Skip to content
New issue

Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.

By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.

Already on GitHub? Sign in to your account

FS#2558 - Linksys 3200ACM drops link speed from 800 Mbs to 19.5 Mbs #7335

Open
openwrt-bot opened this issue Oct 21, 2019 · 2 comments
Open
Labels

Comments

@openwrt-bot
Copy link

ByteEnable:

Linksys 3200ACM drops link speed from 800 Mbs to 19.5 Mbs in about 5 minutes. If I disconnect the WiFi connection from the phone I am unable to reconnect. I have to reboot Openwrt.

Radio1 and radio2 are disabled. FYI, stock FW has no issues with WiFi.

@openwrt-bot
Copy link
Author

ByteEnable:

Drops to 19.5 Mbs

Wireless Overview
radio0
Marvell 88W8964 802.11nac
Channel: 149 (5.745 GHz) | Bitrate: 19.5 Mbit/s

Associated Stations
Network
MAC-Address
Host
Signal / Noise
RX Rate / TX Rate
Master "ByteEnable5G" (wlan0)
00:9D:6B:0B:D9:24
ByteEnableS9.lan (192.168.1.184)
-54 / -96 dBm
156.0 Mbit/s, 20MHz, VHT-MCS 8, VHT-NSS 2
19.5 Mbit/s, 20MHz, VHT-MCS 2, VHT-NSS 1

@openwrt-bot
Copy link
Author

ByteEnable:

I was able to recover by removing the config using the following commands:

rm -f /etc/config/wireless
wifi config > /etc/config/wireless
reboot

I have isolated it down to the channel. If I set the channel to "Auto" it fails to work. If leave the channel set to "36(5180)" it works.

radio0
Marvell 88W8964 802.11nac
Channel: 36 (5.180 GHz) | Bitrate: 866.7 Mbit/s

78%
SSID: ByteEnable5G | Mode: Master
BSSID: 60:38:E0:B3:8A:6A | Encryption: WPA2 PSK (CCMP)

Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment
Labels
Projects
None yet
Development

No branches or pull requests

1 participant