You signed in with another tab or window. Reload to refresh your session.You signed out in another tab or window. Reload to refresh your session.You switched accounts on another tab or window. Reload to refresh your session.Dismiss alert
Using the web interface kept adding and deleting VLANs. Ended up with 15 of these lines in /etc/config/network:
option vlan X
where X was: 1, 2, 3, 4, 5, 6, 8, 10, 11, 12, 13, 14, 15, 16, 17
There is no 7 and 9.
The last VLAN did not work (packets arriving on that VLAN were dropped).
The VLANs are set according to requirement with vid option. These were set between 1 and 127.
These were not changed. The issue is that using Luci web interface the user ends up with a configuration that does not work. What does not work is having an option vlan 17, even though there are only 15 defined.
The change to fix it had to be done by editing a file. And without the chip specification the user would not even guess that 16 is the max number for vlan option when looking at the file.
matrex:
Device:
D-Link DWR-118 A2
Software versions:
r12203-766e778226
Using the web interface kept adding and deleting VLANs. Ended up with 15 of these lines in /etc/config/network:
option vlan X
where X was: 1, 2, 3, 4, 5, 6, 8, 10, 11, 12, 13, 14, 15, 16, 17
There is no 7 and 9.
The last VLAN did not work (packets arriving on that VLAN were dropped).
I have found a manual at http://download.villagetelco.org/hardware/MT7620/MT7620_ProgrammingGuide.pdf on page 237 it states that 16 VLAN id-s are supported.
Editing the "networks" in /etc/config to change 17 to 7 fixed the issue.
The text was updated successfully, but these errors were encountered: