Skip to content
New issue

Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.

By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.

Already on GitHub? Sign in to your account

FS#2652 - Direct firmware load for ath10k/QCA988X/hw2.0/ct-firmware-X.bin failed with error -2 #7525

Closed
openwrt-bot opened this issue Dec 4, 2019 · 2 comments
Labels

Comments

@openwrt-bot
Copy link

tarask1n:

Device: TP-Link Archer C7 V2
Build: openwrt-19.07.0-rc2-ar71xx-generic-archer-c7-v2-squashfs

Steps to reproduce:

  1. Flash the image
  2. Boot device and see kernel log

Expected result: Successfully loaded firmware

Actual result: Many attempts to load firmware with final status "firmware ath10k!QCA988X!hw2.0!board-2.bin: firmware_loading_store: map pages failed"
Low performance on 5GHz [[https://www.speedtest.net/result/8823462753|SpeedTest]]

Kernel log:

[ 0.000000] Linux version 4.14.156 (builder@buildhost) (gcc version 7.5.0 (OpenWrt GCC 7.5.0 r10775-db8345d8e4)) #0 Sat Nov 30 15:52:33 2019
[ 0.000000] MyLoader: sysp=00080000, boardp=00000000, parts=00000000
[ 0.000000] bootconsole [early0] enabled
[ 0.000000] CPU0 revision is: 00019750 (MIPS 74Kc)
[ 0.000000] SoC: Qualcomm Atheros QCA9558 ver 1 rev 0
[ 0.000000] Determined physical RAM map:
[ 0.000000] memory: 08000000 @ 00000000 (usable)
[ 0.000000] Initrd not found or empty - disabling initrd
[ 0.000000] Primary instruction cache 64kB, VIPT, 4-way, linesize 32 bytes.
[ 0.000000] Primary data cache 32kB, 4-way, VIPT, cache aliases, linesize 32 bytes
[ 0.000000] Zone ranges:
[ 0.000000] Normal [mem 0x0000000000000000-0x0000000007ffffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000000000-0x0000000007ffffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x0000000007ffffff]
[ 0.000000] On node 0 totalpages: 32768
[ 0.000000] free_area_init_node: node 0, pgdat 804ead30, node_mem_map 81000020
[ 0.000000] Normal zone: 256 pages used for memmap
[ 0.000000] Normal zone: 0 pages reserved
[ 0.000000] Normal zone: 32768 pages, LIFO batch:7
[ 0.000000] random: get_random_bytes called from 0x804ee740 with crng_init=0
[ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=132768
[ 0.000000] pcpu-alloc: [0] 0
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 32512
[ 0.000000] Kernel command line: board=ARCHER-C7-V2 console=ttyS0,115200 rootfstype=squashfs noinitrd
[ 0.000000] PID hash table entries: 512 (order: -1, 2048 bytes)
[ 0.000000] Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
[ 0.000000] Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
[ 0.000000] Writing ErrCtl register=00000000
[ 0.000000] Readback ErrCtl register=00000000
[ 0.000000] Memory: 124296K/131072K available (3944K kernel code, 195K rwdata, 516K rodata, 328K init, 211K bss, 6776K reserved, 0K cma-reserved)
[ 0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[ 0.000000] NR_IRQS: 51
[ 0.000000] Clocks: CPU:720.000MHz, DDR:600.000MHz, AHB:200.000MHz, Ref:40.000MHz
[ 0.000000] clocksource: MIPS: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 5309056796 ns
[ 0.000007] sched_clock: 32 bits at 360MHz, resolution 2ns, wraps every 5965232126ns
[ 0.008295] Calibrating delay loop... 358.80 BogoMIPS (lpj=1794048)
[ 0.074984] pid_max: default: 32768 minimum: 301
[ 0.080079] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.087122] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.096406] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[ 0.106904] futex hash table entries: 256 (order: -1, 3072 bytes)
[ 0.114337] NET: Registered protocol family 16
[ 0.120164] MIPS: machine is TP-LINK Archer C7
[ 0.127962] ar724x-pci ar724x-pci.0: PCIe link is down
[ 0.133466] registering PCI controller with io_map_base unset
[ 0.139702] registering PCI controller with io_map_base unset
[ 0.636127] PCI host bridge to bus 0000:00
[ 0.640492] pci_bus 0000:00: root bus resource [mem 0x10000000-0x11ffffff]
[ 0.647822] pci_bus 0000:00: root bus resource [io 0x0000]
[ 0.653749] pci_bus 0000:00: root bus resource [??? 0x00000000 flags 0x0]
[ 0.660979] pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff]
[ 0.669417] pci_bus 0000:00: busn_res: [bus 00-ff] end is updated to 00
[ 0.669524] PCI host bridge to bus 0000:01
[ 0.673907] pci_bus 0000:01: root bus resource [mem 0x12000000-0x13ffffff]
[ 0.681215] pci_bus 0000:01: root bus resource [io 0x0001]
[ 0.687150] pci_bus 0000:01: root bus resource [??? 0x00000000 flags 0x0]
[ 0.694370] pci_bus 0000:01: No busn resource found for root bus, will use [bus 01-ff]
[ 0.702831] pci 0000:01:00.0: [168c:003c] type 00 class 0x028000
[ 0.702885] pci 0000:01:00.0: reg 0x10: [mem 0x00000000-0x001fffff 64bit]
[ 0.702939] pci 0000:01:00.0: reg 0x30: [mem 0x00000000-0x0000ffff pref]
[ 0.703012] pci 0000:01:00.0: supports D1 D2
[ 0.703174] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01
[ 0.703196] pci 0000:01:00.0: BAR 0: assigned [mem 0x12000000-0x121fffff 64bit]
[ 0.710987] pci 0000:01:00.0: BAR 6: assigned [mem 0x12200000-0x1220ffff pref]
[ 0.721462] clocksource: Switched to clocksource MIPS
[ 0.727692] NET: Registered protocol family 2
[ 0.733085] TCP established hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.740507] TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.747317] TCP: Hash tables configured (established 1024 bind 1024)
[ 0.754192] UDP hash table entries: 256 (order: 0, 4096 bytes)
[ 0.760415] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[ 0.767315] NET: Registered protocol family 1
[ 0.772018] PCI: CLS 0 bytes, default 32
[ 0.774337] Crashlog allocated RAM at address 0x3f00000
[ 0.780893] workingset: timestamp_bits=30 max_order=15 bucket_order=0
[ 0.791954] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 0.798157] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
[ 0.816198] io scheduler noop registered
[ 0.820367] io scheduler deadline registered (default)
[ 0.826224] Serial: 8250/16550 driver, 16 ports, IRQ sharing enabled
[ 0.834733] console [ttyS0] disabled
[ 0.858619] serial8250.0: ttyS0 at MMIO 0x18020000 (irq = 11, base_baud = 2500000) is a 16550A
[ 0.867805] console [ttyS0] enabled
[ 0.875230] bootconsole [early0] disabled
[ 0.889099] m25p80 spi0.0: found w25q128, expected m25p80
[ 0.905426] m25p80 spi0.0: w25q128 (16384 Kbytes)
[ 0.910649] 5 tp-link partitions found on MTD device spi0.0
[ 0.916329] Creating 5 MTD partitions on "spi0.0":
[ 0.921196] 0x000000000000-0x000000020000 : "u-boot"
[ 0.927610] 0x000000020000-0x0000001a3174 : "kernel"
[ 0.933761] 0x0000001a3174-0x000000ff0000 : "rootfs"
[ 0.939420] mtd: device 2 (rootfs) set to be root filesystem
[ 0.945259] 1 squashfs-split partitions found on MTD device rootfs
[ 0.951549] 0x000000460000-0x000000ff0000 : "rootfs_data"
[ 0.959188] 0x000000ff0000-0x000001000000 : "art"
[ 0.965094] 0x000000020000-0x000000ff0000 : "firmware"
[ 0.972722] libphy: Fixed MDIO Bus: probed
[ 0.987098] switch0: Atheros AR8327 rev. 4 switch registered on ag71xx-mdio.0
[ 1.682299] libphy: ag71xx_mdio: probed
[ 2.312986] ag71xx ag71xx.0: connected to PHY at ag71xx-mdio.0:00 [uid=004dd034, driver=Atheros AR8216/AR8236/AR8316]
[ 2.324244] eth0: Atheros AG71xx at 0xb9000000, irq 4, mode: rgmii
[ 2.601460] random: fast init done
[ 2.953008] eth1: Atheros AG71xx at 0xba000000, irq 5, mode: sgmii
[ 2.961042] NET: Registered protocol family 10
[ 2.969636] Segment Routing with IPv6
[ 2.973483] NET: Registered protocol family 17
[ 2.978026] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
[ 2.991636] 8021q: 802.1Q VLAN Support v1.8
[ 2.997161] hctosys: unable to open rtc device (rtc0)
[ 3.008375] VFS: Mounted root (squashfs filesystem) readonly on device 31:2.
[ 3.016762] Freeing unused kernel memory: 328K
[ 3.021273] This architecture does not have kernel memory protection.
[ 3.697022] init: Console is alive
[ 3.700658] init: - watchdog -
[ 4.864155] kmodloader: loading kernel modules from /etc/modules-boot.d/

[ 4.925014] usbcore: registered new interface driver usbfs
[ 4.930667] usbcore: registered new interface driver hub
[ 4.936179] usbcore: registered new device driver usb
[ 4.945589] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 4.953550] ehci-platform: EHCI generic platform driver
[ 4.958929] ehci-platform ehci-platform.0: EHCI Host Controller
[ 4.965002] ehci-platform ehci-platform.0: new USB bus registered, assigned bus number 1
[ 4.975286] ehci-platform ehci-platform.0: TX-TX IDP fix enabled
[ 4.981392] ehci-platform ehci-platform.0: irq 48, io mem 0x1b000000
[ 5.011498] ehci-platform ehci-platform.0: USB 2.0 started, EHCI 1.00
[ 5.018700] hub 1-0:1.0: USB hub found
[ 5.022823] hub 1-0:1.0: 1 port detected
[ 5.027191] ehci-platform ehci-platform.1: EHCI Host Controller
[ 5.033274] ehci-platform ehci-platform.1: new USB bus registered, assigned bus number 2
[ 5.043567] ehci-platform ehci-platform.1: TX-TX IDP fix enabled
[ 5.049671] ehci-platform ehci-platform.1: irq 49, io mem 0x1b400000
[ 5.081538] ehci-platform ehci-platform.1: USB 2.0 started, EHCI 1.00
[ 5.088725] hub 2-0:1.0: USB hub found
[ 5.092846] hub 2-0:1.0: 1 port detected
[ 5.097697] kmodloader: done loading kernel modules from /etc/modules-boot.d/*
[ 5.115421] init: - preinit -
[ 6.321585] eth1: link up (1000Mbps/Full duplex)
[ 6.344679] random: procd: uninitialized urandom read (4 bytes read)
[ 9.689070] jffs2: notice: (472) jffs2_build_xattr_subsystem: complete building xattr subsystem, 5 of xdatum (3 unchecked, 2 orphan) and 34 of xref (2 dead, 0 orphan) found.
[ 9.707841] mount_root: switching to jffs2 overlay
[ 9.736909] overlayfs: upper fs does not support tmpfile.
[ 9.750570] urandom-seed: Seeding with /etc/urandom.seed
[ 9.877048] eth1: link down
[ 9.891025] procd: - early -
[ 9.894601] procd: - watchdog -
[ 10.517609] procd: - watchdog -
[ 10.521047] procd: - ubus -
[ 10.643911] random: ubusd: uninitialized urandom read (4 bytes read)
[ 10.652247] random: ubusd: uninitialized urandom read (4 bytes read)
[ 10.659064] random: ubusd: uninitialized urandom read (4 bytes read)
[ 10.666380] procd: - init -
[ 11.465542] urngd: v1.0.0 started.
[ 11.707725] kmodloader: loading kernel modules from /etc/modules.d/*
[ 11.718325] random: crng init done
[ 11.721799] random: 6 urandom warning(s) missed due to ratelimiting
[ 11.755686] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 11.770749] Loading modules backported from Linux version v4.19.85-0-gc63ee2939dc1
[ 11.778475] Backport generated by backports.git v4.19.85-1-0-g8a8be258
[ 11.787511] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 11.800920] nf_conntrack version 0.5.0 (2048 buckets, 8192 max)
[ 11.929908] xt_time: kernel timezone is -0000
[ 12.097573] PPP generic driver version 2.4.2
[ 12.104120] NET: Registered protocol family 24
[ 12.132091] pci 0000:01:00.0: using irq 41 for pin 1
[ 12.137137] ath10k 4.19 driver, optimized for CT firmware, probing pci device: 0x3c.
[ 12.146305] PCI: Enabling device 0000:01:00.0 (0000 -> 0002)
[ 12.152264] ath10k_pci 0000:01:00.0: pci irq legacy oper_irq_mode 1 irq_mode 0 reset_mode 0
[ 13.096140] ath10k_pci 0000:01:00.0: Direct firmware load for ath10k/fwcfg-pci-0000:01:00.0.txt failed with error -2
[ 13.106853] ath10k_pci 0000:01:00.0: Falling back to user helper
[ 13.288487] firmware ath10k!fwcfg-pci-0000:01:00.0.txt: firmware_loading_store: map pages failed
[ 13.297680] ath10k_pci 0000:01:00.0: Direct firmware load for ath10k/pre-cal-pci-0000:01:00.0.bin failed with error -2
[ 13.308565] ath10k_pci 0000:01:00.0: Falling back to user helper
[ 13.451094] firmware ath10k!pre-cal-pci-0000:01:00.0.bin: firmware_loading_store: map pages failed
[ 13.463396] ath10k_pci 0000:01:00.0: Direct firmware load for ath10k/QCA988X/hw2.0/ct-firmware-5.bin failed with error -2
[ 13.474559] ath10k_pci 0000:01:00.0: Falling back to user helper
[ 13.615058] firmware ath10k!QCA988X!hw2.0!ct-firmware-5.bin: firmware_loading_store: map pages failed
[ 13.624679] ath10k_pci 0000:01:00.0: Direct firmware load for ath10k/QCA988X/hw2.0/ct-firmware-2.bin failed with error -2
[ 13.635828] ath10k_pci 0000:01:00.0: Falling back to user helper
[ 13.776735] firmware ath10k!QCA988X!hw2.0!ct-firmware-2.bin: firmware_loading_store: map pages failed
[ 13.786367] ath10k_pci 0000:01:00.0: Direct firmware load for ath10k/QCA988X/hw2.0/firmware-6.bin failed with error -2
[ 13.797254] ath10k_pci 0000:01:00.0: Falling back to user helper
[ 13.938738] firmware ath10k!QCA988X!hw2.0!firmware-6.bin: firmware_loading_store: map pages failed
[ 13.948112] ath10k_pci 0000:01:00.0: Direct firmware load for ath10k/QCA988X/hw2.0/firmware-5.bin failed with error -2
[ 13.959000] ath10k_pci 0000:01:00.0: Falling back to user helper
[ 14.099763] firmware ath10k!QCA988X!hw2.0!firmware-5.bin: firmware_loading_store: map pages failed
[ 14.109124] ath10k_pci 0000:01:00.0: Direct firmware load for ath10k/QCA988X/hw2.0/firmware-4.bin failed with error -2
[ 14.120012] ath10k_pci 0000:01:00.0: Falling back to user helper
[ 14.261884] firmware ath10k!QCA988X!hw2.0!firmware-4.bin: firmware_loading_store: map pages failed
[ 14.271202] ath10k_pci 0000:01:00.0: Direct firmware load for ath10k/QCA988X/hw2.0/firmware-3.bin failed with error -2
[ 14.282086] ath10k_pci 0000:01:00.0: Falling back to user helper
[ 14.422969] firmware ath10k!QCA988X!hw2.0!firmware-3.bin: firmware_loading_store: map pages failed
[ 14.435929] ath10k_pci 0000:01:00.0: qca988x hw2.0 target 0x4100016c chip_id 0x043202ff sub 0000:0000
[ 14.445331] ath10k_pci 0000:01:00.0: kconfig debug 0 debugfs 1 tracing 0 dfs 1 testmode 0
[ 14.457737] ath10k_pci 0000:01:00.0: firmware ver 10.1-ct-8x-__fW-022-64cc8007 api 2 features wmi-10.x,has-wmi-mgmt-tx,mfp,txstatus-noack,wmi-10.x-CT,ratemask-CT,txrate-CT,get-temp-CT,tx-rc-CT,cust-stats-CT,retry-gt2-CT,txrate2-CT,beacon-cb-CT,wmi-block-ack-CT crc32 156478f0
[ 14.569243] ath10k_pci 0000:01:00.0: Direct firmware load for ath10k/QCA988X/hw2.0/board-2.bin failed with error -2
[ 14.579881] ath10k_pci 0000:01:00.0: Falling back to user helper
[ 14.657585] firmware ath10k!QCA988X!hw2.0!board-2.bin: firmware_loading_store: map pages failed
[ 14.688898] ath10k_pci 0000:01:00.0: board_file api 1 bmi_id N/A crc32 bebc7c08
[ 15.964494] ath10k_pci 0000:01:00.0: 10.1 wmi init: vdevs: 16 peers: 127 tid: 256
[ 15.981266] ath10k_pci 0000:01:00.0: wmi print 'P 128 V 8 T 410'
[ 15.987606] ath10k_pci 0000:01:00.0: wmi print 'msdu-desc: 1424 sw-crypt: 0 ct-sta: 0'
[ 15.995749] ath10k_pci 0000:01:00.0: wmi print 'alloc rem: 20904 iram: 26072'
[ 16.058310] ath10k_pci 0000:01:00.0: htt-ver 2.1 wmi-op 2 htt-op 2 cal file max-sta 128 raw 0 hwcrypto 1
[ 16.071137] ath10k_pci 0000:01:00.0: NOTE: Firmware DBGLOG output disabled in debug_mask: 0x10000000
[ 16.204315] ath: EEPROM regdomain: 0x0
[ 16.204322] ath: EEPROM indicates default country code should be used
[ 16.204325] ath: doing EEPROM country->regdmn map search
[ 16.204337] ath: country maps to regdmn code: 0x3a
[ 16.204342] ath: Country alpha2 being used: US
[ 16.204345] ath: Regpair used: 0x3a
[ 16.264915] ath: EEPROM regdomain: 0x0
[ 16.264923] ath: EEPROM indicates default country code should be used
[ 16.264926] ath: doing EEPROM country->regdmn map search
[ 16.264938] ath: country maps to regdmn code: 0x3a
[ 16.264943] ath: Country alpha2 being used: US
[ 16.264946] ath: Regpair used: 0x3a
[ 16.282830] ieee80211 phy1: Selected rate control algorithm 'minstrel_ht'
[ 16.284467] ieee80211 phy1: Atheros AR9550 Rev:0 mem=0xb8100000, irq=47
[ 16.352357] kmodloader: done loading kernel modules from /etc/modules.d/*
[ 27.114332] eth1: link up (1000Mbps/Full duplex)
[ 27.119093] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
[ 27.158349] br-lan: port 1(eth1.1) entered blocking state
[ 27.163872] br-lan: port 1(eth1.1) entered disabled state
[ 27.169604] device eth1.1 entered promiscuous mode
[ 27.174514] device eth1 entered promiscuous mode
[ 27.251827] br-lan: port 1(eth1.1) entered blocking state
[ 27.257317] br-lan: port 1(eth1.1) entered forwarding state
[ 27.263153] IPv6: ADDRCONF(NETDEV_UP): br-lan: link is not ready
[ 27.338597] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 27.381584] device eth0 entered promiscuous mode
[ 27.386365] IPv6: ADDRCONF(NETDEV_UP): eth0.2: link is not ready
[ 28.121557] IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
[ 28.128432] IPv6: ADDRCONF(NETDEV_CHANGE): br-lan: link becomes ready
[ 28.362967] eth0: link up (1000Mbps/Full duplex)
[ 28.367796] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 28.421613] IPv6: ADDRCONF(NETDEV_CHANGE): eth0.2: link becomes ready
[ 29.721348] ath: EEPROM regdomain: 0x8324
[ 29.725456] ath: EEPROM indicates we should expect a country code
[ 29.731654] ath: doing EEPROM country->regdmn map search
[ 29.737036] ath: country maps to regdmn code: 0x3e
[ 29.741908] ath: Country alpha2 being used: UA
[ 29.746415] ath: Regpair used: 0x3e
[ 29.749954] ath: regdomain 0x8324 dynamically updated by user
[ 29.755867] ath: EEPROM regdomain: 0x8324
[ 29.759931] ath: EEPROM indicates we should expect a country code
[ 29.766132] ath: doing EEPROM country->regdmn map search
[ 29.771529] ath: country maps to regdmn code: 0x3e
[ 29.776388] ath: Country alpha2 being used: UA
[ 29.780893] ath: Regpair used: 0x3e
[ 29.784447] ath: regdomain 0x8324 dynamically updated by user
[ 32.102710] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[ 33.138056] ath10k_pci 0000:01:00.0: 10.1 wmi init: vdevs: 16 peers: 127 tid: 256
[ 33.154824] ath10k_pci 0000:01:00.0: wmi print 'P 128 V 8 T 410'
[ 33.161137] ath10k_pci 0000:01:00.0: wmi print 'msdu-desc: 1424 sw-crypt: 0 ct-sta: 0'
[ 33.169307] ath10k_pci 0000:01:00.0: wmi print 'alloc rem: 20904 iram: 26072'
[ 33.237518] ath10k_pci 0000:01:00.0: pdev param 0 not supported by firmware
[ 33.252465] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 33.258790] br-lan: port 2(wlan1) entered blocking state
[ 33.264235] br-lan: port 2(wlan1) entered disabled state
[ 33.269896] device wlan1 entered promiscuous mode
[ 33.279402] br-lan: port 3(wlan0) entered blocking state
[ 33.284857] br-lan: port 3(wlan0) entered disabled state
[ 33.290518] device wlan0 entered promiscuous mode
[ 33.321361] ath: EEPROM regdomain: 0x8348
[ 33.325480] ath: EEPROM indicates we should expect a country code
[ 33.331687] ath: doing EEPROM country->regdmn map search
[ 33.337071] ath: country maps to regdmn code: 0x3a
[ 33.341946] ath: Country alpha2 being used: US
[ 33.346450] ath: Regpair used: 0x3a
[ 33.349990] ath: regdomain 0x8348 dynamically updated by user
[ 33.355923] ath: EEPROM regdomain: 0x8348
[ 33.359984] ath: EEPROM indicates we should expect a country code
[ 33.366186] ath: doing EEPROM country->regdmn map search
[ 33.371583] ath: country maps to regdmn code: 0x3a
[ 33.376448] ath: Country alpha2 being used: US
[ 33.380945] ath: Regpair used: 0x3a
[ 33.384493] ath: regdomain 0x8348 dynamically updated by user
[ 33.491392] ath: EEPROM regdomain: 0x8324
[ 33.495499] ath: EEPROM indicates we should expect a country code
[ 33.501786] ath: doing EEPROM country->regdmn map search
[ 33.507176] ath: country maps to regdmn code: 0x3e
[ 33.512061] ath: Country alpha2 being used: UA
[ 33.516579] ath: Regpair used: 0x3e
[ 33.520112] ath: regdomain 0x8324 dynamically updated by user
[ 33.526111] ath: EEPROM regdomain: 0x8324
[ 33.530177] ath: EEPROM indicates we should expect a country code
[ 33.536388] ath: doing EEPROM country->regdmn map search
[ 33.541792] ath: country maps to regdmn code: 0x3e
[ 33.546650] ath: Country alpha2 being used: UA
[ 33.551155] ath: Regpair used: 0x3e
[ 33.554702] ath: regdomain 0x8324 dynamically updated by user
[ 40.451496] IPv6: ADDRCONF(NETDEV_CHANGE): wlan1: link becomes ready
[ 40.458174] br-lan: port 2(wlan1) entered blocking state
[ 40.463613] br-lan: port 2(wlan1) entered forwarding state
[ 45.823947] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 45.830702] br-lan: port 3(wlan0) entered blocking state
[ 45.836153] br-lan: port 3(wlan0) entered forwarding state

@openwrt-bot
Copy link
Author

tarask1n:

Low throughput on download link detected. System log contains enormous quantity of followed messages:

Thu Dec 5 07:12:08 2019 daemon.info hostapd: wlan0: STA 38:de:ad:a1:af:0e RADIUS: starting accounting session 6D20D84772A5FFF2 Thu Dec 5 07:12:08 2019 daemon.info hostapd: wlan0: STA 38:de:ad:a1:af:0e WPA: pairwise key handshake completed (RSN) Thu Dec 5 07:12:08 2019 daemon.info dnsmasq-dhcp[1888]: DHCPREQUEST(br-lan) 192.168.3.145 38:de:ad:a1:af:0e Thu Dec 5 07:12:08 2019 daemon.info dnsmasq-dhcp[1888]: DHCPACK(br-lan) 192.168.3.145 38:de:ad:a1:af:0e DESKTOP-D1ONF16 Thu Dec 5 07:12:08 2019 daemon.notice hostapd: wlan0: AP-STA-DISCONNECTED 38:de:ad:a1:af:0e Thu Dec 5 07:12:08 2019 daemon.info hostapd: wlan0: STA 38:de:ad:a1:af:0e IEEE 802.11: authenticated Thu Dec 5 07:12:08 2019 daemon.info hostapd: wlan0: STA 38:de:ad:a1:af:0e IEEE 802.11: associated (aid 1) Thu Dec 5 07:12:08 2019 daemon.notice hostapd: wlan0: STA-OPMODE-SMPS-MODE-CHANGED 38:de:ad:a1:af:0e off Thu Dec 5 07:12:08 2019 daemon.notice hostapd: wlan0: AP-STA-CONNECTED 38:de:ad:a1:af:0e Thu Dec 5 07:12:08 2019 daemon.info hostapd: wlan0: STA 38:de:ad:a1:af:0e RADIUS: starting accounting session C14FFEA837AEB96A Thu Dec 5 07:12:08 2019 daemon.info hostapd: wlan0: STA 38:de:ad:a1:af:0e WPA: pairwise key handshake completed (RSN) Thu Dec 5 07:12:08 2019 daemon.info dnsmasq-dhcp[1888]: DHCPREQUEST(br-lan) 192.168.3.145 38:de:ad:a1:af:0e Thu Dec 5 07:12:08 2019 daemon.info dnsmasq-dhcp[1888]: DHCPACK(br-lan) 192.168.3.145 38:de:ad:a1:af:0e DESKTOP-D1ONF16 Thu Dec 5 07:12:09 2019 daemon.notice hostapd: wlan0: AP-STA-DISCONNECTED 38:de:ad:a1:af:0e Thu Dec 5 07:12:09 2019 daemon.info hostapd: wlan0: STA 38:de:ad:a1:af:0e IEEE 802.11: authenticated Thu Dec 5 07:12:09 2019 daemon.info hostapd: wlan0: STA 38:de:ad:a1:af:0e IEEE 802.11: associated (aid 1) Thu Dec 5 07:12:09 2019 daemon.notice hostapd: wlan0: STA-OPMODE-SMPS-MODE-CHANGED 38:de:ad:a1:af:0e off Thu Dec 5 07:12:09 2019 daemon.notice hostapd: wlan0: AP-STA-CONNECTED 38:de:ad:a1:af:0e Thu Dec 5 07:12:09 2019 daemon.info hostapd: wlan0: STA 38:de:ad:a1:af:0e RADIUS: starting accounting session 9EAAE4D3D04D5957 Thu Dec 5 07:12:09 2019 daemon.info hostapd: wlan0: STA 38:de:ad:a1:af:0e WPA: pairwise key handshake completed (RSN) Thu Dec 5 07:12:09 2019 daemon.info dnsmasq-dhcp[1888]: DHCPREQUEST(br-lan) 192.168.3.145 38:de:ad:a1:af:0e Thu Dec 5 07:12:09 2019 daemon.info dnsmasq-dhcp[1888]: DHCPACK(br-lan) 192.168.3.145 38:de:ad:a1:af:0e DESKTOP-D1ONF16 Thu Dec 5 07:12:09 2019 daemon.notice hostapd: wlan0: AP-STA-DISCONNECTED 38:de:ad:a1:af:0e Thu Dec 5 07:12:09 2019 daemon.info hostapd: wlan0: STA 38:de:ad:a1:af:0e IEEE 802.11: authenticated Thu Dec 5 07:12:09 2019 daemon.info hostapd: wlan0: STA 38:de:ad:a1:af:0e IEEE 802.11: associated (aid 1) Thu Dec 5 07:12:09 2019 daemon.notice hostapd: wlan0: STA-OPMODE-SMPS-MODE-CHANGED 38:de:ad:a1:af:0e off Thu Dec 5 07:12:09 2019 daemon.notice hostapd: wlan0: AP-STA-CONNECTED 38:de:ad:a1:af:0e Thu Dec 5 07:12:09 2019 daemon.info hostapd: wlan0: STA 38:de:ad:a1:af:0e RADIUS: starting accounting session 0029460DD439A555 Thu Dec 5 07:12:09 2019 daemon.info hostapd: wlan0: STA 38:de:ad:a1:af:0e WPA: pairwise key handshake completed (RSN) Thu Dec 5 07:12:09 2019 daemon.info dnsmasq-dhcp[1888]: DHCPREQUEST(br-lan) 192.168.3.145 38:de:ad:a1:af:0e Thu Dec 5 07:12:09 2019 daemon.info dnsmasq-dhcp[1888]: DHCPACK(br-lan) 192.168.3.145 38:de:ad:a1:af:0e DESKTOP-D1ONF16 Thu Dec 5 07:12:09 2019 daemon.notice hostapd: wlan0: AP-STA-DISCONNECTED 38:de:ad:a1:af:0e Thu Dec 5 07:12:10 2019 daemon.info hostapd: wlan0: STA 38:de:ad:a1:af:0e IEEE 802.11: authenticated Thu Dec 5 07:12:10 2019 daemon.info hostapd: wlan0: STA 38:de:ad:a1:af:0e IEEE 802.11: associated (aid 1) Thu Dec 5 07:12:10 2019 daemon.notice hostapd: wlan0: STA-OPMODE-SMPS-MODE-CHANGED 38:de:ad:a1:af:0e off Thu Dec 5 07:12:10 2019 daemon.notice hostapd: wlan0: AP-STA-CONNECTED 38:de:ad:a1:af:0e Thu Dec 5 07:12:10 2019 daemon.info hostapd: wlan0: STA 38:de:ad:a1:af:0e RADIUS: starting accounting session 69D5BAE319925A02 Thu Dec 5 07:12:10 2019 daemon.info hostapd: wlan0: STA 38:de:ad:a1:af:0e WPA: pairwise key handshake completed (RSN) Thu Dec 5 07:12:10 2019 daemon.info dnsmasq-dhcp[1888]: DHCPREQUEST(br-lan) 192.168.3.145 38:de:ad:a1:af:0e Thu Dec 5 07:12:10 2019 daemon.info dnsmasq-dhcp[1888]: DHCPACK(br-lan) 192.168.3.145 38:de:ad:a1:af:0e DESKTOP-D1ONF16 Thu Dec 5 07:12:10 2019 daemon.notice hostapd: wlan0: AP-STA-DISCONNECTED 38:de:ad:a1:af:0e Thu Dec 5 07:12:10 2019 daemon.info hostapd: wlan0: STA 38:de:ad:a1:af:0e IEEE 802.11: authenticated Thu Dec 5 07:12:10 2019 daemon.info hostapd: wlan0: STA 38:de:ad:a1:af:0e IEEE 802.11: associated (aid 1) Thu Dec 5 07:12:10 2019 daemon.notice hostapd: wlan0: STA-OPMODE-SMPS-MODE-CHANGED 38:de:ad:a1:af:0e off Thu Dec 5 07:12:10 2019 daemon.notice hostapd: wlan0: AP-STA-CONNECTED 38:de:ad:a1:af:0e Thu Dec 5 07:12:10 2019 daemon.info hostapd: wlan0: STA 38:de:ad:a1:af:0e RADIUS: starting accounting session 63EDBC6918167D57 Thu Dec 5 07:12:10 2019 daemon.info hostapd: wlan0: STA 38:de:ad:a1:af:0e WPA: pairwise key handshake completed (RSN) Thu Dec 5 07:12:10 2019 daemon.info dnsmasq-dhcp[1888]: DHCPREQUEST(br-lan) 192.168.3.145 38:de:ad:a1:af:0e Thu Dec 5 07:12:10 2019 daemon.info dnsmasq-dhcp[1888]: DHCPACK(br-lan) 192.168.3.145 38:de:ad:a1:af:0e DESKTOP-D1ONF16

@openwrt-bot
Copy link
Author

bjonglez:

For the performance issue, this is a duplicate of FS#2563

Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment
Labels
Projects
None yet
Development

No branches or pull requests

1 participant