You signed in with another tab or window. Reload to refresh your session.You signed out in another tab or window. Reload to refresh your session.You switched accounts on another tab or window. Reload to refresh your session.Dismiss alert
On router Asus RT-N11P (MT7620) not work properly hardware LEDs. Zero-day problem. Affected all firmwares from 18.06.0 to 19.07.1. No additional packages used. Router LEDs "WiFi", "WAN", "LAN" always on even if WiFi fully disabled and all cables is unplug.
Steps to reproduce:
1: Disable WiFi (if enabled) and unplug all cables.
2: LEDs will still light even if reboot.
Changing the LEDs settings does not solve the problem at all. LEDE 18.06.XX not have problem with "WiFi" LED. 19.07.XX have problems with all LEDs.
The text was updated successfully, but these errors were encountered:
Don't see a problem just from the config.
Since you say it's a zero-day problem, maybe the GPIOs are just different for your variant (as the image is actually meant for RT-N12+).
Can you try to evaluate the correct gpios for your device if that's the only thing not working?
This is a common problem if the firmware for your router is based on the firmware for another router. This is definitely a problem in GPIOs. just need to calibrate them for RT-N11P.
TmorKax:
On router Asus RT-N11P (MT7620) not work properly hardware LEDs. Zero-day problem. Affected all firmwares from 18.06.0 to 19.07.1. No additional packages used. Router LEDs "WiFi", "WAN", "LAN" always on even if WiFi fully disabled and all cables is unplug.
Steps to reproduce:
1: Disable WiFi (if enabled) and unplug all cables.
2: LEDs will still light even if reboot.
Changing the LEDs settings does not solve the problem at all. LEDE 18.06.XX not have problem with "WiFi" LED. 19.07.XX have problems with all LEDs.
The text was updated successfully, but these errors were encountered: