You signed in with another tab or window. Reload to refresh your session.You signed out in another tab or window. Reload to refresh your session.You switched accounts on another tab or window. Reload to refresh your session.Dismiss alert
Mac Address strts with 74:4D:28 (I include it because maybe it indicates a newer HW revisionthat needs to be supported)
Steps to reproduce
Boot machine from network
Flash image (tried 3 different versions, all same result)
Wait for reboot to complete
NOTE: LED 5 is red, I expect them to be green if network cable was connected, or off otherwise
run iw list => Empty response
Install pciutils (opkg install pciutils)
run lspci -nn => Nothing is outputted
run cat /proc/cpuinfo => Note the Mhz of the device is 299, while the device should be running at 600 Mhz
So to summarize
LEDs aren't working properly (or indicating its in a failed state, although I can't find anything obvious in dmesg)
WiFi isn't working
pci listing doesn't work (maybe this device doesn't have anything pci related, but I executed that command to debug the wifi issue)
CPU is limited to 300 Mhz while it should be 600 Mhz (in dmesg I can actually see in the commandline it boots with MHZ=3000000, not sure how/if I can override or why the default would be 300
The text was updated successfully, but these errors were encountered:
I confirm the issue with new hardware. Already posted on the forum and openwrt-devel list [[https://forum.openwrt.org/t/wireless-config-missing-in-rb951ui-2hnd/55949|Forum Post]]
nathansamson:
Supply the following if possible:
Steps to reproduce
iw list
=> Empty responselspci -nn
=> Nothing is outputtedcat /proc/cpuinfo
=> Note the Mhz of the device is 299, while the device should be running at 600 MhzSo to summarize
The text was updated successfully, but these errors were encountered: