New issue
Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.
By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.
Already on GitHub? Sign in to your account
FS#2716 - After 1 day WiFi clients connected to 2.4 and 5 GHZ band in same network are isolated from each othe #7514
Comments
Kabachek: Yep, this is an actual problem. Some output from router
the logs are clear So, after i do /sbin/wifi command, the printer becomes available
|
dim:
Model: TOTOLINK A7000R
Architecture: MediaTek MT7621 ver:1 eco:3
Firmware Version: OpenWrt SNAPSHOT r11835-0590d74db2 / LuCI Master git-19.364.49900-d07cfba
Kernel Version: 4.14.160
Installed packages: luci luci-ssl luci-app-sqm luci-app-ddns ddns-scripts_no-ip_com luci-app-adblock luci-app-bcp38 luci-app-wol luci-app-statistics luci-app-wireguard luci-app-openvpn luci-app-upnp
Configured only WiFi interfaces with separate names OpenWrt and OpenWrt5, psk2 with passphrase and hidden SSID.
After 1 day OpenWrt still showing:
cat /sys/devices/virtual/net/br-lan/lower_wlan0/brport/hairpin_mode
1
cat /sys/devices/virtual/net/br-lan/lower_wlan0/brport/multicast_to_unicast
1
cat /sys/devices/virtual/net/br-lan/lower_wlan0/brport/isolated
0
cat /sys/devices/virtual/net/br-lan/lower_wlan1/brport/hairpin_mode
1
cat /sys/devices/virtual/net/br-lan/lower_wlan1/brport/multicast_to_unicast
1
cat /sys/devices/virtual/net/br-lan/lower_wlan1/brport/isolated
0
On forum found workaround to manually add
option multicast_to_unicast 0
to all affected /etc/config/wireless wifi-iface sections didn‘t helped.So temporary added /sbin/wifi command to crontab at every night.
The text was updated successfully, but these errors were encountered: