You signed in with another tab or window. Reload to refresh your session.You signed out in another tab or window. Reload to refresh your session.You switched accounts on another tab or window. Reload to refresh your session.Dismiss alert
I am on the latest master snapshot using a Comfast CF-E5. The reset button is supposed to be on GPIO17. I have an IRQ entry of gpio-ath79 17 on my system but when I press the button I can never see any response in the logs, and the device never responds to the key with either a reboot or firstboot. What can I check? It used to work on an older version. I have documented what I have found on the forum.
root@OpenWrt:~# cat /sys/kernel/debug/gpio
gpiochip0: GPIOs 0-31, parent: platform/18040000.gpio, 18040000.gpio:
gpio-0 ( |cf-e5:blue:wlan ) out hi
gpio-1 ( |sysfs ) out hi
gpio-2 ( |cf-e5:blue:rssi0 ) out hi
gpio-3 ( |cf-e5:blue:rssi1 ) out hi
gpio-4 ( |cf-e5:blue:wan ) out hi
gpio-11 ( |sysfs ) out hi
gpio-12 ( |sysfs ) out hi
gpio-14 ( |sysfs ) out hi
gpio-15 ( |cf-e5:blue:rssi2 ) out hi
gpio-16 ( |cf-e5:blue:lan ) out lo
gpio-17 ( |reset ) in hi IRQ
The text was updated successfully, but these errors were encountered:
nickberry17:
Supply the following if possible:
Comfast CF-E5
master
Press the reset button, observe that nothing happens. We expect the device to reboot or perform factory reset.
https://forum.openwrt.org/t/ath79-reset-button-not-working/50564
I am on the latest master snapshot using a Comfast CF-E5. The reset button is supposed to be on GPIO17. I have an IRQ entry of gpio-ath79 17 on my system but when I press the button I can never see any response in the logs, and the device never responds to the key with either a reboot or firstboot. What can I check? It used to work on an older version. I have documented what I have found on the forum.
https://forum.openwrt.org/t/ath79-reset-button-not-working/50564
cat /proc/interrupts
CPU0
3: 16348 MIPS 3 ehci_hcd:usb1
4: 0 MIPS 4 19000000.eth
5: 24687 MIPS 5 1a000000.eth
7: 153665 MIPS 7 timer
9: 30 MISC 3 ttyS0
12: 93596 INTC 0 ath9k
17: 0 gpio-ath79 17 keys
ERR: 49
Here is the relevant portion of the DTS file
root@OpenWrt:~# cat /sys/kernel/debug/gpio
gpiochip0: GPIOs 0-31, parent: platform/18040000.gpio, 18040000.gpio:
gpio-0 ( |cf-e5:blue:wlan ) out hi
gpio-1 ( |sysfs ) out hi
gpio-2 ( |cf-e5:blue:rssi0 ) out hi
gpio-3 ( |cf-e5:blue:rssi1 ) out hi
gpio-4 ( |cf-e5:blue:wan ) out hi
gpio-11 ( |sysfs ) out hi
gpio-12 ( |sysfs ) out hi
gpio-14 ( |sysfs ) out hi
gpio-15 ( |cf-e5:blue:rssi2 ) out hi
gpio-16 ( |cf-e5:blue:lan ) out lo
gpio-17 ( |reset ) in hi IRQ
The text was updated successfully, but these errors were encountered: