Skip to content
New issue

Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.

By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.

Already on GitHub? Sign in to your account

FS#2342 - mt7621 "PCIE2 no card" error at cold boot #7198

Open
openwrt-bot opened this issue Jun 27, 2019 · 3 comments
Open

FS#2342 - mt7621 "PCIE2 no card" error at cold boot #7198

openwrt-bot opened this issue Jun 27, 2019 · 3 comments
Labels

Comments

@openwrt-bot
Copy link

sinancetinkaya:

Supply the following if possible:

  • Device problem occurs on

root@OpenWrt:~# cat /etc/*-release
NAME="OpenWrt"
VERSION="SNAPSHOT"
ID="openwrt"
ID_LIKE="lede openwrt"
PRETTY_NAME="OpenWrt SNAPSHOT"
VERSION_ID="snapshot"
HOME_URL="https://openwrt.org/"
BUG_URL="https://bugs.openwrt.org/"
SUPPORT_URL="https://forum.openwrt.org/"
BUILD_ID="r10327-a0e5ca4f35"
LEDE_BOARD="ramips/mt7621"
LEDE_ARCH="mipsel_24kc"
LEDE_TAINTS=""
LEDE_DEVICE_MANUFACTURER="OpenWrt"
LEDE_DEVICE_MANUFACTURER_URL="https://openwrt.org/"
LEDE_DEVICE_PRODUCT="Generic"
LEDE_DEVICE_REVISION="v0"
LEDE_RELEASE="OpenWrt SNAPSHOT r10327-a0e5ca4f35"

  • Software versions of OpenWrt/LEDE release, packages, etc.
root@OpenWrt:~# opkg list-installed base-files - 200-r10327-a0e5ca4f35 block-mount - 2019-03-28-ff1ded63-5 busybox - 1.31.0-1 dnsmasq - 2.80-13 dropbear - 2019.78-2 firewall - 2019-01-02-70f8785b-2 fstools - 2019-03-28-ff1ded63-5 fwtool - 1 getrandom - 2019-06-16-4df34a4d-2 hostapd-common - 2018-12-02-c2c6c01b-6 htop - 2.2.0-2 ip6tables - 1.8.2-3 iperf3 - 3.6-1 iptables - 1.8.2-3 iptables-mod-conntrack-extra - 1.8.2-3 iptables-mod-ipopt - 1.8.2-3 iw-full - 5.0.1-1 jshn - 2019-06-16-ecf56174-1 jsonfilter - 2018-02-04-c7e938d6-1 kernel - 4.14.129-1-2c88b7be5bf978d41a9f6038dabdd3b4 kmod-ata-ahci - 4.14.129-1 kmod-ata-core - 4.14.129-1 kmod-cfg80211 - 4.14.129+4.19.32-1-2 kmod-crypto-crc32c - 4.14.129-1 kmod-crypto-hash - 4.14.129-1 kmod-fs-ext4 - 4.14.129-1 kmod-gpio-button-hotplug - 4.14.129-2 kmod-ifb - 4.14.129-1 kmod-ip6tables - 4.14.129-1 kmod-ipt-conntrack - 4.14.129-1 kmod-ipt-conntrack-extra - 4.14.129-1 kmod-ipt-core - 4.14.129-1 kmod-ipt-ipopt - 4.14.129-1 kmod-ipt-nat - 4.14.129-1 kmod-ipt-offload - 4.14.129-1 kmod-ipt-raw - 4.14.129-1 kmod-leds-gpio - 4.14.129-1 kmod-lib-crc-ccitt - 4.14.129-1 kmod-lib-crc16 - 4.14.129-1 kmod-mac80211 - 4.14.129+4.19.32-1-2 kmod-mmc - 4.14.129-1 kmod-mt76 - 4.14.129+2019-06-25-d680ab01-1 kmod-mt76-core - 4.14.129+2019-06-25-d680ab01-1 kmod-mt7603 - 4.14.129+2019-06-25-d680ab01-1 kmod-mt76x02-common - 4.14.129+2019-06-25-d680ab01-1 kmod-mt76x2 - 4.14.129+2019-06-25-d680ab01-1 kmod-mt76x2-common - 4.14.129+2019-06-25-d680ab01-1 kmod-nf-conntrack - 4.14.129-1 kmod-nf-conntrack6 - 4.14.129-1 kmod-nf-flow - 4.14.129-1 kmod-nf-ipt - 4.14.129-1 kmod-nf-ipt6 - 4.14.129-1 kmod-nf-nat - 4.14.129-1 kmod-nf-reject - 4.14.129-1 kmod-nf-reject6 - 4.14.129-1 kmod-nls-base - 4.14.129-1 kmod-ppp - 4.14.129-1 kmod-pppoe - 4.14.129-1 kmod-pppox - 4.14.129-1 kmod-sched-cake - 4.14.129+2019-03-12-057c7388-1 kmod-sched-core - 4.14.129-1 kmod-scsi-core - 4.14.129-1 kmod-sdhci-mt7620 - 4.14.129-1 kmod-slhc - 4.14.129-1 kmod-usb-core - 4.14.129-1 kmod-usb-storage - 4.14.129-1 kmod-usb-storage-uas - 4.14.129-1 kmod-usb3 - 4.14.129-1 libblobmsg-json - 2019-06-16-ecf56174-1 libc - 1.1.22-1 libelf1 - 0.176-2 libgcc1 - 7.4.0-1 libip4tc0 - 1.8.2-3 libip6tc0 - 1.8.2-3 libiwinfo-lua - 2019-06-12-1372f47e-1 libiwinfo20181126 - 2019-06-12-1372f47e-1 libjson-c4 - 0.13.1-1 libjson-script - 2019-06-16-ecf56174-1 libkmod - 20-1 liblua5.1.5 - 5.1.5-3 liblucihttp-lua - 2019-06-05-91c01c3c-1 liblucihttp0 - 2019-06-05-91c01c3c-1 libmnl0 - 1.0.4-2 libncurses6 - 6.1-4 libnl-tiny - 0.1-5 libpci - 3.6.2-3 libpthread - 1.1.22-1 librt - 1.1.22-1 libubox20170601 - 2019-06-16-ecf56174-1 libubus-lua - 2018-10-06-221ce7e7-1 libubus20170705 - 2018-10-06-221ce7e7-1 libuci20130104 - 2019-05-17-f199b961-3 libuclient20160123 - 2019-05-30-3b3e368d-1 libusb-1.0-0 - 1.0.22-2 libxtables12 - 1.8.2-3 logd - 2019-06-16-4df34a4d-2 lua - 5.1.5-3 luci - git-19.175.17568-86fd703-1 luci-app-firewall - git-19.175.17568-86fd703-1 luci-app-opkg - git-19.175.17568-86fd703-1 luci-app-samba - git-19.175.17568-86fd703-1 luci-app-sqm - 1.3.0-1 luci-base - f138fc93-1 luci-lib-ip - git-19.175.17568-86fd703-1 luci-lib-jsonc - git-19.175.17568-86fd703-1 luci-lib-nixio - git-19.175.17568-86fd703-1 luci-mod-admin-full - git-19.175.17568-86fd703-1 luci-mod-network - git-19.175.17568-86fd703-1 luci-mod-status - git-19.175.17568-86fd703-1 luci-mod-system - git-19.175.17568-86fd703-1 luci-proto-ipv6 - git-19.175.17568-86fd703-1 luci-proto-ppp - git-19.175.17568-86fd703-1 luci-theme-bootstrap - git-19.175.17568-86fd703-1 luci-wrtbwmon - v0.8.3 mtd - 24 nano - 4.3-1 netifd - 2019-06-15-9932ed02-1 odhcp6c - 2019-01-11-d2e247d8-16 odhcpd-ipv6only - 2019-05-17-41a74cba-3 openwrt-keyring - 2018-05-18-103a32e9-1 opkg - 2019-06-14-dcbc142e-1 pciutils - 3.6.2-3 ppp - 2.4.7.git-2019-05-25-2 ppp-mod-pppoe - 2.4.7.git-2019-05-25-2 procd - 2019-05-30-ade00ca5-1 rpcd - 2019-06-05-89bfaa42-2 rpcd-mod-rrdns - 20170710 samba36-server - 3.6.25-14 sqm-scripts - 1.3.0-1 swconfig - 12 tc - 5.0.0-2 terminfo - 6.1-4 ubi-utils - 2.0.2-1 ubox - 2019-06-16-4df34a4d-2 ubus - 2018-10-06-221ce7e7-1 ubusd - 2018-10-06-221ce7e7-1 uci - 2019-05-17-f199b961-3 uclient-fetch - 2019-05-30-3b3e368d-1 uhttpd - 2019-06-16-91fcac34-3 urandom-seed - 1.0-1 urngd - 2019-06-17-c057e177-1 usbutils - 007-10 usign - 2015-07-04-ef641914-1 wireless-regdb - 2017-10-20-4343d359 wpad-mini - 2018-12-02-c2c6c01b-6 wrtbwmon - 0.36 zlib - 1.2.11-3
  • Steps to reproduce

I have UniElec U7621-06 router with 3 miniPCIe slots. PCIE2 slot gets not detected when the device boots from cold boot.
When I reboot the device from LuCi (warm boot) it works fine.

root@OpenWrt:~# lspci
00:00.0 PCI bridge: Device 0e8d:0801 (rev 01)
00:01.0 PCI bridge: Device 0e8d:0801 (rev 01)
00:02.0 PCI bridge: Device 0e8d:0801 (rev 01)
01:00.0 SATA controller: ASMedia Technology Inc. ASM1062 Serial ATA Controller (rev 01)
02:00.0 Network controller: MEDIATEK Corp. Device 7612
03:00.0 Network controller: MEDIATEK Corp. Device 7602

@openwrt-bot
Copy link
Author

sinancetinkaya:

dmesg

[ 0.000000] Linux version 4.14.129 (buildbot@602ce18687ab) (gcc version 7.4.0 (OpenWrt GCC 7.4.0 r10327-a0e5ca4f35)) #0 SMP Tue Jun 25 11:24:49 2019
[ 0.000000] SoC Type: MediaTek MT7621 ver:1 eco:3
[ 0.000000] bootconsole [early0] enabled
[ 0.000000] CPU0 revision is: 0001992f (MIPS 1004Kc)
[ 0.000000] MIPS: machine is UniElec U7621-06 (256M RAM/16M flash)
[ 0.000000] Determined physical RAM map:
[ 0.000000] memory: 10000000 @ 00000000 (usable)
[ 0.000000] Initrd not found or empty - disabling initrd
[ 0.000000] VPE topology {2,2} total 4
[ 0.000000] Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes.
[ 0.000000] Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes
[ 0.000000] MIPS secondary cache 256kB, 8-way, linesize 32 bytes.
[ 0.000000] Zone ranges:
[ 0.000000] Normal [mem 0x0000000000000000-0x000000000fffffff]
[ 0.000000] HighMem empty
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000000000-0x000000000fffffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x000000000fffffff]
[ 0.000000] On node 0 totalpages: 65536
[ 0.000000] free_area_init_node: node 0, pgdat 80634860, node_mem_map 81003000
[ 0.000000] Normal zone: 576 pages used for memmap
[ 0.000000] Normal zone: 0 pages reserved
[ 0.000000] Normal zone: 65536 pages, LIFO batch:15
[ 0.000000] random: get_random_bytes called from start_kernel+0x9c/0x4e0 with crng_init=0
[ 0.000000] percpu: Embedded 14 pages/cpu s26128 r8192 d23024 u57344
[ 0.000000] pcpu-alloc: s26128 r8192 d23024 u57344 alloc=144096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 64960
[ 0.000000] Kernel command line: console=ttyS0,115200 rootfstype=squashfs,jffs2
[ 0.000000] PID hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
[ 0.000000] Writing ErrCtl register=00051c0f
[ 0.000000] Readback ErrCtl register=00051c0f
[ 0.000000] Memory: 252456K/262144K available (5018K kernel code, 261K rwdata, 1076K rodata, 224K init, 260K bss, 9688K reserved, 0K cma-reserved, 0K highmem)
[ 0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] NR_IRQS: 256
[ 0.000000] CPU Clock: 880MHz
[ 0.000000] clocksource: GIC: mask: 0xffffffffffffffff max_cycles: 0xcaf478abb4, max_idle_ns: 440795247997 ns
[ 0.000000] clocksource: MIPS: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 4343773742 ns
[ 0.000010] sched_clock: 32 bits at 440MHz, resolution 2ns, wraps every 4880645118ns
[ 0.007838] Calibrating delay loop... 586.13 BogoMIPS (lpj=2930688)
[ 0.073997] pid_max: default: 32768 minimum: 301
[ 0.078840] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.085351] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.094785] Hierarchical SRCU implementation.
[ 0.100086] smp: Bringing up secondary CPUs ...
[ 0.041035] Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes.
[ 0.041044] Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes
[ 0.041057] MIPS secondary cache 256kB, 8-way, linesize 32 bytes.
[ 0.041213] CPU1 revision is: 0001992f (MIPS 1004Kc)
[ 0.164894] Synchronize counters for CPU 1: done.
[ 8.236089] Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes.
[ 8.236098] Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes
[ 8.236106] MIPS secondary cache 256kB, 8-way, linesize 32 bytes.
[ 8.236188] CPU2 revision is: 0001992f (MIPS 1004Kc)
[ 0.256364] Synchronize counters for CPU 2: done.
[ 2.674101] Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes.
[ 2.674111] Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes
[ 2.674120] MIPS secondary cache 256kB, 8-way, linesize 32 bytes.
[ 2.674210] CPU3 revision is: 0001992f (MIPS 1004Kc)
[ 0.341550] Synchronize counters for CPU 3: done.
[ 0.371421] smp: Brought up 1 node, 4 CPUs
[ 0.379810] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[ 0.389591] futex hash table entries: 1024 (order: 3, 32768 bytes)
[ 0.396043] pinctrl core: initialized pinctrl subsystem
[ 0.402986] NET: Registered protocol family 16
[ 0.418679] FPU Affinity set after 11720 emulations
[ 0.419710] pull PCIe RST: RALINK_RSTCTRL = 4000000
[ 0.725007] release PCIe RST: RALINK_RSTCTRL = 7000000
[ 0.730055] ***** Xtal 40MHz *****
[ 0.733414] release PCIe RST: RALINK_RSTCTRL = 7000000
[ 0.738506] Port 0 N_FTS = 1b102800
[ 0.741978] Port 1 N_FTS = 1b102800
[ 0.745418] Port 2 N_FTS = 1b102800
[ 1.900907] PCIE2 no card, disable it(RST&CLK)
[ 1.905274] -> 21007f2
[ 1.907668] PCIE0 enabled
[ 1.910259] PCIE1 enabled
[ 1.912868] PCI host bridge /pcie@1e140000 ranges:
[ 1.917641] MEM 0x0000000060000000..0x000000006fffffff
[ 1.922800] IO 0x000000001e160000..0x000000001e16ffff
[ 1.928003] PCI coherence region base: 0xbfbf8000, mask/settings: 0x60000000
[ 1.945908] mt7621_gpio 1e000600.gpio: registering 32 gpios
[ 1.951712] mt7621_gpio 1e000600.gpio: registering 32 gpios
[ 1.957553] mt7621_gpio 1e000600.gpio: registering 32 gpios
[ 1.964780] PCI host bridge to bus 0000:00
[ 1.968864] pci_bus 0000:00: root bus resource [mem 0x60000000-0x6fffffff]
[ 1.975630] pci_bus 0000:00: root bus resource [io 0xffffffff]
[ 1.981522] pci_bus 0000:00: root bus resource [??? 0x00000000 flags 0x0]
[ 1.988248] pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff]
[ 1.996181] pci 0000:00:00.0: [0e8d:0801] type 01 class 0x060400
[ 1.996224] pci 0000:00:00.0: reg 0x10: [mem 0x00000000-0x7fffffff]
[ 1.996236] pci 0000:00:00.0: reg 0x14: [mem 0x00000000-0x0000ffff]
[ 1.996305] pci 0000:00:00.0: supports D1
[ 1.996314] pci 0000:00:00.0: PME# supported from D0 D1 D3hot
[ 1.996567] pci 0000:00:01.0: [0e8d:0801] type 01 class 0x060400
[ 1.996596] pci 0000:00:01.0: reg 0x10: [mem 0x00000000-0x7fffffff]
[ 1.996609] pci 0000:00:01.0: reg 0x14: [mem 0x00000000-0x0000ffff]
[ 1.996668] pci 0000:00:01.0: supports D1
[ 1.996677] pci 0000:00:01.0: PME# supported from D0 D1 D3hot
[ 1.996921] pci 0000:00:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring
[ 2.004825] pci 0000:00:01.0: bridge configuration invalid ([bus 00-00]), reconfiguring
[ 2.012984] pci 0000:01:00.0: [1b21:0612] type 00 class 0x010601
[ 2.013035] pci 0000:01:00.0: reg 0x10: [io 0x0000-0x0007]
[ 2.013051] pci 0000:01:00.0: reg 0x14: [io 0x0000-0x0003]
[ 2.013068] pci 0000:01:00.0: reg 0x18: [io 0x0000-0x0007]
[ 2.013085] pci 0000:01:00.0: reg 0x1c: [io 0x0000-0x0003]
[ 2.013102] pci 0000:01:00.0: reg 0x20: [io 0x0000-0x001f]
[ 2.013119] pci 0000:01:00.0: reg 0x24: [mem 0x00000000-0x000001ff]
[ 2.013136] pci 0000:01:00.0: reg 0x30: [mem 0x00000000-0x0000ffff pref]
[ 2.013403] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01
[ 2.013598] pci 0000:02:00.0: [14c3:7612] type 00 class 0x028000
[ 2.013657] pci 0000:02:00.0: reg 0x10: [mem 0x00000000-0x000fffff 64bit]
[ 2.013704] pci 0000:02:00.0: reg 0x30: [mem 0x00000000-0x0000ffff pref]
[ 2.013800] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
[ 2.013985] pci_bus 0000:02: busn_res: [bus 02-ff] end is updated to 02
[ 2.014005] pci_bus 0000:00: busn_res: [bus 00-ff] end is updated to 02
[ 2.014078] pci 0000:00:00.0: BAR 0: no space for [mem size 0x80000000]
[ 2.020594] pci 0000:00:00.0: BAR 0: failed to assign [mem size 0x80000000]
[ 2.027527] pci 0000:00:01.0: BAR 0: no space for [mem size 0x80000000]
[ 2.034071] pci 0000:00:01.0: BAR 0: failed to assign [mem size 0x80000000]
[ 2.040999] pci 0000:00:00.0: BAR 8: assigned [mem 0x60000000-0x600fffff]
[ 2.047719] pci 0000:00:00.0: BAR 9: assigned [mem 0x60100000-0x601fffff pref]
[ 2.054912] pci 0000:00:01.0: BAR 8: assigned [mem 0x60200000-0x602fffff]
[ 2.061635] pci 0000:00:01.0: BAR 9: assigned [mem 0x60300000-0x603fffff pref]
[ 2.068822] pci 0000:00:00.0: BAR 1: assigned [mem 0x60400000-0x6040ffff]
[ 2.075552] pci 0000:00:01.0: BAR 1: assigned [mem 0x60410000-0x6041ffff]
[ 2.082300] pci 0000:00:00.0: BAR 7: no space for [io size 0x1000]
[ 2.088497] pci 0000:00:00.0: BAR 7: failed to assign [io size 0x1000]
[ 2.095098] pci 0000:01:00.0: BAR 6: assigned [mem 0x60100000-0x6010ffff pref]
[ 2.102243] pci 0000:01:00.0: BAR 5: assigned [mem 0x60000000-0x600001ff]
[ 2.108997] pci 0000:01:00.0: BAR 4: no space for [io size 0x0020]
[ 2.115200] pci 0000:01:00.0: BAR 4: failed to assign [io size 0x0020]
[ 2.121779] pci 0000:01:00.0: BAR 0: no space for [io size 0x0008]
[ 2.127982] pci 0000:01:00.0: BAR 0: failed to assign [io size 0x0008]
[ 2.134569] pci 0000:01:00.0: BAR 2: no space for [io size 0x0008]
[ 2.140769] pci 0000:01:00.0: BAR 2: failed to assign [io size 0x0008]
[ 2.147357] pci 0000:01:00.0: BAR 1: no space for [io size 0x0004]
[ 2.153562] pci 0000:01:00.0: BAR 1: failed to assign [io size 0x0004]
[ 2.160143] pci 0000:01:00.0: BAR 3: no space for [io size 0x0004]
[ 2.166347] pci 0000:01:00.0: BAR 3: failed to assign [io size 0x0004]
[ 2.172933] pci 0000:00:00.0: PCI bridge to [bus 01]
[ 2.177840] pci 0000:00:00.0: bridge window [mem 0x60000000-0x600fffff]
[ 2.184592] pci 0000:00:00.0: bridge window [mem 0x60100000-0x601fffff pref]
[ 2.191765] pci 0000:02:00.0: BAR 0: assigned [mem 0x60200000-0x602fffff 64bit]
[ 2.199038] pci 0000:02:00.0: BAR 6: assigned [mem 0x60300000-0x6030ffff pref]
[ 2.206179] pci 0000:00:01.0: PCI bridge to [bus 02]
[ 2.211117] pci 0000:00:01.0: bridge window [mem 0x60200000-0x602fffff]
[ 2.217845] pci 0000:00:01.0: bridge window [mem 0x60300000-0x603fffff pref]
[ 2.226485] clocksource: Switched to clocksource GIC
[ 2.233369] NET: Registered protocol family 2
[ 2.238493] TCP established hash table entries: 2048 (order: 1, 8192 bytes)
[ 2.245380] TCP bind hash table entries: 2048 (order: 2, 16384 bytes)
[ 2.251830] TCP: Hash tables configured (established 2048 bind 2048)
[ 2.258311] UDP hash table entries: 256 (order: 1, 8192 bytes)
[ 2.264080] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
[ 2.270574] NET: Registered protocol family 1
[ 2.274901] PCI: CLS 0 bytes, default 32
[ 2.506432] 4 CPUs re-calibrate udelay(lpj = 2924544)
[ 2.513141] Crashlog allocated RAM at address 0x3f00000
[ 2.518607] workingset: timestamp_bits=14 max_order=16 bucket_order=2
[ 2.528188] random: fast init done
[ 2.537983] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 2.543734] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
[ 2.558006] io scheduler noop registered
[ 2.561848] io scheduler deadline registered (default)
[ 2.567705] gpio-export gpio-export: 1 gpio(s) exported
[ 2.573703] Serial: 8250/16550 driver, 16 ports, IRQ sharing enabled
[ 2.583908] console [ttyS0] disabled
[ 2.587559] 1e000c00.uartlite: ttyS0 at MMIO 0x1e000c00 (irq = 18, base_baud = 3125000) is a 16550A
[ 2.596553] console [ttyS0] enabled
[ 2.603406] bootconsole [early0] disabled
[ 2.612364] cacheinfo: Unable to detect cache hierarchy for CPU 0
[ 2.619499] MediaTek Nand driver init, version v2.1 Fix AHB virt2phys error
[ 2.627019] spi-mt7621 1e000b00.spi: sys_freq: 220000000
[ 2.633248] m25p80 spi0.0: mx25l12805d (16384 Kbytes)
[ 2.638392] 4 fixed-partitions partitions found on MTD device spi0.0
[ 2.644713] Creating 4 MTD partitions on "spi0.0":
[ 2.649528] 0x000000000000-0x000000030000 : "bootloader"
[ 2.655997] 0x000000030000-0x000000040000 : "config"
[ 2.662200] 0x000000040000-0x000000050000 : "factory"
[ 2.668554] 0x000000050000-0x000001000000 : "firmware"
[ 2.675156] 2 uimage-fw partitions found on MTD device firmware
[ 2.681134] Creating 2 MTD partitions on "firmware":
[ 2.686095] 0x000000000000-0x0000001fe5ff : "kernel"
[ 2.692313] 0x0000001fe5ff-0x000000fb0000 : "rootfs"
[ 2.698376] mtd: device 5 (rootfs) set to be root filesystem
[ 2.704141] 1 squashfs-split partitions found on MTD device rootfs
[ 2.710376] 0x0000003a0000-0x000000fb0000 : "rootfs_data"
[ 2.717690] libphy: Fixed MDIO Bus: probed
[ 2.788520] libphy: mdio: probed
[ 4.192213] mtk_soc_eth 1e100000.ethernet: loaded mt7530 driver
[ 4.198993] mtk_soc_eth 1e100000.ethernet eth0: mediatek frame engine at 0xbe100000, irq 21
[ 4.210155] NET: Registered protocol family 10
[ 4.216367] Segment Routing with IPv6
[ 4.220207] NET: Registered protocol family 17
[ 4.224726] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
[ 4.237642] 8021q: 802.1Q VLAN Support v1.8
[ 4.244507] hctosys: unable to open rtc device (rtc0)
[ 4.255947] VFS: Mounted root (squashfs filesystem) readonly on device 31:5.
[ 4.263581] Freeing unused kernel memory: 224K
[ 4.268066] This architecture does not have kernel memory protection.
[ 4.515115] mtk_soc_eth 1e100000.ethernet eth0: port 4 link up
[ 4.876070] init: Console is alive
[ 4.879795] init: - watchdog -
[ 5.536265] kmodloader: loading kernel modules from /etc/modules-boot.d/

[ 5.665282] usbcore: registered new interface driver usbfs
[ 5.670914] usbcore: registered new interface driver hub
[ 5.676384] usbcore: registered new device driver usb
[ 5.690693] SCSI subsystem initialized
[ 5.706690] libata version 3.00 loaded.
[ 5.709965] bus=0x1, slot = 0x0, irq=0x0
[ 5.713918] ahci 0000:01:00.0: version 3.0
[ 5.713942] PCI: Enabling device 0000:00:00.0 (0004 -> 0006)
[ 5.719788] ahci 0000:01:00.0: SSS flag set, parallel bus scan disabled
[ 5.726474] ahci 0000:01:00.0: AHCI 0001.0200 32 slots 2 ports 6 Gbps 0x3 impl SATA mode
[ 5.734541] ahci 0000:01:00.0: flags: 64bit ncq sntf stag led clo pmp pio slum part ccc sxs
[ 5.745445] scsi host0: ahci
[ 5.749197] scsi host1: ahci
[ 5.752450] ata1: SATA max UDMA/133 abar m512@0x60000000 port 0x60000100 irq 23
[ 5.759803] ata2: SATA max UDMA/133 abar m512@0x60000000 port 0x60000180 irq 23
[ 6.106494] ata1: SATA link down (SStatus 0 SControl 300)
[ 6.126958] mtk_soc_eth 1e100000.ethernet eth0: port 0 link up
[ 6.446478] ata2: SATA link down (SStatus 0 SControl 300)
[ 6.458505] xhci-mtk 1e1c0000.xhci: 1e1c0000.xhci supply vbus not found, using dummy regulator
[ 6.467271] xhci-mtk 1e1c0000.xhci: 1e1c0000.xhci supply vusb33 not found, using dummy regulator
[ 6.476214] xhci-mtk 1e1c0000.xhci: xHCI Host Controller
[ 6.481568] xhci-mtk 1e1c0000.xhci: new USB bus registered, assigned bus number 1
[ 6.496644] xhci-mtk 1e1c0000.xhci: hcc params 0x01401198 hci version 0x96 quirks 0x0000000000210010
[ 6.505828] xhci-mtk 1e1c0000.xhci: irq 20, io mem 0x1e1c0000
[ 6.512697] hub 1-0:1.0: USB hub found
[ 6.516595] hub 1-0:1.0: 2 ports detected
[ 6.521296] xhci-mtk 1e1c0000.xhci: xHCI Host Controller
[ 6.526674] xhci-mtk 1e1c0000.xhci: new USB bus registered, assigned bus number 2
[ 6.534140] xhci-mtk 1e1c0000.xhci: Host supports USB 3.0 SuperSpeed
[ 6.540766] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
[ 6.549789] hub 2-0:1.0: USB hub found
[ 6.553618] hub 2-0:1.0: 1 port detected
[ 6.630771] kmodloader: done loading kernel modules from /etc/modules-boot.d/*
[ 6.656894] init: - preinit -
[ 6.766843] mmc0: new high speed SD card at address b368
[ 6.773330] mmcblk0: mmc0:b368 UD 487 MiB
[ 6.779944] mmcblk0: p1
[ 7.515441] mtk_soc_eth 1e100000.ethernet: PPE started
[ 7.597830] random: procd: uninitialized urandom read (4 bytes read)
[ 10.947501] jffs2: notice: (535) jffs2_build_xattr_subsystem: complete building xattr subsystem, 10 of xdatum (3 unchecked, 7 orphan) and 71 of xref (7 dead, 0 orphan) found.
[ 10.987902] mount_root: loading kmods from internal overlay
[ 11.852189] kmodloader: loading kernel modules from /tmp/overlay/upper/etc/modules-boot.d/*
[ 12.234133] usbcore: registered new interface driver usb-storage
[ 12.246044] usbcore: registered new interface driver uas
[ 12.251705] kmodloader: done loading kernel modules from /tmp/overlay/upper/etc/modules-boot.d/*
[ 12.557371] block: attempting to load /tmp/jffs_cfg/upper/etc/config/fstab
[ 12.569877] block: extroot: not configured
[ 12.607865] mount_root: switching to jffs2 overlay
[ 12.630565] overlayfs: upper fs does not support tmpfile.
[ 12.641521] urandom-seed: Seeding with /etc/urandom.seed
[ 12.753264] mtk_soc_eth 1e100000.ethernet: 0x100 = 0x6060000c, 0x10c = 0x80818
[ 12.781923] procd: - early -
[ 12.784913] procd: - watchdog -
[ 12.926020] random: crng init done
[ 13.381827] EXT4-fs (mmcblk0p1): warning: maximal mount count reached, running e2fsck is recommended
[ 13.397321] EXT4-fs (mmcblk0p1): recovery complete
[ 13.402133] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts:
[ 13.496761] procd: - watchdog -
[ 13.500452] procd: - ubus -
[ 13.584178] procd: - init -
[ 14.215181] urngd: v1.0.0 started.
[ 14.227110] kmodloader: loading kernel modules from /etc/modules.d/*
[ 14.245448] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 14.257699] Mirror/redirect action on
[ 14.279894] u32 classifier
[ 14.282639] input device check on
[ 14.286292] Actions configured
[ 14.321189] nf_conntrack version 0.5.0 (4096 buckets, 16384 max)
[ 14.350722] Loading modules backported from Linux version v4.19.32-0-g3a2156c839c7
[ 14.358349] Backport generated by backports.git v4.19.32-1-0-g1c4f7569
[ 14.367738] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 14.472422] xt_time: kernel timezone is -0000
[ 15.093750] bus=0x2, slot = 0x1, irq=0xff
[ 15.097887] PCI: Enabling device 0000:00:01.0 (0004 -> 0006)
[ 15.103718] mt76x2e 0000:02:00.0: ASIC revision: 76120044
[ 15.800462] mt76x2e 0000:02:00.0: ROM patch build: 20141115060606a
[ 15.902849] mt76x2e 0000:02:00.0: Firmware Version: 0.0.00
[ 15.908364] mt76x2e 0000:02:00.0: Build: 1
[ 15.912441] mt76x2e 0000:02:00.0: Build Time: 201507311614____
[ 15.936490] mt76x2e 0000:02:00.0: Firmware running!
[ 15.944597] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[ 15.953566] PPP generic driver version 2.4.2
[ 15.959669] NET: Registered protocol family 24
[ 15.967692] kmodloader: done loading kernel modules from /etc/modules.d/*
[ 22.725723] mtk_soc_eth 1e100000.ethernet: PPE started
[ 22.739771] br-lan: port 1(eth0.1) entered blocking state
[ 22.745237] br-lan: port 1(eth0.1) entered disabled state
[ 22.751764] device eth0.1 entered promiscuous mode
[ 22.756984] device eth0 entered promiscuous mode
[ 22.765609] br-lan: port 1(eth0.1) entered blocking state
[ 22.771119] br-lan: port 1(eth0.1) entered forwarding state
[ 22.777397] IPv6: ADDRCONF(NETDEV_UP): br-lan: link is not ready
[ 23.727457] IPv6: ADDRCONF(NETDEV_CHANGE): br-lan: link becomes ready
[ 26.313797] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 26.324622] br-lan: port 2(wlan0) entered blocking state
[ 26.330008] br-lan: port 2(wlan0) entered disabled state
[ 26.335972] device wlan0 entered promiscuous mode
[ 91.194176] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 91.200949] br-lan: port 2(wlan0) entered blocking state
[ 91.206256] br-lan: port 2(wlan0) entered forwarding state

@Djfe
Copy link
Contributor

Djfe commented May 24, 2023

I'm fairly certain, that "PCIE2 no card" is not an error on ramips-mt7621 but expected behavior.
88d76bb

@sinancetinkaya
Copy link

Can be closed since it has been solved long ago

Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment
Labels
Projects
None yet
Development

No branches or pull requests

3 participants