Skip to content
New issue

Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.

By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.

Already on GitHub? Sign in to your account

FS#2996 - nanopi air cannot start in kernel 5.4.31 #7765

Closed
openwrt-bot opened this issue Apr 12, 2020 · 2 comments
Closed

FS#2996 - nanopi air cannot start in kernel 5.4.31 #7765

openwrt-bot opened this issue Apr 12, 2020 · 2 comments
Labels
flyspray kernel pull request/issue with Linux kernel related changes target/sunxi pull request/issue for sunxi target

Comments

@openwrt-bot
Copy link

luckybike:

device: nanopi air
steps:

  1. "git check" to get the last trunk
  2. "make menuconfig" select the device "nanopi air"
  3. then "make" to get the rom and dd it into TF card
  4. power on and you will see stop at "Starting kernel ..."

here is my system log:

U-Boot SPL 2020.01 (Apr 09 2020 - 20:09:21 +0000)
DRAM: 512 MiB
Trying to boot from MMC1

U-Boot 2020.01 (Apr 09 2020 - 20:09:21 +0000) Allwinner Technology

CPU: Allwinner H3 (SUN8I 1680)
Model: FriendlyARM NanoPi NEO
DRAM: 512 MiB
MMC: mmc@1c0f000: 0
Loading Environment from FAT... *** Warning - bad CRC, using default environment

In: serial
Out: serial
Err: serial
Net: phy interface0

Error: ethernet@1c30000 address not set.
No ethernet found.

starting USB...
Bus usb@1c1a000: USB EHCI 1.00
Bus usb@1c1a400: USB OHCI 1.0
Bus usb@1c1d000: USB EHCI 1.00
Bus usb@1c1d400: USB OHCI 1.0
scanning bus usb@1c1a000 for devices... 1 USB Device(s) found
scanning bus usb@1c1a400 for devices... 1 USB Device(s) found
scanning bus usb@1c1d000 for devices... 1 USB Device(s) found
scanning bus usb@1c1d400 for devices... 1 USB Device(s) found
scanning usb for storage devices... 0 Storage Device(s) found
Hit any key to stop autoboot: 0
switch to partitions #0, OK
mmc0 is current device
Scanning mmc 0:1...
Found U-Boot script /boot.scr
377 bytes read in 2 ms (183.6 KiB/s)

Executing script at 43100000

3078032 bytes read in 142 ms (20.7 MiB/s)
19497 bytes read in 3 ms (6.2 MiB/s)

Booting kernel from Legacy Image at 42000000 ...

Image Name: ARM OpenWrt Linux-5.4.31
Image Type: ARM Linux Kernel Image (uncompressed)
Data Size: 3077968 Bytes = 2.9 MiB
Load Address: 40008000
Entry Point: 40008000
Verifying Checksum ... OK

Flattened Device Tree blob at 43000000

Booting using the fdt blob at 0x43000000
EHCI failed to shut down host controller.
Loading Kernel Image
Using Device Tree in place at 43000000, end 43007c28

Starting kernel ...

@openwrt-bot
Copy link
Author

@aparcar aparcar added the kernel pull request/issue with Linux kernel related changes label Feb 22, 2022
@ynezz ynezz added the target/sunxi pull request/issue for sunxi target label Mar 7, 2022
@ynezz
Copy link
Member

ynezz commented Mar 8, 2022

Too old.

@ynezz ynezz closed this as completed Mar 8, 2022
Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment
Labels
flyspray kernel pull request/issue with Linux kernel related changes target/sunxi pull request/issue for sunxi target
Projects
None yet
Development

No branches or pull requests

3 participants