OpenWrt/LEDE Project

  • Status Unconfirmed
  • Percent Complete
  • Task Type Build Failure
  • Category Base system
  • Assigned To No-one
  • Operating System All
  • Severity Low
  • Priority Very Low
  • Reported Version Trunk
  • Due in Version Undecided
  • Due Date Undecided
  • Private
Attached to Project: OpenWrt/LEDE Project
Opened by pedro77 - 12.01.2020

FS#2729 - Error building profile iom_ix2_200

Error building profile iom_ix2_200

imagebuilder iom_ix2_200

I’m trying to build image for Iomega StorCenter ix2-200 using the last snapshot (, today 2020-01-12) using the command:

make image PROFILE=iom_ix2_200

I got the error:

Collected errors:
 * opkg_install_cmd: Cannot install package kmod-i2c-mv64xxx.
make[2]: *** [Makefile:157: package_install] Error 255
make[1]: *** [Makefile:118: _call_image] Error 2
make: *** [Makefile:197: image] Error 2

The package kmod-i2c-mv64xxx is missing...
I removed the package from .targetinfo:

Target-Profile: DEVICE_iom_ix2_200
Target-Profile-Name: Iomega StorCenter ix2-200
Target-Profile-Packages:  kmod-gpio-button-hotplug kmod-i2c-mv64xxx kmod-hwmon-lm63
Target-Profile-hasImageMetadata: 1
Target-Profile-SupportedDevices: iom,ix2,200

Build firmware images for Iomega StorCenter ix2-200


Target-Profile-Packages:  kmod-gpio-button-hotplug kmod-hwmon-lm63

all ok, but sysupgrade fail image check:

Device iom,ix2-200 not supported by this image
Supported devices: iom,ix2,200
Image check failed.

to install image i need to force it:

sysupgrade -F /tmp/openwrt-kirkwood-iom_ix2_200-squashfs-sysupgrade.bin


Device iom,ix2-200 not supported by this image
Supported devices: iom,ix2,200
Image check failed but --force given - will update anyway!
Saving config files...
Commencing upgrade. Closing all shell sessions.
Connection to storage.lan closed by remote host.
Connection to storage.lan closed.

al last, I have an extroot configuration and after a sysupgrade I have always a bad .extroot-uuid, but this is another story...

pedro77 commented on 08.02.2020 12:23

Same problem with latest snapshot and current released version (19.07.1)


Available keyboard shortcuts


Task Details

Task Editing