You signed in with another tab or window. Reload to refresh your session.You signed out in another tab or window. Reload to refresh your session.You switched accounts on another tab or window. Reload to refresh your session.Dismiss alert
When I enable 2.4GHz and disable 5GHz (via uci), and reboot, then both wlan0 (2.4GHz) and wlan1 (5GHz) interface exist on ip link list, but only wlan0 is up and wlan1 is in down state.
In this situation, wlan0 does not work at all. AP SSID can not be found, and iw dev wlan0 scan returns no result.
But when I enable wlan1, or disable it again to make wlan1 completely disappear on ip link list, then wlan0 becomes functional without any problem.
right after boot, wlan0 on, wlan1 off: wlan0 fails, network restart doen't make any difference
right after boot, wlan0 on, wlan1 on: no problem
wlan0 on, wlan1 off->on, network reload: no problem
wlan0 on, wlan1 on->off, network reload: no problem
I found this behavior on 15.05.1, 17.01.6, 18.06.4, and snapshot.
mans0n:
When I enable 2.4GHz and disable 5GHz (via uci), and reboot, then both wlan0 (2.4GHz) and wlan1 (5GHz) interface exist on
ip link
list, but only wlan0 is up and wlan1 is in down state.In this situation, wlan0 does not work at all. AP SSID can not be found, and
iw dev wlan0 scan
returns no result.But when I enable wlan1, or disable it again to make wlan1 completely disappear on
ip link
list, then wlan0 becomes functional without any problem.right after boot, wlan0 on, wlan1 off: wlan0 fails, network restart doen't make any difference
right after boot, wlan0 on, wlan1 on: no problem
wlan0 on, wlan1 off->on, network reload: no problem
wlan0 on, wlan1 on->off, network reload: no problem
I found this behavior on 15.05.1, 17.01.6, 18.06.4, and snapshot.
There's a thread on the forum reporting 2.4GHz radio problem. Maybe same bug?
https://forum.openwrt.org/t/samsung-cy-swr1100-radios-are-not-working-even-after-enabled-please-help/13114
The text was updated successfully, but these errors were encountered: