OpenWrt/LEDE Project

  • Status Unconfirmed
  • Percent Complete
    0%
  • Task Type Bug Report
  • Category Base system
  • Assigned To No-one
  • Operating System All
  • Severity Critical
  • Priority Very Low
  • Reported Version openwrt-18.06
  • Due in Version Undecided
  • Due Date Undecided
  • Private
Attached to Project: OpenWrt/LEDE Project
Opened by Jatito - 09.07.2019

FS#2370 - CPE210 V1.1 Brick after update 18.06.04

Trying to update to the latest version (openwrt-18.06.4-ar71xx-generic-cpe210-220-v1-squashfs-sysupgrade.bin) has failed and has entered into safeloader. I put it to your knowledge in case there is a fault in the firmware.

CPE210 V1.1 with openwrt-18.06.2-ar71xx-generic-cpe210-220-v1-squashfs-sysupgrade.bin

With a USB serial cable:

“TP-LINK SafeLoader (Build time: Jun 12 2015 - 09:49:53)
CPU: 560MHz AHB: 225MHz DDR: 64MB
Performing LED check.. PASS
Press CTRL+B to enter SafeLoader: 1
Flash Manufacturer: Unknown(0xc8)
Flash Device ID: Unknown(0×4017)
Data flash init failed.
open user-config failed.
open user-config failed.

enet0 port4 up

TFTP server address is 192.168.0.100; our address is 192.168.0.254
Get filename ‘recovery.bin’.

TFTP error: Starting again.
faddr is 0×0, fsize is 0×0 reserved is 0x83832c86, load_reserved_size is 0×0 WARNING: Data loaded outside of the reserved load area, memory corruption may occur.
##Warning: File is unidentiable. Try downloading

TFTP server address is 192.168.0.100; our address is 192.168.0.254
Get filename ‘vmlinuz’.

TFTP error: Starting again.
faddr is 0×0, fsize is 0×0 reserved is 0×83832206, load_reserved_size is 0×0 WARNING: Data loaded outside of the reserved load area, memory corruption may occur.
##ERROR: Can’t download image.

Password”

Admin
Petr Štetiar commented on 14.07.2019 20:00

So is this regression? I mean, it was working fine with 18.06.2 and it's broken in 18.06.4? Can you please try to reproduce it with the latest snapshot image?

Project Manager
Adrian Schmutzler commented on 06.11.2019 18:01

CPE210 v1 seems to have different bootloaders without any means for external distinction. I've recently encountered a device with broken uboot that wouldn't accept any firmware (even from vendor).

Loading...

Available keyboard shortcuts

Tasklist

Task Details

Task Editing