You signed in with another tab or window. Reload to refresh your session.You signed out in another tab or window. Reload to refresh your session.You switched accounts on another tab or window. Reload to refresh your session.Dismiss alert
Using tcpdump on the connected computer I see outgoing traffic from the device, but incoming traffic does not reach the device.
The device correctly detects link changes, but different link speeds make no difference:
[ 1536.519019] eth0: link down
[ 1536.522824] br-lan: port 1(eth0) entered disabled state
[ 1537.561807] eth0: link up (1000Mbps/Full duplex)
[ 1537.566554] br-lan: port 1(eth0) entered blocking state
[ 1537.571932] br-lan: port 1(eth0) entered forwarding state
[ 1541.719009] eth0: link down
[ 1541.722824] br-lan: port 1(eth0) entered disabled state
[ 1542.761703] eth0: link up (100Mbps/Half duplex)
[ 1542.766359] br-lan: port 1(eth0) entered blocking state
[ 1542.771738] br-lan: port 1(eth0) entered forwarding state
[ 1545.879008] eth0: link down
[ 1545.882820] br-lan: port 1(eth0) entered disabled state
[ 1546.921800] eth0: link up (10Mbps/Half duplex)
[ 1546.926365] br-lan: port 1(eth0) entered blocking state
[ 1546.931744] br-lan: port 1(eth0) entered forwarding state
Please find attached dmesg outputs for both snapshot (snap) and 19.07.2 (19072).
The text was updated successfully, but these errors were encountered:
rogerpueyo:
Hi,
The Ubiquiti LiteAP ac (LAP-120) does not receive incoming packets via eth0 with the latest snapshot (OpenWrt SNAPSHOT, r12498-2a18840cc7):
root@OpenWrt:/# ifconfig br-lan Link encap:Ethernet HWaddr B4:FB:E4:FA:FA:FA inet addr:192.168.1.1 Bcast:192.168.1.255 Mask:255.255.255.0 inet6 addr: fdaa:a708:e003::1/60 Scope:Global inet6 addr: fe80::b6fb:e4ff:fefa:fafa/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:34 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:4420 (4.3 KiB)
eth0 Link encap:Ethernet HWaddr B4:FB:E4:FA:FA:FA
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:49 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 (0.0 B) TX bytes:6622 (6.4 KiB)
Interrupt:4
It works correctly with latest stable, 19.07.2.
Using tcpdump on the connected computer I see outgoing traffic from the device, but incoming traffic does not reach the device.
The device correctly detects link changes, but different link speeds make no difference:
[ 1536.519019] eth0: link down
[ 1536.522824] br-lan: port 1(eth0) entered disabled state
[ 1537.561807] eth0: link up (1000Mbps/Full duplex)
[ 1537.566554] br-lan: port 1(eth0) entered blocking state
[ 1537.571932] br-lan: port 1(eth0) entered forwarding state
[ 1541.719009] eth0: link down
[ 1541.722824] br-lan: port 1(eth0) entered disabled state
[ 1542.761703] eth0: link up (100Mbps/Half duplex)
[ 1542.766359] br-lan: port 1(eth0) entered blocking state
[ 1542.771738] br-lan: port 1(eth0) entered forwarding state
[ 1545.879008] eth0: link down
[ 1545.882820] br-lan: port 1(eth0) entered disabled state
[ 1546.921800] eth0: link up (10Mbps/Half duplex)
[ 1546.926365] br-lan: port 1(eth0) entered blocking state
[ 1546.931744] br-lan: port 1(eth0) entered forwarding state
Please find attached dmesg outputs for both snapshot (snap) and 19.07.2 (19072).
The text was updated successfully, but these errors were encountered: