ynezz:

Please try the latest snapshot image from http://downloads.openwrt.org/snapshots/targets/kirkwood/generic/ and request reopen of this task if you don't have all 10 LEDs available
https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/tree/arch/arm/boot/dts/kirkwood-goflexnet.dts?h=v4.14.123#n88

inator:

Thanks for your reply. It looks like the LEDs are there with snapshot firmware.

Sadly, Serial connection is required to upgrade the box.

root@OpenWrt:~# cat /etc/banner

OpenWrt SNAPSHOT, r10128-ef7aa03

root@OpenWrt:# ls -lha /sys/class/leds/
drwxr-xr-x 2 root root 0 Jan 1 1970 .
drwxr-xr-x 33 root root 0 Jan 1 1970 ..
lrwxrwxrwx 1 root root 0 Jan 1 1970 status:green:health -> ../../devices/platform/gpio-leds/leds/status:green:health
lrwxrwxrwx 1 root root 0 Jan 1 1970 status:orange:fault -> ../../devices/platform/gpio-leds/leds/status:orange:fault
lrwxrwxrwx 1 root root 0 Jan 1 1970 status:white:left0 -> ../../devices/platform/gpio-leds/leds/status:white:left0
lrwxrwxrwx 1 root root 0 Jan 1 1970 status:white:left1 -> ../../devices/platform/gpio-leds/leds/status:white:left1
lrwxrwxrwx 1 root root 0 Jan 1 1970 status:white:left2 -> ../../devices/platform/gpio-leds/leds/status:white:left2
lrwxrwxrwx 1 root root 0 Jan 1 1970 status:white:left3 -> ../../devices/platform/gpio-leds/leds/status:white:left3
lrwxrwxrwx 1 root root 0 Jan 1 1970 status:white:right0 -> ../../devices/platform/gpio-leds/leds/status:white:right0
lrwxrwxrwx 1 root root 0 Jan 1 1970 status:white:right1 -> ../../devices/platform/gpio-leds/leds/status:white:right1
lrwxrwxrwx 1 root root 0 Jan 1 1970 status:white:right2 -> ../../devices/platform/gpio-leds/leds/status:white:right2
lrwxrwxrwx 1 root root 0 Jan 1 1970 status:white:right3 -> ../../devices/platform/gpio-leds/leds/status:white:right3
root@OpenWrt:# uname -r
4.14.123

inator:

Hi !

I have installed the latest version (OpenWrt 18.06.4, r7808-ef686b7292).
It was released on 1st July 2019, if I am correct.

LEDs still have the same behaviour like on my first try (OpenWRT 18.06.2, r7676-cddd7b4c77)

In which stable version can I expect the new behaviour to be implimented ?

ynezz:

In which stable version can I expect the new behaviour to be implimented ?

Hopefully the next one, 19.07.

inator:

Hello !
I have tested Openwrt 19.07.0 RC1 today.

Sadly, the changes were not implemented, korrect ?

inator:

I have made the upgrade via sysupgrade, not via komplete new flashing with serial/tftp.
But this should not make a difference, korrect ?
(Login Banner displays 19.07.0 RC1)

inator:

Ah !

Just installed OpenWrt 19.07.0-rc2, r10775-db8345d8e4 via sysupgrade.

LEDs are there !

Thx a lot !