- Status Closed
- Percent Complete
- Task Type Bug Report
- Category Base system
- Assigned To No-one
- Operating System All
- Severity Low
- Priority Very Low
- Reported Version Trunk
- Due in Version Undecided
-
Due Date
Undecided
- Private
Attached to Project: OpenWrt/LEDE Project
Opened by Samuel Progin - 08.05.2019
Last edited by Yousong Zhou - 01.11.2019
Opened by Samuel Progin - 08.05.2019
Last edited by Yousong Zhou - 01.11.2019
FS#2275 - Dropbear: compilation fails with Elliptic curve cryptography (ECC) activated on master
Supply the following if possible:
- Device problem occurs on
at least on
x86
x86_64
Generic
and
Broadcom BCM47xx/53xx (MIPS)
Generic
Linksys E3000 v1
- Software versions of OpenWrt/LEDE release, packages, etc.
Openwrt master (commit bc85640cdc9de180da00fde1532584abf19db365)
- Steps to reproduce
build OpenWRT with Dropbear/ECC enabled
See attached txt for full error log. It looks like a missing library.
config.seed
Closed by Yousong Zhou
01.11.2019 07:03
Reason for closing: Fixed
Additional comments about closing:
01.11.2019 07:03
Reason for closing: Fixed
Additional comments about closing:
It failed because config changed but relevant codes were not rebuilt.
Should be fixed in https://g it.openwrt.org/?p=openwrt/openwrt.git;a= commitdiff;h=289d532ddd9427a9071d85966d3 8fff9d78837bd
Thanks for the heads-up