin failed with error -2
[ 23.222465] ath10k_pci 0000:00:00.0: Falling back to user helper
[ 23.517153] firmware ath10k!cal-pci-0000:00:00.0.bin: firmware_loading_store: map pages failed
[ 23.526391] ath10k_pci 0000:00:00.0: Direct firmware load for ath10k/QCA988X/hw2.0/ct-firmware-5.bin failed with error -2
[ 23.537543] ath10k_pci 0000:00:00.0: Falling back to user helper
[ 23.837096] firmware ath10k!QCA988X!hw2.0!ct-firmware-5.bin: firmware_loading_store: map pages failed
[ 23.846746] ath10k_pci 0000:00:00.0: Direct firmware load for ath10k/QCA988X/hw2.0/ct-firmware-2.bin failed with error -2
[ 23.857891] ath10k_pci 0000:00:00.0: Falling back to user helper
[ 24.018418] firmware ath10k!QCA988X!hw2.0!ct-firmware-2.bin: firmware_loading_store: map pages failed
[ 24.028068] ath10k_pci 0000:00:00.0: Direct firmware load for ath10k/QCA988X/hw2.0/firmware-6.bin failed with error -2
[ 24.038950] ath10k_pci 0000:00:00.0: Falling back to user helper
[ 24.184641] firmware ath10k!QCA988X!hw2.0!firmware-6.bin: firmware_loading_store: map pages failed
[ 24.205793] ath10k_pci 0000:00:00.0: qca988x hw2.0 target 0x4100016c chip_id 0x043202ff sub 0000:0000
[ 24.215218] ath10k_pci 0000:00:00.0: kconfig debug 0 debugfs 1 tracing 0 dfs 1 testmode 0
[ 24.228328] ath10k_pci 0000:00:00.0: firmware ver 10.2.4-1.0-00047 api 5 features no-p2p,raw-mode,mfp,allows-mesh-bcast crc32 35bd9258
[ 24.319667] ath10k_pci 0000:00:00.0: Direct firmware load for ath10k/QCA988X/hw2.0/board-2.bin failed with error -2
[ 24.330302] ath10k_pci 0000:00:00.0: Falling back to user helper
[ 24.412910] firmware ath10k!QCA988X!hw2.0!board-2.bin: firmware_loading_store: map pages failed
[ 24.423729] ath10k_pci 0000:00:00.0: board_file api 1 bmi_id N/A crc32 bebc7c08
[ 25.585033] ath10k_pci 0000:00:00.0: wmi print 'P 135 V 16 T 433'
[ 25.595888] ath10k_pci 0000:00:00.0: htt-ver 2.1 wmi-op 5 htt-op 2 cal otp max-sta 128 raw 0 hwcrypto 1
[ 25.735217] ath: EEPROM regdomain: 0x0
[ 25.735224] ath: EEPROM indicates default country code should be used
[ 25.735227] ath: doing EEPROM country->regdmn map search
[ 25.735240] ath: country maps to regdmn code: 0x3a
[ 25.735245] ath: Country alpha2 being used: US
[ 25.735249] ath: Regpair used: 0x3a
[ 25.798163] ath: EEPROM regdomain: 0x0
[ 25.798170] ath: EEPROM indicates default country code should be used
[ 25.798174] ath: doing EEPROM country->regdmn map search
[ 25.798187] ath: country maps to regdmn code: 0x3a
[ 25.798191] ath: Country alpha2 being used: US
[ 25.798195] ath: Regpair used: 0x3a
[ 25.816062] ieee80211 phy1: Selected rate control algorithm 'minstrel_ht'
[ 25.817812] ieee80211 phy1: Atheros AR9550 Rev:0 mem=0xb8100000, irq=47
The text was updated successfully, but these errors were encountered:
0pera:
Supply the following if possible:
Belkin AC1750DB (f9k1115v2)
OpenWrt 19.07.0 - OpenWrt 19.07.3
ath10k-firmware-qca988x-ct
I was trying to build a wireless mesh network, and I found that 2.4GHz is working fine but 5GHz is somehow not working.
After some googleing, I've replace the default ath10k driver(ath10k-firmware-qca988x-ct) with another one(ath10k-firmware-qca988x) and 5GHz mesh is up, every things else looks fine, except some error report in dmesg.
error log in demsg:
[ 22.308396] pci 0000:00:00.0: using irq 40 for pin 1
[ 22.313487] ath10k 4.19 driver, optimized for CT firmware, probing pci device: 0x3c.
[ 22.377475] PCI: Enabling device 0000:00:00.0 (0000 -> 0002)
[ 22.385528] ath10k_pci 0000:00:00.0: pci irq legacy oper_irq_mode 1 irq_mode 0 reset_mode 0
[ 22.712011] ath10k_pci 0000:00:00.0: Direct firmware load for ath10k/fwcfg-pci-0000:00:00.0.txt failed with error -2
[ 22.722718] ath10k_pci 0000:00:00.0: Falling back to user helper
[ 22.877000] firmware ath10k!fwcfg-pci-0000:00:00.0.txt: firmware_loading_store: map pages failed
[ 22.886238] ath10k_pci 0000:00:00.0: Direct firmware load for ath10k/pre-cal-pci-0000:00:00.0.bin failed with error -2
[ 22.897128] ath10k_pci 0000:00:00.0: Falling back to user helper
[ 23.202564] firmware ath10k!pre-cal-pci-0000:00:00.0.bin: firmware_loading_store: map pages failed
[ 23.211942] ath10k_pci 0000:00:00.0: Direct firmware load for ath10k/cal-pci-0000:00:00.0.bin failed with error -2
[ 23.222465] ath10k_pci 0000:00:00.0: Falling back to user helper
[ 23.517153] firmware ath10k!cal-pci-0000:00:00.0.bin: firmware_loading_store: map pages failed
[ 23.526391] ath10k_pci 0000:00:00.0: Direct firmware load for ath10k/QCA988X/hw2.0/ct-firmware-5.bin failed with error -2
[ 23.537543] ath10k_pci 0000:00:00.0: Falling back to user helper
[ 23.837096] firmware ath10k!QCA988X!hw2.0!ct-firmware-5.bin: firmware_loading_store: map pages failed
[ 23.846746] ath10k_pci 0000:00:00.0: Direct firmware load for ath10k/QCA988X/hw2.0/ct-firmware-2.bin failed with error -2
[ 23.857891] ath10k_pci 0000:00:00.0: Falling back to user helper
[ 24.018418] firmware ath10k!QCA988X!hw2.0!ct-firmware-2.bin: firmware_loading_store: map pages failed
[ 24.028068] ath10k_pci 0000:00:00.0: Direct firmware load for ath10k/QCA988X/hw2.0/firmware-6.bin failed with error -2
[ 24.038950] ath10k_pci 0000:00:00.0: Falling back to user helper
[ 24.184641] firmware ath10k!QCA988X!hw2.0!firmware-6.bin: firmware_loading_store: map pages failed
[ 24.205793] ath10k_pci 0000:00:00.0: qca988x hw2.0 target 0x4100016c chip_id 0x043202ff sub 0000:0000
[ 24.215218] ath10k_pci 0000:00:00.0: kconfig debug 0 debugfs 1 tracing 0 dfs 1 testmode 0
[ 24.228328] ath10k_pci 0000:00:00.0: firmware ver 10.2.4-1.0-00047 api 5 features no-p2p,raw-mode,mfp,allows-mesh-bcast crc32 35bd9258
[ 24.319667] ath10k_pci 0000:00:00.0: Direct firmware load for ath10k/QCA988X/hw2.0/board-2.bin failed with error -2
[ 24.330302] ath10k_pci 0000:00:00.0: Falling back to user helper
[ 24.412910] firmware ath10k!QCA988X!hw2.0!board-2.bin: firmware_loading_store: map pages failed
[ 24.423729] ath10k_pci 0000:00:00.0: board_file api 1 bmi_id N/A crc32 bebc7c08
[ 25.585033] ath10k_pci 0000:00:00.0: wmi print 'P 135 V 16 T 433'
[ 25.595888] ath10k_pci 0000:00:00.0: htt-ver 2.1 wmi-op 5 htt-op 2 cal otp max-sta 128 raw 0 hwcrypto 1
[ 25.735217] ath: EEPROM regdomain: 0x0
[ 25.735224] ath: EEPROM indicates default country code should be used
[ 25.735227] ath: doing EEPROM country->regdmn map search
[ 25.735240] ath: country maps to regdmn code: 0x3a
[ 25.735245] ath: Country alpha2 being used: US
[ 25.735249] ath: Regpair used: 0x3a
[ 25.798163] ath: EEPROM regdomain: 0x0
[ 25.798170] ath: EEPROM indicates default country code should be used
[ 25.798174] ath: doing EEPROM country->regdmn map search
[ 25.798187] ath: country maps to regdmn code: 0x3a
[ 25.798191] ath: Country alpha2 being used: US
[ 25.798195] ath: Regpair used: 0x3a
[ 25.816062] ieee80211 phy1: Selected rate control algorithm 'minstrel_ht'
[ 25.817812] ieee80211 phy1: Atheros AR9550 Rev:0 mem=0xb8100000, irq=47
The text was updated successfully, but these errors were encountered: