Skip to content
New issue

Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.

By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.

Already on GitHub? Sign in to your account

FS#3093 - RAMIPS/MT7621: 2,4 GHz radio not recognised in master. #7862

Closed
openwrt-bot opened this issue May 12, 2020 · 4 comments
Closed

FS#3093 - RAMIPS/MT7621: 2,4 GHz radio not recognised in master. #7862

openwrt-bot opened this issue May 12, 2020 · 4 comments
Labels

Comments

@openwrt-bot
Copy link

Borromini:

OpenWrt master r13212-300b7fe85a does not recognise the 2,4 GHz radio on the DIR-860L B1.

After a 'wifi config' only the 5 GHz radio is shown:

# cat /etc/config/wireless

config wifi-device 'radio0'
option type 'mac80211'
option channel '36'
option hwmode '11a'
option path '1e140000.pcie/pci0000:00r13212-300b7fe85a/0000:00:00.0/0000:01:00.0'
option htmode 'VHT80'
option disabled '1'

config wifi-iface 'default_radio0'
option device 'radio0'
option network 'lan'
option mode 'ap'
option ssid 'OpenWrt'
option encryption 'none'

Installed packages:

# opkg list-installed|grep kmod-mt76
kmod-mt76-core - 5.4.39+2020-04-27-5f3ccc72-2
kmod-mt76x02-common - 5.4.39+2020-04-27-5f3ccc72-2
kmod-mt76x2 - 5.4.39+2020-04-27-5f3ccc72-2
kmod-mt76x2-common - 5.4.39+2020-04-27-5f3ccc72-2

@openwrt-bot
Copy link
Author

Borromini:

Great, so I forgot to add the router to the title and I cannot change that anymore.

Dmesg for completeness, it's not showing anything weird AFAICT:

[ 0.000000] Linux version 5.4.40 (1800x@crunchbot) (gcc version 8.4.0 (OpenWrt GCC 8.4.0 r13208+10-426fb8cf84)) #0 SMP Tue May 12 12:57:40 2020
[ 0.000000] SoC Type: MediaTek MT7621 ver:1 eco:3
[ 0.000000] printk: bootconsole [early0] enabled
[ 0.000000] CPU0 revision is: 0001992f (MIPS 1004Kc)
[ 0.000000] MIPS: machine is D-Link DIR-860L B1
[ 0.000000] Initrd not found or empty - disabling initrd
[ 0.000000] VPE topology {2,2} total 4
[ 0.000000] Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes.
[ 0.000000] Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes
[ 0.000000] MIPS secondary cache 256kB, 8-way, linesize 32 bytes.
[ 0.000000] Zone ranges:
[ 0.000000] Normal [mem 0x0000000000000000-0x0000000007ffffff]
[ 0.000000] HighMem empty
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000000000-0x0000000007ffffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x0000000007ffffff]
[ 0.000000] On node 0 totalpages: 32768
[ 0.000000] Normal zone: 288 pages used for memmap
[ 0.000000] Normal zone: 0 pages reserved
[ 0.000000] Normal zone: 32768 pages, LIFO batch:7
[ 0.000000] percpu: Embedded 14 pages/cpu s26672 r8192 d22480 u57344
[ 0.000000] pcpu-alloc: s26672 r8192 d22480 u57344 alloc=144096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 32480
[ 0.000000] Kernel command line: console=ttyS0,57600 rootfstype=squashfs,jffs2
[ 0.000000] Dentry cache hash table entries: 16384 (order: 4, 65536 bytes, linear)
[ 0.000000] Inode-cache hash table entries: 8192 (order: 3, 32768 bytes, linear)
[ 0.000000] Writing ErrCtl register=00000041
[ 0.000000] Readback ErrCtl register=00000041
[ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
[ 0.000000] Memory: 121552K/131072K available (5574K kernel code, 202K rwdata, 704K rodata, 1252K init, 230K bss, 9520K reserved, 0K cma-reserved, 0K highmem)
[ 0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] rcu: Hierarchical RCU implementation.
[ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
[ 0.000000] NR_IRQS: 256
[ 0.000000] random: get_random_bytes called from 0x80657a10 with crng_init=0
[ 0.000000] CPU Clock: 880MHz
[ 0.000000] clocksource: GIC: mask: 0xffffffffffffffff max_cycles: 0xcaf478abb4, max_idle_ns: 440795247997 ns
[ 0.000000] clocksource: MIPS: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 4343773742 ns
[ 0.000008] sched_clock: 32 bits at 440MHz, resolution 2ns, wraps every 4880645118ns
[ 0.015474] Calibrating delay loop... 583.68 BogoMIPS (lpj=1167360)
[ 0.055826] pid_max: default: 32768 minimum: 301
[ 0.065165] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linear)
[ 0.079571] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear)
[ 0.097617] rcu: Hierarchical SRCU implementation.
[ 0.107713] smp: Bringing up secondary CPUs ...
[ 9.721360] Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes.
[ 9.721370] Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes
[ 9.721381] MIPS secondary cache 256kB, 8-way, linesize 32 bytes.
[ 9.721480] CPU1 revision is: 0001992f (MIPS 1004Kc)
[ 0.144887] Synchronize counters for CPU 1: done.
[ 0.055662] Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes.
[ 0.055670] Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes
[ 0.055678] MIPS secondary cache 256kB, 8-way, linesize 32 bytes.
[ 0.055735] CPU2 revision is: 0001992f (MIPS 1004Kc)
[ 0.239309] Synchronize counters for CPU 2: done.
[ 0.142193] Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes.
[ 0.142201] Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes
[ 0.142208] MIPS secondary cache 256kB, 8-way, linesize 32 bytes.
[ 0.142265] CPU3 revision is: 0001992f (MIPS 1004Kc)
[ 0.326900] Synchronize counters for CPU 3: done.
[ 0.386502] smp: Brought up 1 node, 4 CPUs
[ 0.398730] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[ 0.418015] futex hash table entries: 1024 (order: 3, 32768 bytes, linear)
[ 0.431947] pinctrl core: initialized pinctrl subsystem
[ 0.443679] NET: Registered protocol family 16
[ 0.458510] FPU Affinity set after 4688 emulations
[ 0.473887] random: fast init done
[ 0.485356] clocksource: Switched to clocksource GIC
[ 0.497118] NET: Registered protocol family 2
[ 0.506389] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes, linear)
[ 0.522915] TCP established hash table entries: 1024 (order: 0, 4096 bytes, linear)
[ 0.538111] TCP bind hash table entries: 1024 (order: 1, 8192 bytes, linear)
[ 0.552093] TCP: Hash tables configured (established 1024 bind 1024)
[ 0.564828] UDP hash table entries: 256 (order: 1, 8192 bytes, linear)
[ 0.577725] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear)
[ 0.591767] NET: Registered protocol family 1
[ 0.600341] PCI: CLS 0 bytes, default 32
[ 0.697334] 4 CPUs re-calibrate udelay(lpj = 1163264)
[ 0.708846] workingset: timestamp_bits=14 max_order=15 bucket_order=1
[ 0.732878] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 0.744362] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
[ 0.766471] mt7621_gpio 1e000600.gpio: registering 32 gpios
[ 0.777825] mt7621_gpio 1e000600.gpio: registering 32 gpios
[ 0.789085] mt7621_gpio 1e000600.gpio: registering 32 gpios
[ 0.800918] Serial: 8250/16550 driver, 3 ports, IRQ sharing disabled
[ 0.814802] printk: console [ttyS0] disabled
[ 0.823257] 1e000c00.uartlite: ttyS0 at MMIO 0x1e000c00 (irq = 19, base_baud = 3125000) is a 16550A
[ 0.841181] printk: console [ttyS0] enabled
[ 0.857737] printk: bootconsole [early0] disabled
[ 0.879178] spi-mt7621 1e000b00.spi: sys_freq: 220000000
[ 0.890857] spi-nor spi0.0: mx25l12805d (16384 Kbytes)
[ 0.901206] 6 fixed-partitions partitions found on MTD device spi0.0
[ 0.913904] Creating 6 MTD partitions on "spi0.0":
[ 0.923463] 0x000000000000-0x000000030000 : "u-boot"
[ 0.934701] 0x000000030000-0x000000034000 : "u-boot-env"
[ 0.946551] 0x000000034000-0x000000038000 : "radio"
[ 0.957568] 0x000000038000-0x000000040000 : "factory"
[ 0.968879] 0x000000040000-0x000000050000 : "defaults"
[ 0.980378] 0x000000050000-0x000001000000 : "firmware"
[ 0.992458] 2 seama-fw partitions found on MTD device firmware
[ 1.004105] Creating 2 MTD partitions on "firmware":
[ 1.014006] 0x000000000040-0x000000220000 : "kernel"
[ 1.025039] 0x000000220000-0x000000fb0000 : "rootfs"
[ 1.035949] mtd: device 7 (rootfs) set to be root filesystem
[ 1.047419] 1 squashfs-split partitions found on MTD device rootfs
[ 1.059763] 0x000000890000-0x000000fb0000 : "rootfs_data"
[ 1.072658] libphy: Fixed MDIO Bus: probed
[ 1.107723] libphy: mdio: probed
[ 1.114392] mt7530 mdio-bus:1f: MT7530 adapts as multi-chip module
[ 1.127694] mtk_soc_eth 1e100000.ethernet eth0: mediatek frame engine at 0xbe100000, irq 21
[ 1.146383] mt7621-pci 1e140000.pcie: Parsing DT failed
[ 1.159315] NET: Registered protocol family 10
[ 1.169942] Segment Routing with IPv6
[ 1.177402] NET: Registered protocol family 17
[ 1.186583] 8021q: 802.1Q VLAN Support v1.8
[ 1.196740] mt7530 mdio-bus:1f: MT7530 adapts as multi-chip module
[ 2.093719] libphy: dsa slave smi: probed
[ 2.113422] mt7530 mdio-bus:1f wan (uninitialized): PHY [dsa-0.0:00] driver [Generic PHY]
[ 2.145413] mt7530 mdio-bus:1f lan4 (uninitialized): PHY [dsa-0.0:01] driver [Generic PHY]
[ 2.177412] mt7530 mdio-bus:1f lan3 (uninitialized): PHY [dsa-0.0:02] driver [Generic PHY]
[ 2.209402] mt7530 mdio-bus:1f lan2 (uninitialized): PHY [dsa-0.0:03] driver [Generic PHY]
[ 2.241413] mt7530 mdio-bus:1f lan1 (uninitialized): PHY [dsa-0.0:04] driver [Generic PHY]
[ 2.305356] mt7530 mdio-bus:1f: configuring for fixed/rgmii link mode
[ 2.929351] mt7530 mdio-bus:1f: Link is Up - 1Gbps/Full - flow control off
[ 3.013392] DSA: tree 0 setup
[ 3.019644] rt2880-pinmux pinctrl: pcie is already enabled
[ 3.030594] mt7621-pci 1e140000.pcie: Error applying setting, reverse things back
[ 3.045653] mt7621-pci-phy 1e149000.pcie-phy: PHY for 0xbe149000 (dual port = 1)
[ 3.060571] mt7621-pci-phy 1e14a000.pcie-phy: PHY for 0xbe14a000 (dual port = 0)
[ 3.175041] mt7621-pci-phy 1e149000.pcie-phy: Xtal is 40MHz
[ 3.186157] mt7621-pci-phy 1e14a000.pcie-phy: Xtal is 40MHz
[ 3.296910] mt7621-pci 1e140000.pcie: pcie1 no card, disable it (RST & CLK)
[ 3.310779] mt7621-pci 1e140000.pcie: pcie2 no card, disable it (RST & CLK)
[ 3.324649] mt7621-pci 1e140000.pcie: PCIE0 enabled
[ 3.334372] mt7621-pci 1e140000.pcie: PCI coherence region base: 0x60000000, mask/settings: 0xf0000002
[ 3.353094] mt7621-pci 1e140000.pcie: PCI host bridge to bus 0000:00
[ 3.365783] pci_bus 0000:00: root bus resource [io 0x1e160000-0x1e16ffff]
[ 3.379480] pci_bus 0000:00: root bus resource [mem 0x60000000-0x6fffffff]
[ 3.393182] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 3.404152] pci 0000:00:00.0: [0e8d:0801] type 01 class 0x060400
[ 3.416151] pci 0000:00:00.0: reg 0x10: [mem 0x00000000-0x7fffffff]
[ 3.428642] pci 0000:00:00.0: reg 0x14: [mem 0x60200000-0x6020ffff]
[ 3.441196] pci 0000:00:00.0: supports D1
[ 3.449184] pci 0000:00:00.0: PME# supported from D0 D1 D3hot
[ 3.462231] pci 0000:01:00.0: [14c3:7662] type 00 class 0x028000
[ 3.474272] pci 0000:01:00.0: reg 0x10: [mem 0x00000000-0x000fffff 64bit]
[ 3.487834] pci 0000:01:00.0: reg 0x30: [mem 0x00000000-0x0000ffff pref]
[ 3.501288] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold
[ 3.514715] pci 0000:00:00.0: PCI bridge to [bus 01-ff]
[ 3.525149] pci 0000:00:00.0: bridge window [io 0x0000-0x0fff]
[ 3.537291] pci 0000:00:00.0: bridge window [mem 0x60000000-0x600fffff]
[ 3.550819] pci 0000:00:00.0: bridge window [mem 0x60100000-0x601fffff pref]
[ 3.565210] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01
[ 3.578427] pci 0000:00:00.0: BAR 0: no space for [mem size 0x80000000]
[ 3.591603] pci 0000:00:00.0: BAR 0: failed to assign [mem size 0x80000000]
[ 3.605480] pci 0000:00:00.0: BAR 8: assigned [mem 0x60000000-0x600fffff]
[ 3.619005] pci 0000:00:00.0: BAR 9: assigned [mem 0x60100000-0x601fffff pref]
[ 3.633398] pci 0000:00:00.0: BAR 1: assigned [mem 0x60200000-0x6020ffff]
[ 3.646927] pci 0000:00:00.0: BAR 7: assigned [io 0x1e160000-0x1e160fff]
[ 3.660464] pci 0000:01:00.0: BAR 0: assigned [mem 0x60000000-0x600fffff 64bit]
[ 3.675041] pci 0000:01:00.0: BAR 6: assigned [mem 0x60100000-0x6010ffff pref]
[ 3.689433] pci 0000:00:00.0: PCI bridge to [bus 01]
[ 3.699324] pci 0000:00:00.0: bridge window [io 0x1e160000-0x1e160fff]
[ 3.712848] pci 0000:00:00.0: bridge window [mem 0x60000000-0x600fffff]
[ 3.726375] pci 0000:00:00.0: bridge window [mem 0x60100000-0x601fffff pref]
[ 3.741543] hctosys: unable to open rtc device (rtc0)
[ 3.757471] VFS: Mounted root (squashfs filesystem) readonly on device 31:7.
[ 3.775654] Freeing unused kernel memory: 1252K
[ 3.784719] This architecture does not have kernel memory protection.
[ 3.797555] Run /sbin/init as init process
[ 4.766201] init: Console is alive
[ 4.773205] init: - watchdog -
[ 6.351319] kmodloader: loading kernel modules from /etc/modules-boot.d/

[ 6.568716] usbcore: registered new interface driver usbfs
[ 6.579805] usbcore: registered new interface driver hub
[ 6.590570] usbcore: registered new device driver usb
[ 6.610210] xhci-mtk 1e1c0000.xhci: 1e1c0000.xhci supply vbus not found, using dummy regulator
[ 6.627563] xhci-mtk 1e1c0000.xhci: 1e1c0000.xhci supply vusb33 not found, using dummy regulator
[ 6.645255] xhci-mtk 1e1c0000.xhci: xHCI Host Controller
[ 6.655884] xhci-mtk 1e1c0000.xhci: new USB bus registered, assigned bus number 1
[ 6.677501] xhci-mtk 1e1c0000.xhci: hcc params 0x01401198 hci version 0x96 quirks 0x0000000000210010
[ 6.695800] xhci-mtk 1e1c0000.xhci: irq 20, io mem 0x1e1c0000
[ 6.708537] hub 1-0:1.0: USB hub found
[ 6.716169] hub 1-0:1.0: 2 ports detected
[ 6.724830] xhci-mtk 1e1c0000.xhci: xHCI Host Controller
[ 6.735503] xhci-mtk 1e1c0000.xhci: new USB bus registered, assigned bus number 2
[ 6.750429] xhci-mtk 1e1c0000.xhci: Host supports USB 3.0 SuperSpeed
[ 6.763301] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
[ 6.780330] hub 2-0:1.0: USB hub found
[ 6.787920] hub 2-0:1.0: 1 port detected
[ 6.801076] kmodloader: done loading kernel modules from /etc/modules-boot.d/*
[ 6.829714] init: - preinit -
[ 7.713951] mtk_soc_eth 1e100000.ethernet eth0: configuring for fixed/rgmii link mode
[ 7.730034] mtk_soc_eth 1e100000.ethernet eth0: Link is Up - 1Gbps/Full - flow control rx/tx
[ 7.747348] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 7.990130] random: jshn: uninitialized urandom read (4 bytes read)
[ 8.056626] random: jshn: uninitialized urandom read (4 bytes read)
[ 8.243998] random: jshn: uninitialized urandom read (4 bytes read)
[ 8.633374] mt7530 mdio-bus:1f lan1: configuring for phy/gmii link mode
[ 8.673484] 8021q: adding VLAN 0 to HW filter on device lan1
[ 12.925443] mt7530 mdio-bus:1f lan1: Link is Up - 1Gbps/Full - flow control rx/tx
[ 12.940449] IPv6: ADDRCONF(NETDEV_CHANGE): lan1: link becomes ready
[ 12.956338] mount_root: jffs2 not ready yet, using temporary tmpfs overlay
[ 13.000546] urandom-seed: Seed file not found (/etc/urandom.seed)
[ 13.153363] mt7530 mdio-bus:1f lan1: Link is Down
[ 13.241664] procd: - early -
[ 13.247514] procd: - watchdog -
[ 13.837531] procd: - watchdog -
[ 13.844110] procd: - ubus -
[ 13.940207] urandom_read: 5 callbacks suppressed
[ 13.940219] random: ubusd: uninitialized urandom read (4 bytes read)
[ 14.034486] random: ubusd: uninitialized urandom read (4 bytes read)
[ 14.048478] procd: - init -
[ 14.621308] kmodloader: loading kernel modules from /etc/modules.d/*
[ 14.746989] Mirror/redirect action on
[ 14.762489] u32 classifier
[ 14.767907] input device check on
[ 14.775198] Actions configured
[ 14.791279] Loading modules backported from Linux version v5.7-rc3-0-g6a8b55ed4056
[ 14.791807] urngd: v1.0.2 started.
[ 14.806424] Backport generated by backports.git v5.7-rc3-1-0-gc0c7d2bb
[ 14.847900] wireguard: WireGuard 1.0.20200506 loaded. See www.wireguard.com for information.
[ 14.864808] wireguard: Copyright (C) 2015-2019 Jason A. Donenfeld Jason@zx2c4.com. All Rights Reserved.
[ 14.902233] xt_time: kernel timezone is -0000
[ 14.912454] usbcore: registered new interface driver cdc_ether
[ 14.956920] random: crng init done
[ 14.996718] mt7621-pci 1e140000.pcie: bus=1 slot=0 irq=23
[ 15.007561] pci 0000:00:00.0: enabling device (0006 -> 0007)
[ 15.018896] mt76x2e 0000:01:00.0: enabling device (0000 -> 0002)
[ 15.031163] mt76x2e 0000:01:00.0: ASIC revision: 76120044
[ 15.438032] mt76x2e 0000:01:00.0: ROM patch build: 20141115060606a
[ 15.453971] mt76x2e 0000:01:00.0: Firmware Version: 0.0.00
[ 15.464917] mt76x2e 0000:01:00.0: Build: 1
[ 15.473069] mt76x2e 0000:01:00.0: Build Time: 201507311614____
[ 15.501372] mt76x2e 0000:01:00.0: Firmware running!
[ 15.512723] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[ 15.541025] PPP generic driver version 2.4.2
[ 15.551395] NET: Registered protocol family 24
[ 15.562267] usbcore: registered new interface driver rndis_host
[ 15.591816] kmodloader: done loading kernel modules from /etc/modules.d/*
[ 32.420757] mtk_soc_eth 1e100000.ethernet eth0: Link is Down
[ 32.437249] mtk_soc_eth 1e100000.ethernet eth0: configuring for fixed/rgmii link mode
[ 32.453281] mtk_soc_eth 1e100000.ethernet eth0: Link is Up - 1Gbps/Full - flow control rx/tx
[ 32.529382] mt7530 mdio-bus:1f lan1: configuring for phy/gmii link mode
[ 32.573531] 8021q: adding VLAN 0 to HW filter on device lan1
[ 32.585027] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 32.597941] br-lan: port 1(lan1) entered blocking state
[ 32.608382] br-lan: port 1(lan1) entered disabled state
[ 32.645370] device lan1 entered promiscuous mode
[ 32.654570] device eth0 entered promiscuous mode
[ 32.789460] mt7530 mdio-bus:1f lan2: configuring for phy/gmii link mode
[ 32.829733] 8021q: adding VLAN 0 to HW filter on device lan2
[ 32.841910] br-lan: port 2(lan2) entered blocking state
[ 32.852384] br-lan: port 2(lan2) entered disabled state
[ 32.913451] device lan2 entered promiscuous mode
[ 33.061453] mt7530 mdio-bus:1f lan3: configuring for phy/gmii link mode
[ 33.101639] 8021q: adding VLAN 0 to HW filter on device lan3
[ 33.113933] br-lan: port 3(lan3) entered blocking state
[ 33.124405] br-lan: port 3(lan3) entered disabled state
[ 33.217416] device lan3 entered promiscuous mode
[ 33.357390] mt7530 mdio-bus:1f lan4: configuring for phy/gmii link mode
[ 33.397573] 8021q: adding VLAN 0 to HW filter on device lan4
[ 33.409630] br-lan: port 4(lan4) entered blocking state
[ 33.420076] br-lan: port 4(lan4) entered disabled state
[ 33.533404] device lan4 entered promiscuous mode
[ 33.665372] mt7530 mdio-bus:1f wan: configuring for phy/gmii link mode
[ 33.713507] 8021q: adding VLAN 0 to HW filter on device wan
[ 35.861449] mt7530 mdio-bus:1f lan1: Link is Up - 1Gbps/Full - flow control rx/tx
[ 35.876519] br-lan: port 1(lan1) entered blocking state
[ 35.887030] br-lan: port 1(lan1) entered forwarding state
[ 35.945478] IPv6: ADDRCONF(NETDEV_CHANGE): br-lan: link becomes ready
[ 37.167872] jffs2_scan_eraseblock(): End of filesystem marker found at 0x0
[ 37.181660] jffs2_build_filesystem(): unlocking the mtd device...
[ 37.181668] done.
[ 37.197884] jffs2_build_filesystem(): erasing all blocks after the end marker...
[ 71.887429] done.
[ 71.906195] jffs2: notice: (2256) jffs2_build_xattr_subsystem: complete building xattr subsystem, 0 of xdatum (0 unchecked, 0 orphan) and 0 of xref (0 dead, 0 orphan) found.
[ 72.281800] overlayfs: upper fs does not support tmpfile.

@openwrt-bot
Copy link
Author

adrianschmutzler:

[ 1.146383] mt7621-pci 1e140000.pcie: Parsing DT failed

@openwrt-bot
Copy link
Author

Borromini:

Thanks Adrian. I found [[https://lists.infradead.org/pipermail/openwrt-devel/2020-April/022762.html|his message from April on the mailing list]], indicating the wifi chip does not fully initialise with the new PCI driver (which is probably part of the 5.4 bump?).

I went to the end of that e-mail thread but no solution from what I can tell.

Edit: I found a few of Sergio's patches sitting in the [[https://git.openwrt.org/?p=openwrt/openwrt.git;a=tree;f=target/linux/ramips/patches-5.4|target/linux/ramips/patches-5.4 subdir]] for the mt7621 PCIe driver, but I have no idea where to go from here.

Commit [[https://git.openwrt.org/?p=openwrt/openwrt.git;a=commit;h=d21d6ea4547412632e01de505b7a2c8a83817a02|d21d6ea4547412632e01de505b7a2c8a83817a02]] introduced that driver.

@openwrt-bot
Copy link
Author

Borromini:

Well, I don't know what happened... But after a bit of back and forth between 19.07 and master images (to test other things) the 2,4 GHz radio is back. So I'm closing this for now.

Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment
Labels
Projects
None yet
Development

No branches or pull requests

1 participant