Skip to content
New issue

Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.

By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.

Already on GitHub? Sign in to your account

FS#2370 - CPE210 V1.1 Brick after update 18.06.04 #8385

Closed
openwrt-bot opened this issue Jul 9, 2019 · 2 comments
Closed

FS#2370 - CPE210 V1.1 Brick after update 18.06.04 #8385

openwrt-bot opened this issue Jul 9, 2019 · 2 comments
Labels

Comments

@openwrt-bot
Copy link

jatitonejro:

Trying to update to the latest version (openwrt-18.06.4-ar71xx-generic-cpe210-220-v1-squashfs-sysupgrade.bin) has failed and has entered into safeloader. I put it to your knowledge in case there is a fault in the firmware.

CPE210 V1.1 with openwrt-18.06.2-ar71xx-generic-cpe210-220-v1-squashfs-sysupgrade.bin

With a USB serial cable:

"TP-LINK SafeLoader (Build time: Jun 12 2015 - 09:49:53)
CPU: 560MHz AHB: 225MHz DDR: 64MB
Performing LED check.. PASS
Press CTRL+B to enter SafeLoader: 1
Flash Manufacturer: Unknown(0xc8)
Flash Device ID: Unknown(0x4017)
Data flash init failed.
open user-config failed.
open user-config failed.

enet0 port4 up

TFTP server address is 192.168.0.100; our address is 192.168.0.254
Get filename 'recovery.bin'.

TFTP error: Starting again.
faddr is 0x0, fsize is 0x0
reserved is 0x83832c86, load_reserved_size is 0x0
WARNING: Data loaded outside of the reserved load area, memory corruption may occur.
##Warning: File is unidentiable. Try downloading

TFTP server address is 192.168.0.100; our address is 192.168.0.254
Get filename 'vmlinuz'.

TFTP error: Starting again.
faddr is 0x0, fsize is 0x0
reserved is 0x83832206, load_reserved_size is 0x0
WARNING: Data loaded outside of the reserved load area, memory corruption may occur.
##ERROR: Can't download image.

Password"

@openwrt-bot
Copy link
Author

ynezz:

So is this regression? I mean, it was working fine with 18.06.2 and it's broken in 18.06.4? Can you please try to reproduce it with the latest snapshot image?

@openwrt-bot
Copy link
Author

adrianschmutzler:

CPE210 v1 seems to have different bootloaders without any means for external distinction. I've recently encountered a device with broken uboot that wouldn't accept any firmware (even from vendor).

Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment
Labels
Projects
None yet
Development

No branches or pull requests

1 participant