You signed in with another tab or window. Reload to refresh your session.You signed out in another tab or window. Reload to refresh your session.You switched accounts on another tab or window. Reload to refresh your session.Dismiss alert
[1] assumes that u-boot image is smaller than 512 KB, but this is no longer the case. Followed the instructions without a second thought and bricked my device. It could have used ${filesize} like the sections below it, or simply use 640 KiB instead of 512 KiB. (The 660 KiB in the section might be a typo, it is not multiple of 128 KiB)
Besides, links in [2] are mostly broken and outdated. In addition, for V4 A3 devices, there are no test pads for JTAG.
dword1511:
[1] assumes that u-boot image is smaller than 512 KB, but this is no longer the case. Followed the instructions without a second thought and bricked my device. It could have used ${filesize} like the sections below it, or simply use 640 KiB instead of 512 KiB. (The 660 KiB in the section might be a typo, it is not multiple of 128 KiB)
Besides, links in [2] are mostly broken and outdated. In addition, for V4 A3 devices, there are no test pads for JTAG.
[1] https://openwrt.org/toh/cloudengines/pogoplug#single-stage_bootloader
[2] https://openwrt.org/toh/cloudengines/pogo-v4
The text was updated successfully, but these errors were encountered: