We read every piece of feedback, and take your input very seriously.
To see all available qualifiers, see our documentation.
Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.
By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.
Already on GitHub? Sign in to your account
LinuxKernel1:
Device: Netgear EX2700
Version: OpenWrt 19.07-SNAPSHOT r10532-cf3b50377e / LuCI openwrt-19.07 branch (git-19.256.45060-8a2f1c7)
Steps to reproduce: Enable WPA3 or WPA3-Mixed Mode via LuCI.
Result: Wifi won't come up. Works fine with WPA2. Sun Sep 15 20:08:18 2019 kern.info kernel: [ 1638.740004] device wlan0 left promiscuous mode Sun Sep 15 20:08:18 2019 kern.info kernel: [ 1638.740123] br-lan: port 2(wlan0) entered disabled state Sun Sep 15 20:08:18 2019 daemon.notice hostapd: wlan0: interface state ENABLED->DISABLED Sun Sep 15 20:08:18 2019 daemon.notice hostapd: wlan0-1: AP-DISABLED Sun Sep 15 20:08:18 2019 daemon.notice hostapd: wlan0-1: CTRL-EVENT-TERMINATING Sun Sep 15 20:08:18 2019 daemon.notice netifd: Network device 'wlan0-1' link is down Sun Sep 15 20:08:19 2019 kern.info kernel: [ 1639.020561] br-guest: port 2(wlan0-1) entered disabled state Sun Sep 15 20:08:19 2019 kern.info kernel: [ 1639.023338] device wlan0-1 left promiscuous mode Sun Sep 15 20:08:19 2019 kern.info kernel: [ 1639.023357] br-guest: port 2(wlan0-1) entered disabled state Sun Sep 15 20:08:19 2019 daemon.notice hostapd: nl80211: Failed to remove interface wlan0-1 from bridge br-guest: No such device Sun Sep 15 20:08:19 2019 daemon.notice hostapd: wlan0: AP-DISABLED Sun Sep 15 20:08:19 2019 daemon.notice hostapd: wlan0: CTRL-EVENT-TERMINATING Sun Sep 15 20:08:19 2019 daemon.notice hostapd: nl80211: deinit ifname=wlan0 disabled_11b_rates=0 Sun Sep 15 20:08:19 2019 daemon.notice hostapd: nl80211: Failed to remove interface wlan0 from bridge br-lan: Invalid argument Sun Sep 15 20:08:19 2019 user.notice mac80211: Failed command: iw phy phy0 set antenna 0xffffffff 0xffffffff Sun Sep 15 20:08:19 2019 daemon.notice netifd: radio0 (1867): command failed: Not supported (-122) Sun Sep 15 20:08:19 2019 user.notice mac80211: Failed command: iw phy phy0 set distance 0 Sun Sep 15 20:08:19 2019 daemon.err hostapd: Configuration file: /var/run/hostapd-phy0.conf Sun Sep 15 20:08:21 2019 kern.info kernel: [ 1639.912716] ieee80211 phy0: rt2800_rf_self_txdc_cal: Info - RF Tx self calibration start Sun Sep 15 20:08:21 2019 kern.info kernel: [ 1639.913245] ieee80211 phy0: rt2800_rf_self_txdc_cal: Info - RF Tx self calibration end Sun Sep 15 20:08:22 2019 kern.info kernel: [ 1641.824164] ieee80211 phy0: rt2800_loft_iq_calibration: Info - LOFT Calibration Done! Sun Sep 15 20:08:22 2019 kern.info kernel: [ 1641.828164] ieee80211 phy0: rt2800_iq_search: Info - IQCalibration Start! Sun Sep 15 20:08:22 2019 kern.info kernel: [ 1641.842569] ieee80211 phy0: rt2800_iq_search: Info - IQCalibration Done! CH = 0, (gain= 0, phase=3f) Sun Sep 15 20:08:22 2019 kern.info kernel: [ 1641.843488] ieee80211 phy0: rt2800_iq_search: Info - IQCalibration Start! Sun Sep 15 20:08:22 2019 kern.info kernel: [ 1641.857895] ieee80211 phy0: rt2800_iq_search: Info - IQCalibration Done! CH = 1, (gain= 0, phase= 2) Sun Sep 15 20:08:22 2019 kern.info kernel: [ 1641.857931] ieee80211 phy0: rt2800_loft_iq_calibration: Info - TX IQ Calibration Done! Sun Sep 15 20:08:22 2019 kern.info kernel: [ 1641.871433] ieee80211 phy0: rt2800_rxiq_calibration: Info - RXIQ G_imb=1, Ph_rx=-6 Sun Sep 15 20:08:22 2019 kern.info kernel: [ 1641.881694] ieee80211 phy0: rt2800_rxiq_calibration: Info - RXIQ G_imb=0, Ph_rx=2 Sun Sep 15 20:08:22 2019 kern.info kernel: [ 1641.888849] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready Sun Sep 15 20:08:22 2019 kern.info kernel: [ 1641.894441] br-lan: port 2(wlan0) entered blocking state Sun Sep 15 20:08:22 2019 kern.info kernel: [ 1641.894456] br-lan: port 2(wlan0) entered disabled state Sun Sep 15 20:08:22 2019 kern.info kernel: [ 1641.894799] device wlan0 entered promiscuous mode Sun Sep 15 20:08:22 2019 daemon.notice hostapd: wlan0: interface state UNINITIALIZED->COUNTRY_UPDATE Sun Sep 15 20:08:22 2019 daemon.err hostapd: Using interface wlan0 with hwaddr XX:XX:XX:XX:XX:XX and ssid "HOME" Sun Sep 15 20:08:22 2019 daemon.err hostapd: Interface initialization failed Sun Sep 15 20:08:22 2019 daemon.notice hostapd: wlan0: interface state COUNTRY_UPDATE->DISABLED Sun Sep 15 20:08:22 2019 kern.info kernel: [ 1641.994731] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready Sun Sep 15 20:08:22 2019 kern.info kernel: [ 1641.994904] br-lan: port 2(wlan0) entered blocking state Sun Sep 15 20:08:22 2019 kern.info kernel: [ 1641.994914] br-lan: port 2(wlan0) entered forwarding state Sun Sep 15 20:08:22 2019 daemon.notice hostapd: wlan0: AP-DISABLED Sun Sep 15 20:08:22 2019 daemon.err hostapd: wlan0: Unable to setup interface. Sun Sep 15 20:08:22 2019 daemon.notice hostapd: wlan0: interface state DISABLED->DISABLED Sun Sep 15 20:08:22 2019 daemon.notice hostapd: wlan0-1: AP-DISABLED Sun Sep 15 20:08:22 2019 daemon.notice hostapd: wlan0-1: CTRL-EVENT-TERMINATING Sun Sep 15 20:08:22 2019 daemon.err hostapd: hostapd_free_hapd_data: Interface wlan0-1 wasn't started Sun Sep 15 20:08:22 2019 daemon.notice hostapd: wlan0: AP-DISABLED Sun Sep 15 20:08:22 2019 daemon.notice hostapd: wlan0: CTRL-EVENT-TERMINATING Sun Sep 15 20:08:22 2019 daemon.err hostapd: hostapd_free_hapd_data: Interface wlan0 wasn't started Sun Sep 15 20:08:22 2019 daemon.notice hostapd: nl80211: deinit ifname=wlan0 disabled_11b_rates=0 Sun Sep 15 20:08:22 2019 kern.info kernel: [ 1642.002616] device wlan0 left promiscuous mode Sun Sep 15 20:08:22 2019 kern.info kernel: [ 1642.002723] br-lan: port 2(wlan0) entered disabled state Sun Sep 15 20:08:22 2019 daemon.notice hostapd: ELOOP: remaining socket: sock=22 eloop_data=0x77d76c60 user_data=0 handler=0x46a4f5 Sun Sep 15 20:08:22 2019 daemon.notice netifd: radio0 (1867): WARNING (wireless_add_process): executable path /usr/sbin/wpad does not match process 1120 path () Sun Sep 15 20:08:22 2019 daemon.notice netifd: radio0 (1867): Device setup failed: HOSTAPD_START_FAILED
Sun Sep 15 20:08:18 2019 kern.info kernel: [ 1638.740004] device wlan0 left promiscuous mode Sun Sep 15 20:08:18 2019 kern.info kernel: [ 1638.740123] br-lan: port 2(wlan0) entered disabled state Sun Sep 15 20:08:18 2019 daemon.notice hostapd: wlan0: interface state ENABLED->DISABLED Sun Sep 15 20:08:18 2019 daemon.notice hostapd: wlan0-1: AP-DISABLED Sun Sep 15 20:08:18 2019 daemon.notice hostapd: wlan0-1: CTRL-EVENT-TERMINATING Sun Sep 15 20:08:18 2019 daemon.notice netifd: Network device 'wlan0-1' link is down Sun Sep 15 20:08:19 2019 kern.info kernel: [ 1639.020561] br-guest: port 2(wlan0-1) entered disabled state Sun Sep 15 20:08:19 2019 kern.info kernel: [ 1639.023338] device wlan0-1 left promiscuous mode Sun Sep 15 20:08:19 2019 kern.info kernel: [ 1639.023357] br-guest: port 2(wlan0-1) entered disabled state Sun Sep 15 20:08:19 2019 daemon.notice hostapd: nl80211: Failed to remove interface wlan0-1 from bridge br-guest: No such device Sun Sep 15 20:08:19 2019 daemon.notice hostapd: wlan0: AP-DISABLED Sun Sep 15 20:08:19 2019 daemon.notice hostapd: wlan0: CTRL-EVENT-TERMINATING Sun Sep 15 20:08:19 2019 daemon.notice hostapd: nl80211: deinit ifname=wlan0 disabled_11b_rates=0 Sun Sep 15 20:08:19 2019 daemon.notice hostapd: nl80211: Failed to remove interface wlan0 from bridge br-lan: Invalid argument Sun Sep 15 20:08:19 2019 user.notice mac80211: Failed command: iw phy phy0 set antenna 0xffffffff 0xffffffff Sun Sep 15 20:08:19 2019 daemon.notice netifd: radio0 (1867): command failed: Not supported (-122) Sun Sep 15 20:08:19 2019 user.notice mac80211: Failed command: iw phy phy0 set distance 0 Sun Sep 15 20:08:19 2019 daemon.err hostapd: Configuration file: /var/run/hostapd-phy0.conf Sun Sep 15 20:08:21 2019 kern.info kernel: [ 1639.912716] ieee80211 phy0: rt2800_rf_self_txdc_cal: Info - RF Tx self calibration start Sun Sep 15 20:08:21 2019 kern.info kernel: [ 1639.913245] ieee80211 phy0: rt2800_rf_self_txdc_cal: Info - RF Tx self calibration end Sun Sep 15 20:08:22 2019 kern.info kernel: [ 1641.824164] ieee80211 phy0: rt2800_loft_iq_calibration: Info - LOFT Calibration Done! Sun Sep 15 20:08:22 2019 kern.info kernel: [ 1641.828164] ieee80211 phy0: rt2800_iq_search: Info - IQCalibration Start! Sun Sep 15 20:08:22 2019 kern.info kernel: [ 1641.842569] ieee80211 phy0: rt2800_iq_search: Info - IQCalibration Done! CH = 0, (gain= 0, phase=3f) Sun Sep 15 20:08:22 2019 kern.info kernel: [ 1641.843488] ieee80211 phy0: rt2800_iq_search: Info - IQCalibration Start! Sun Sep 15 20:08:22 2019 kern.info kernel: [ 1641.857895] ieee80211 phy0: rt2800_iq_search: Info - IQCalibration Done! CH = 1, (gain= 0, phase= 2) Sun Sep 15 20:08:22 2019 kern.info kernel: [ 1641.857931] ieee80211 phy0: rt2800_loft_iq_calibration: Info - TX IQ Calibration Done! Sun Sep 15 20:08:22 2019 kern.info kernel: [ 1641.871433] ieee80211 phy0: rt2800_rxiq_calibration: Info - RXIQ G_imb=1, Ph_rx=-6 Sun Sep 15 20:08:22 2019 kern.info kernel: [ 1641.881694] ieee80211 phy0: rt2800_rxiq_calibration: Info - RXIQ G_imb=0, Ph_rx=2 Sun Sep 15 20:08:22 2019 kern.info kernel: [ 1641.888849] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready Sun Sep 15 20:08:22 2019 kern.info kernel: [ 1641.894441] br-lan: port 2(wlan0) entered blocking state Sun Sep 15 20:08:22 2019 kern.info kernel: [ 1641.894456] br-lan: port 2(wlan0) entered disabled state Sun Sep 15 20:08:22 2019 kern.info kernel: [ 1641.894799] device wlan0 entered promiscuous mode Sun Sep 15 20:08:22 2019 daemon.notice hostapd: wlan0: interface state UNINITIALIZED->COUNTRY_UPDATE Sun Sep 15 20:08:22 2019 daemon.err hostapd: Using interface wlan0 with hwaddr XX:XX:XX:XX:XX:XX and ssid "HOME" Sun Sep 15 20:08:22 2019 daemon.err hostapd: Interface initialization failed Sun Sep 15 20:08:22 2019 daemon.notice hostapd: wlan0: interface state COUNTRY_UPDATE->DISABLED Sun Sep 15 20:08:22 2019 kern.info kernel: [ 1641.994731] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready Sun Sep 15 20:08:22 2019 kern.info kernel: [ 1641.994904] br-lan: port 2(wlan0) entered blocking state Sun Sep 15 20:08:22 2019 kern.info kernel: [ 1641.994914] br-lan: port 2(wlan0) entered forwarding state Sun Sep 15 20:08:22 2019 daemon.notice hostapd: wlan0: AP-DISABLED Sun Sep 15 20:08:22 2019 daemon.err hostapd: wlan0: Unable to setup interface. Sun Sep 15 20:08:22 2019 daemon.notice hostapd: wlan0: interface state DISABLED->DISABLED Sun Sep 15 20:08:22 2019 daemon.notice hostapd: wlan0-1: AP-DISABLED Sun Sep 15 20:08:22 2019 daemon.notice hostapd: wlan0-1: CTRL-EVENT-TERMINATING Sun Sep 15 20:08:22 2019 daemon.err hostapd: hostapd_free_hapd_data: Interface wlan0-1 wasn't started Sun Sep 15 20:08:22 2019 daemon.notice hostapd: wlan0: AP-DISABLED Sun Sep 15 20:08:22 2019 daemon.notice hostapd: wlan0: CTRL-EVENT-TERMINATING Sun Sep 15 20:08:22 2019 daemon.err hostapd: hostapd_free_hapd_data: Interface wlan0 wasn't started Sun Sep 15 20:08:22 2019 daemon.notice hostapd: nl80211: deinit ifname=wlan0 disabled_11b_rates=0 Sun Sep 15 20:08:22 2019 kern.info kernel: [ 1642.002616] device wlan0 left promiscuous mode Sun Sep 15 20:08:22 2019 kern.info kernel: [ 1642.002723] br-lan: port 2(wlan0) entered disabled state Sun Sep 15 20:08:22 2019 daemon.notice hostapd: ELOOP: remaining socket: sock=22 eloop_data=0x77d76c60 user_data=0 handler=0x46a4f5 Sun Sep 15 20:08:22 2019 daemon.notice netifd: radio0 (1867): WARNING (wireless_add_process): executable path /usr/sbin/wpad does not match process 1120 path () Sun Sep 15 20:08:22 2019 daemon.notice netifd: radio0 (1867): Device setup failed: HOSTAPD_START_FAILED
The text was updated successfully, but these errors were encountered:
LGA1150:
MT7620 does not use mt76 driver. It uses rt2800-soc instead.
Sorry, something went wrong.
No branches or pull requests
LinuxKernel1:
Device: Netgear EX2700
Version: OpenWrt 19.07-SNAPSHOT r10532-cf3b50377e / LuCI openwrt-19.07 branch (git-19.256.45060-8a2f1c7)
Steps to reproduce: Enable WPA3 or WPA3-Mixed Mode via LuCI.
Result:
Wifi won't come up. Works fine with WPA2.
Sun Sep 15 20:08:18 2019 kern.info kernel: [ 1638.740004] device wlan0 left promiscuous mode
Sun Sep 15 20:08:18 2019 kern.info kernel: [ 1638.740123] br-lan: port 2(wlan0) entered disabled state
Sun Sep 15 20:08:18 2019 daemon.notice hostapd: wlan0: interface state ENABLED->DISABLED
Sun Sep 15 20:08:18 2019 daemon.notice hostapd: wlan0-1: AP-DISABLED
Sun Sep 15 20:08:18 2019 daemon.notice hostapd: wlan0-1: CTRL-EVENT-TERMINATING
Sun Sep 15 20:08:18 2019 daemon.notice netifd: Network device 'wlan0-1' link is down
Sun Sep 15 20:08:19 2019 kern.info kernel: [ 1639.020561] br-guest: port 2(wlan0-1) entered disabled state
Sun Sep 15 20:08:19 2019 kern.info kernel: [ 1639.023338] device wlan0-1 left promiscuous mode
Sun Sep 15 20:08:19 2019 kern.info kernel: [ 1639.023357] br-guest: port 2(wlan0-1) entered disabled state
Sun Sep 15 20:08:19 2019 daemon.notice hostapd: nl80211: Failed to remove interface wlan0-1 from bridge br-guest: No such device
Sun Sep 15 20:08:19 2019 daemon.notice hostapd: wlan0: AP-DISABLED
Sun Sep 15 20:08:19 2019 daemon.notice hostapd: wlan0: CTRL-EVENT-TERMINATING
Sun Sep 15 20:08:19 2019 daemon.notice hostapd: nl80211: deinit ifname=wlan0 disabled_11b_rates=0
Sun Sep 15 20:08:19 2019 daemon.notice hostapd: nl80211: Failed to remove interface wlan0 from bridge br-lan: Invalid argument
Sun Sep 15 20:08:19 2019 user.notice mac80211: Failed command: iw phy phy0 set antenna 0xffffffff 0xffffffff
Sun Sep 15 20:08:19 2019 daemon.notice netifd: radio0 (1867): command failed: Not supported (-122)
Sun Sep 15 20:08:19 2019 user.notice mac80211: Failed command: iw phy phy0 set distance 0
Sun Sep 15 20:08:19 2019 daemon.err hostapd: Configuration file: /var/run/hostapd-phy0.conf
Sun Sep 15 20:08:21 2019 kern.info kernel: [ 1639.912716] ieee80211 phy0: rt2800_rf_self_txdc_cal: Info - RF Tx self calibration start
Sun Sep 15 20:08:21 2019 kern.info kernel: [ 1639.913245] ieee80211 phy0: rt2800_rf_self_txdc_cal: Info - RF Tx self calibration end
Sun Sep 15 20:08:22 2019 kern.info kernel: [ 1641.824164] ieee80211 phy0: rt2800_loft_iq_calibration: Info - LOFT Calibration Done!
Sun Sep 15 20:08:22 2019 kern.info kernel: [ 1641.828164] ieee80211 phy0: rt2800_iq_search: Info - IQCalibration Start!
Sun Sep 15 20:08:22 2019 kern.info kernel: [ 1641.842569] ieee80211 phy0: rt2800_iq_search: Info - IQCalibration Done! CH = 0, (gain= 0, phase=3f)
Sun Sep 15 20:08:22 2019 kern.info kernel: [ 1641.843488] ieee80211 phy0: rt2800_iq_search: Info - IQCalibration Start!
Sun Sep 15 20:08:22 2019 kern.info kernel: [ 1641.857895] ieee80211 phy0: rt2800_iq_search: Info - IQCalibration Done! CH = 1, (gain= 0, phase= 2)
Sun Sep 15 20:08:22 2019 kern.info kernel: [ 1641.857931] ieee80211 phy0: rt2800_loft_iq_calibration: Info - TX IQ Calibration Done!
Sun Sep 15 20:08:22 2019 kern.info kernel: [ 1641.871433] ieee80211 phy0: rt2800_rxiq_calibration: Info - RXIQ G_imb=1, Ph_rx=-6
Sun Sep 15 20:08:22 2019 kern.info kernel: [ 1641.881694] ieee80211 phy0: rt2800_rxiq_calibration: Info - RXIQ G_imb=0, Ph_rx=2
Sun Sep 15 20:08:22 2019 kern.info kernel: [ 1641.888849] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
Sun Sep 15 20:08:22 2019 kern.info kernel: [ 1641.894441] br-lan: port 2(wlan0) entered blocking state
Sun Sep 15 20:08:22 2019 kern.info kernel: [ 1641.894456] br-lan: port 2(wlan0) entered disabled state
Sun Sep 15 20:08:22 2019 kern.info kernel: [ 1641.894799] device wlan0 entered promiscuous mode
Sun Sep 15 20:08:22 2019 daemon.notice hostapd: wlan0: interface state UNINITIALIZED->COUNTRY_UPDATE
Sun Sep 15 20:08:22 2019 daemon.err hostapd: Using interface wlan0 with hwaddr XX:XX:XX:XX:XX:XX and ssid "HOME"
Sun Sep 15 20:08:22 2019 daemon.err hostapd: Interface initialization failed
Sun Sep 15 20:08:22 2019 daemon.notice hostapd: wlan0: interface state COUNTRY_UPDATE->DISABLED
Sun Sep 15 20:08:22 2019 kern.info kernel: [ 1641.994731] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
Sun Sep 15 20:08:22 2019 kern.info kernel: [ 1641.994904] br-lan: port 2(wlan0) entered blocking state
Sun Sep 15 20:08:22 2019 kern.info kernel: [ 1641.994914] br-lan: port 2(wlan0) entered forwarding state
Sun Sep 15 20:08:22 2019 daemon.notice hostapd: wlan0: AP-DISABLED
Sun Sep 15 20:08:22 2019 daemon.err hostapd: wlan0: Unable to setup interface.
Sun Sep 15 20:08:22 2019 daemon.notice hostapd: wlan0: interface state DISABLED->DISABLED
Sun Sep 15 20:08:22 2019 daemon.notice hostapd: wlan0-1: AP-DISABLED
Sun Sep 15 20:08:22 2019 daemon.notice hostapd: wlan0-1: CTRL-EVENT-TERMINATING
Sun Sep 15 20:08:22 2019 daemon.err hostapd: hostapd_free_hapd_data: Interface wlan0-1 wasn't started
Sun Sep 15 20:08:22 2019 daemon.notice hostapd: wlan0: AP-DISABLED
Sun Sep 15 20:08:22 2019 daemon.notice hostapd: wlan0: CTRL-EVENT-TERMINATING
Sun Sep 15 20:08:22 2019 daemon.err hostapd: hostapd_free_hapd_data: Interface wlan0 wasn't started
Sun Sep 15 20:08:22 2019 daemon.notice hostapd: nl80211: deinit ifname=wlan0 disabled_11b_rates=0
Sun Sep 15 20:08:22 2019 kern.info kernel: [ 1642.002616] device wlan0 left promiscuous mode
Sun Sep 15 20:08:22 2019 kern.info kernel: [ 1642.002723] br-lan: port 2(wlan0) entered disabled state
Sun Sep 15 20:08:22 2019 daemon.notice hostapd: ELOOP: remaining socket: sock=22 eloop_data=0x77d76c60 user_data=0 handler=0x46a4f5
Sun Sep 15 20:08:22 2019 daemon.notice netifd: radio0 (1867): WARNING (wireless_add_process): executable path /usr/sbin/wpad does not match process 1120 path ()
Sun Sep 15 20:08:22 2019 daemon.notice netifd: radio0 (1867): Device setup failed: HOSTAPD_START_FAILED
The text was updated successfully, but these errors were encountered: