We read every piece of feedback, and take your input very seriously.
To see all available qualifiers, see our documentation.
Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.
By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.
Already on GitHub? Sign in to your account
Josh4300:
There is a error in readme for 19.07:
Highlights in OpenWrt 19.07 * WPA3 configuration support * Install wpad-openssl or wpad-wolfssl for WPA3 support ^^^^^^^^^^^^
this is incorrect. I wasted some hours trying to get WPA3 to work with wpad-wolfssl and failed, apparently WPA3 only works with wpad-openssl.
please remove mention of wpad-woflssl for WPA3 in readme.
Others have encountered the same problem, based on the same mistake in readme:
[1]
https://forum.openwrt.org/t/problems-trying-out-wpa3/49249/3
wolfssl didn't work -> "I have changed to use wpad-openssl and it seems to work."
[2]
https://forum.openwrt.org/t/wpa3-wolfssl-fail-openssl-success/50161
wolfssl - fails, openssl - works
[3]
https://forum.openwrt.org/t/no-option-in-gui-to-set-wpa3-auth/45652/6
"It seems like wpad-openssl is working in general better then wpad-wolfssl"
[4]
https://forum.openwrt.org/t/wpa3-support-in-openwrt/10554/115
"many reports of better success on openssl rather than wolfssl"
The text was updated successfully, but these errors were encountered:
WPA3 on wpad-wolfssl works now. Closing this ancient issue.
Sorry, something went wrong.
No branches or pull requests
Josh4300:
There is a error in readme for 19.07:
Highlights in OpenWrt 19.07 * WPA3 configuration support * Install wpad-openssl or wpad-wolfssl for WPA3 support ^^^^^^^^^^^^
this is incorrect. I wasted some hours trying to get WPA3 to work with wpad-wolfssl and failed, apparently WPA3 only works with wpad-openssl.
please remove mention of wpad-woflssl for WPA3 in readme.
Others have encountered the same problem, based on the same mistake in readme:
[1]
https://forum.openwrt.org/t/problems-trying-out-wpa3/49249/3
wolfssl didn't work -> "I have changed to use wpad-openssl and it seems to work."
[2]
https://forum.openwrt.org/t/wpa3-wolfssl-fail-openssl-success/50161
wolfssl - fails, openssl - works
[3]
https://forum.openwrt.org/t/no-option-in-gui-to-set-wpa3-auth/45652/6
"It seems like wpad-openssl is working in general better then wpad-wolfssl"
[4]
https://forum.openwrt.org/t/wpa3-support-in-openwrt/10554/115
"many reports of better success on openssl rather than wolfssl"
The text was updated successfully, but these errors were encountered: