OpenWrt/LEDE Project

  • Status Unconfirmed
  • Percent Complete
    0%
  • Task Type Bug Report
  • Category Base system
  • Assigned To No-one
  • Operating System All
  • Severity Critical
  • Priority Very Low
  • Reported Version openwrt-18.06
  • Due in Version Undecided
  • Due Date Undecided
  • Private
Attached to Project: OpenWrt/LEDE Project
Opened by Jatito - 09.07.2019

FS#2370 - CPE210 V1.1 Brick after update 18.06.04

Trying to update to the latest version (openwrt-18.06.4-ar71xx-generic-cpe210-220-v1-squashfs-sysupgrade.bin) has failed and has entered into safeloader. I put it to your knowledge in case there is a fault in the firmware.

CPE210 V1.1 with openwrt-18.06.2-ar71xx-generic-cpe210-220-v1-squashfs-sysupgrade.bin

With a USB serial cable:

“TP-LINK SafeLoader (Build time: Jun 12 2015 - 09:49:53)
CPU: 560MHz AHB: 225MHz DDR: 64MB
Performing LED check.. PASS
Press CTRL+B to enter SafeLoader: 1
Flash Manufacturer: Unknown(0xc8)
Flash Device ID: Unknown(0×4017)
Data flash init failed.
open user-config failed.
open user-config failed.

enet0 port4 up

TFTP server address is 192.168.0.100; our address is 192.168.0.254
Get filename ‘recovery.bin’.

TFTP error: Starting again.
faddr is 0×0, fsize is 0×0 reserved is 0x83832c86, load_reserved_size is 0×0 WARNING: Data loaded outside of the reserved load area, memory corruption may occur.
##Warning: File is unidentiable. Try downloading

TFTP server address is 192.168.0.100; our address is 192.168.0.254
Get filename ‘vmlinuz’.

TFTP error: Starting again.
faddr is 0×0, fsize is 0×0 reserved is 0×83832206, load_reserved_size is 0×0 WARNING: Data loaded outside of the reserved load area, memory corruption may occur.
##ERROR: Can’t download image.

Password”

Admin
Petr Štetiar commented on 14.07.2019 20:00

So is this regression? I mean, it was working fine with 18.06.2 and it's broken in 18.06.4? Can you please try to reproduce it with the latest snapshot image?

Loading...

Available keyboard shortcuts

Tasklist

Task Details

Task Editing