OpenWrt/LEDE Project

  • Status Unconfirmed
  • Percent Complete
    0%
  • Task Type Bug Report
  • Category Kernel
  • Assigned To No-one
  • Operating System All
  • Severity High
  • Priority Very Low
  • Reported Version Trunk
  • Due in Version Undecided
  • Due Date Undecided
  • Private
Attached to Project: OpenWrt/LEDE Project
Opened by Christof Leonhardt - 11.05.2020

FS#3091 - Latest build does not work properly on Banana Pi R2

I compile my image according to the given guide: https://openwrt.org/toh/sinovoip/sinovoip_banana_pi_r2

With kernel version 4.19 everything went smooth (OpenWrt Snapshot shown after boot was r12726-92616c4227).

Then i wanted to upgrade to the current master and after applying the new bpi_bananapi-r2-kernel.bin and root.squashfs files the boot process stops every time at the same point (see attached file boot.txt).

I did the follwing steps:

  1. ./scripts/feeds update -a
  2. ./scripts/feeds install -a
  3. make -j8 menuconfig
  4. follow instructions for menuconfig on guide
  5. make -j8 kernel_menuconfig
  6. follow instructions for kernel_menuconfig on guide
  7. I did not apply the patch that was given. I didn’t encounter any problems with failing network connections even with the old linux kernel. It also does not make any difference according to the current problem.
  8. make -j8
  9. changed repositories.conf according to the guide
  10. make image PROFILE=bpi_bananapi-r2
  11. apply new kernel-file and rootfs according to the guide

I tried this several times with different configurations but the result was the same anyway.

It seems like there is a bug at loading rootfs from MTD.

 


   boot.txt (15.1 KiB)
Andreygl commented on 19.05.2020 12:22

Facing same issue

Loading...

Available keyboard shortcuts

Tasklist

Task Details

Task Editing