OpenWrt/LEDE Project

  • Status Unconfirmed
  • Percent Complete
    0%
  • Task Type Bug Report
  • Category Base system
  • Assigned To No-one
  • Operating System All
  • Severity Low
  • Priority Very Low
  • Reported Version openwrt-19.07
  • Due in Version Undecided
  • Due Date Undecided
  • Private
Attached to Project: OpenWrt/LEDE Project
Opened by moeller0 - 31.01.2020

FS#2792 - lantiq DSL statuistics and diagnostics do not report G.INP Retransmission counters

OpenWrt 19.07.1 on BT HomeHub5A (lantiq vrx200) the dsl stats report tool (ltq-vdsl-app_4.17.18.6-2_mips_24kc.ipk) and the matching kerel module (kmod-ltq-vdsl-vr9-mei_4.14.167+1.5.17.6-4_mips_24kc.ipk) do not report ITU G.998.4 Retransmission counts (on lines using G.INP retransmissions. It turns out that adding:
CONFIGURE_ARGS += \

  1. -enable-dsl-pm-retx-counters \
  2. -enable-dsl-pm-retx-thresholds

to openwrt/package/kernel/lantiq/ltq-vdsl/Makefile and openwrt/package/network/config/ltq-vdsl-app/Makefile and rebuilding yields a working ReTx counter report:

root@BTHH5A:~# . /lib/functions/lantiq_dsl.sh ; dsl_cmd rtsg 0
nReturn=0 nDirection=0 nRxCorruptedTotal=0 nRxUncorrectedProtected=0 nRxRetransmitted=0 nRxCorrected=0 nTxRetransmitted=3
root@ BTHH5A:~# . /lib/functions/lantiq_dsl.sh ; dsl_cmd rtsg 1
nReturn=0 nDirection=1 nRxCorruptedTotal=7114893 nRxUncorrectedProtected=6171968 nRxRetransmitted=0 nRxCorrected=942925 nTxRetransmitted=9228892

At least in Germany the incumbent uses G.998.4 Retransmission, not only do deal with impulse noise, but also as a diagnostic counters for its Dynamik Link/Spektrum Management tool that based on these and other counters will limit the maximum perissable Sync for each line to optimize lik stability. It would be really great if stock OpenWrt builds would alow to report these values and I would like to propose to change the makefiles as shown above.

moeller0 commented on 14.03.2020 23:23

Here is a patch to get the required changes into the two relevant packages:

diff --git a/package/kernel/lantiq/ltq-vdsl/Makefile b/package/kernel/lantiq/ltq-vdsl/Makefile
index cf3711beb7..e42f191343 100644
--- a/package/kernel/lantiq/ltq-vdsl/Makefile
+++ b/package/kernel/lantiq/ltq-vdsl/Makefile
@@ -69,6 +69,10 @@ CONFIGURE_ARGS += --enable-model=full
 #CONFIGURE_ARGS += --enable-model=typical
 #CONFIGURE_ARGS += --enable-model=debug
 
+CONFIGURE_ARGS += \
+	--enable-dsl-pm-retx-counters \
+	--enable-dsl-pm-retx-thresholds  
+
 define Build/InstallDev
 	$(INSTALL_DIR) $(1)/usr/include/drv_vdsl_cpe_api
 	$(CP) $(PKG_BUILD_DIR)/src/include/drv_dsl_cpe*.h $(1)/usr/include/drv_vdsl_cpe_api/
diff --git a/package/network/config/ltq-vdsl-app/Makefile b/package/network/config/ltq-vdsl-app/Makefile
index e2ecefa258..c5a96b5a51 100644
--- a/package/network/config/ltq-vdsl-app/Makefile
+++ b/package/network/config/ltq-vdsl-app/Makefile
@@ -56,6 +56,9 @@ CONFIGURE_ARGS += \
 	--enable-model=typical \
 	--enable-dsl-pm-showtime \
 	--disable-dsl-ceoc
+CONFIGURE_ARGS += \
+	--enable-dsl-pm-retx-counters \
+	--enable-dsl-pm-retx-thresholds
 #CONFIGURE_ARGS += --enable-model=debug
 
 define Package/ltq-vdsl-app/install

Loading...

Available keyboard shortcuts

Tasklist

Task Details

Task Editing