OpenWrt/LEDE Project

  • Status Unconfirmed
  • Percent Complete
    0%
  • Task Type Bug Report
  • Category Base system
  • Assigned To No-one
  • Operating System All
  • Severity High
  • Priority Very Low
  • Reported Version Trunk
  • Due in Version Undecided
  • Due Date Undecided
  • Private
Attached to Project: OpenWrt/LEDE Project
Opened by 66enligne - 23.03.2020

FS#2922 - No COMFAST CF-E110NV2 8MB flash compatible version

CF-E110V2 is released with 8MB Flash (maybe it was before with 16 but apparently no longer, see forum discussions on CF-E110)
The current released package is only for 16MB flash

Can You generate and publicly release a 8MB flash compatible version too.

Hereafter the modified part of the dts file I’m using to compile my own FW (based on original OEM partition table).

flash@0 {
	compatible = "winbond,w25q64", "jedec,spi-nor";
	reg = <0>;
	spi-max-frequency = <25000000>;
	partitions {
		compatible = "fixed-partitions";
		#address-cells = <1>;
		#size-cells = <1>;
		partition@0 {
			label = "u-boot";
			reg = <0x000000 0x010000>;
			read-only;
		};
		art: partition@10000 {
			label = "art";
			reg = <0x010000 0x010000>;
			read-only;
		};
		partition@20000 {
			compatible = "denx,uimage";
			label = "firmware";
			reg = <0x020000 0x7d0000>;
		};
		partition@7f0000 {
			label = "nvram";
			reg = <0x7f0000 0x010000>;
			read-only;
		};
	};
};
 


Project Manager
Adrian Schmutzler commented on 15.04.2020 11:00

Please provide some evidence on that.
Has the sold flash changed, or has this been an error from the beginning?

Loading...

Available keyboard shortcuts

Tasklist

Task Details

Task Editing