OpenWrt/LEDE Project

  • Status Unconfirmed
  • Percent Complete
    0%
  • Task Type Bug Report
  • Category Base system
  • Assigned To No-one
  • Operating System All
  • Severity Low
  • Priority Very Low
  • Reported Version Trunk
  • Due in Version Undecided
  • Due Date Undecided
  • Private
Attached to Project: OpenWrt/LEDE Project
Opened by Nat - 02.05.2020

FS#3061 - Wi-Fi: Cannot set country code on AVM FRITZ 1750E

It is not possible to set the country code on both 2.4 and 5 GHz.

 

Device: AVM FRITZ!WLAN REPEATER 1750E (target ath79 generic)
Software version: OpenWrt SNAPSHOT r13136-ad27c133eb
Steps to reproduce:

Console:
Execute iw reg set DE and then iw reg get, and see how “global” sets to “DE” but phy#1 and phy#0 remain on “US”.

LuCI:
Sign in to LuCI, go to Network>Wireless (click Edit and then the “Advanced” tab) try to change the country code on either Wi-Fi device/frequency to “DE” and see how it resets to “driver default” after apply, which seems to be “US”.

Project Manager
Adrian Schmutzler commented on 08.05.2020 23:26

From my experience, I've never been able to change the phy settings, but only the global reg domain. On all my devices, phy has always stayed at US.

When I change it via LuCi, I get the same result. However, it seems the global setting is the one being applied, as it's more constrained.

Loading...

Available keyboard shortcuts

Tasklist

Task Details

Task Editing