OpenWrt/LEDE Project

  • Status Unconfirmed
  • Percent Complete
    0%
  • Task Type Bug Report
  • Category Base system
  • Assigned To No-one
  • Operating System All
  • Severity Low
  • Priority Very Low
  • Reported Version Trunk
  • Due in Version Undecided
  • Due Date Undecided
  • Private
Attached to Project: OpenWrt/LEDE Project
Opened by Luiz Ribeiro - 13.03.2020

FS#2902 - WRT32X WiFi on radio1 drops every couple of days

I’m having a problem where all my wireless clients are dropped on a wifi that is running on radio1 of my WRT32X. This used to happen once every week or so, but it seems to have gotten more frequent with it happening once every couple of days.

Versions: OpenWrt 19.07.2 r10947-65030d81f3 / LuCI openwrt-19.07 branch git-20.067.35699-cf18bdd
All packages have been recently upgraded. This used to happen on 19.06 too but it’s become more frequent recently.

Here are some things I’ve noticed:

1. Memory usage keeps steadily increasing as soon as this happens. If I don’t reboot the router, the router will eventually crash and reboot itself due to it running out of memory.
2. top doesn’t show me any processes using too much memory, so I don’t know exactly who is leaking memory when it happens (the memory leak is more likely to be a symptom than the root cause).
3. As soon as this happens, dmesg becomes flooded with messages such as “[ 1983.388642] ieee80211 phy0: staid 13 deleted” (with different “staid numbers”)
4. A router restart is sufficient to make things go back to normal.
5. This only happens for my 2.4GHz network for IoT on radio1. It does not happen for my 5GHz network on radio0, which stays stable.

FWIW, this is my current /etc/config/wireless: https://gist.github.com/luizribeiro/d15e3598747c126c0728696f5ebe8960

Any thoughts on what else I could be looking at to pinpoint where the bug is?

Luiz Ribeiro commented on 22.03.2020 15:04

I believe I've mitigated this issue by only keeping a single SSID on radio1.

In other words, I removed the section wifi-iface 'wifi_lan' for SSID "The Promised Lan 2.4GHz" from my wireless config.

So it's possible having two networks on the same radio was giving hostapd issues on the WRT32X.

Any idea how I can figure out if this is a hostapd or an issue with the WRT32X drivers so we can triage/debug this further?

Loading...

Available keyboard shortcuts

Tasklist

Task Details

Task Editing