You signed in with another tab or window. Reload to refresh your session.You signed out in another tab or window. Reload to refresh your session.You switched accounts on another tab or window. Reload to refresh your session.Dismiss alert
Trying to update to the latest version (openwrt-18.06.4-ar71xx-generic-cpe210-220-v1-squashfs-sysupgrade.bin) has failed and has entered into safeloader. I put it to your knowledge in case there is a fault in the firmware.
CPE210 V1.1 with openwrt-18.06.2-ar71xx-generic-cpe210-220-v1-squashfs-sysupgrade.bin
With a USB serial cable:
"TP-LINK SafeLoader (Build time: Jun 12 2015 - 09:49:53)
CPU: 560MHz AHB: 225MHz DDR: 64MB
Performing LED check.. PASS
Press CTRL+B to enter SafeLoader: 1
Flash Manufacturer: Unknown(0xc8)
Flash Device ID: Unknown(0x4017)
Data flash init failed.
open user-config failed.
open user-config failed.
enet0 port4 up
TFTP server address is 192.168.0.100; our address is 192.168.0.254
Get filename 'recovery.bin'.
TFTP error: Starting again.
faddr is 0x0, fsize is 0x0
reserved is 0x83832c86, load_reserved_size is 0x0
WARNING: Data loaded outside of the reserved load area, memory corruption may occur.
##Warning: File is unidentiable. Try downloading
TFTP server address is 192.168.0.100; our address is 192.168.0.254
Get filename 'vmlinuz'.
TFTP error: Starting again.
faddr is 0x0, fsize is 0x0
reserved is 0x83832206, load_reserved_size is 0x0
WARNING: Data loaded outside of the reserved load area, memory corruption may occur.
##ERROR: Can't download image.
Password"
The text was updated successfully, but these errors were encountered:
So is this regression? I mean, it was working fine with 18.06.2 and it's broken in 18.06.4? Can you please try to reproduce it with the latest snapshot image?
CPE210 v1 seems to have different bootloaders without any means for external distinction. I've recently encountered a device with broken uboot that wouldn't accept any firmware (even from vendor).
jatitonejro:
Trying to update to the latest version (openwrt-18.06.4-ar71xx-generic-cpe210-220-v1-squashfs-sysupgrade.bin) has failed and has entered into safeloader. I put it to your knowledge in case there is a fault in the firmware.
CPE210 V1.1 with openwrt-18.06.2-ar71xx-generic-cpe210-220-v1-squashfs-sysupgrade.bin
With a USB serial cable:
"TP-LINK SafeLoader (Build time: Jun 12 2015 - 09:49:53)
CPU: 560MHz AHB: 225MHz DDR: 64MB
Performing LED check.. PASS
Press CTRL+B to enter SafeLoader: 1
Flash Manufacturer: Unknown(0xc8)
Flash Device ID: Unknown(0x4017)
Data flash init failed.
open user-config failed.
open user-config failed.
enet0 port4 up
TFTP server address is 192.168.0.100; our address is 192.168.0.254
Get filename 'recovery.bin'.
TFTP error: Starting again.
faddr is 0x0, fsize is 0x0
reserved is 0x83832c86, load_reserved_size is 0x0
WARNING: Data loaded outside of the reserved load area, memory corruption may occur.
##Warning: File is unidentiable. Try downloading
TFTP server address is 192.168.0.100; our address is 192.168.0.254
Get filename 'vmlinuz'.
TFTP error: Starting again.
faddr is 0x0, fsize is 0x0
reserved is 0x83832206, load_reserved_size is 0x0
WARNING: Data loaded outside of the reserved load area, memory corruption may occur.
##ERROR: Can't download image.
Password"
The text was updated successfully, but these errors were encountered: