Skip to content
New issue

Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.

By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.

Already on GitHub? Sign in to your account

FS#2250 - No wireless interface on D-Link DSL-2740B F1 #7135

Open
openwrt-bot opened this issue Apr 23, 2019 · 0 comments
Open

FS#2250 - No wireless interface on D-Link DSL-2740B F1 #7135

openwrt-bot opened this issue Apr 23, 2019 · 0 comments
Labels

Comments

@openwrt-bot
Copy link

msmi:

  • Device problem occurs on D-Link DSL-2740B F1
  • Software versions of OpenWrt/LEDE: OpenWrt 18.06.3 and Trunk

After flashing openwrt there are no wireless interfaces.
More info at:
https://forum.openwrt.org/t/openwrt-18-06-1-dont-show-wifi-wireless-network-and-dont-work/23482/31
https://forum.openwrt.org/t/lost-wireless-option-in-network-panel-after-reset-of-dsl-2740b/27618

[ 0.000000] Linux version 4.14.111 (massy@massy-linux) (gcc version 7.4.0 (OpenWrt GCC 7.4.0 r9885-524810ce6d)) #0 Thu Apr 18 20:34:19 2019
[ 0.000000] Detected Broadcom 0x6328 CPU revision b0
[ 0.000000] CPU frequency is 320 MHz
[ 0.000000] 64MB of RAM installed
[ 0.000000] board_bcm963xx: Boot address 0xb8000000
[ 0.000000] board_bcm963xx: CFE version: 1.0.37-106.5
[ 0.000000] bootconsole [early0] enabled
[ 0.000000] CPU0 revision is: 0002a075 (Broadcom BMIPS4350)
[ 0.000000] board: board name: AW4339U
[ 0.000000] MIPS: machine is D-Link DSL-2740B/DSL-2741B rev F1
[ 0.000000] Determined physical RAM map:
[ 0.000000] memory: 04000000 @ 00000000 (usable)
[ 0.000000] Initrd not found or empty - disabling initrd
[ 0.000000] Primary instruction cache 32kB, VIPT, 4-way, linesize 16 bytes.
[ 0.000000] Primary data cache 32kB, 2-way, VIPT, cache aliases, linesize 16 bytes
[ 0.000000] Zone ranges:
[ 0.000000] Normal [mem 0x0000000000000000-0x0000000003ffffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000000000-0x0000000003ffffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x0000000003ffffff]
[ 0.000000] On node 0 totalpages: 16384
[ 0.000000] free_area_init_node: node 0, pgdat 804e6f20, node_mem_map 81005720
[ 0.000000] Normal zone: 128 pages used for memmap
[ 0.000000] Normal zone: 0 pages reserved
[ 0.000000] Normal zone: 16384 pages, LIFO batch:3
[ 0.000000] random: get_random_bytes called from start_kernel+0x80/0x480 with crng_init=0
[ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=132768
[ 0.000000] pcpu-alloc:
[li]0[/li]
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 16256
[ 0.000000] Kernel command line: rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200
[ 0.000000] PID hash table entries: 256 (order: -2, 1024 bytes)
[ 0.000000] Dentry cache hash table entries: 8192 (order: 3, 32768 bytes)
[ 0.000000] Inode-cache hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Memory: 58348K/65536K available (3856K kernel code, 184K rwdata, 920K rodata, 1304K init, 207K bss, 7188K reserved, 0K cma-reserved)
[ 0.000000] SLUB: HWalign=16, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[ 0.000000] NR_IRQS: 256
[ 0.000000] clocksource: MIPS: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 11945377789 ns
[ 0.000018] sched_clock: 32 bits at 160MHz, resolution 6ns, wraps every 13421772796ns
[ 0.008126] Calibrating delay loop... 319.74 BogoMIPS (lpj=639488)
[ 0.050493] pid_max: default: 32768 minimum: 301
[ 0.055750] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.062606] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.078151] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[ 0.088199] futex hash table entries: 256 (order: -1, 3072 bytes)
[ 0.094661] pinctrl core: initialized pinctrl subsystem
[ 0.101164] NET: Registered protocol family 16
[ 0.352138] registering PCI controller with io_map_base unset
[ 0.397311] PCI host bridge to bus 0000:00
[ 0.401573] pci_bus 0000:00: root bus resource [mem 0x10f00000-0x10ffffff]
[ 0.408636] pci_bus 0000:00: root bus resource [??? 0x00000000 flags 0x0]
[ 0.415622] pci_bus 0000:00: root bus resource [??? 0x00000000 flags 0x0]
[ 0.422610] pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff]
[ 0.430822] pci 0000:00:00.0: [14e4:6328] type 01 class 0x060400
[ 0.430966] pci 0000:00:00.0: PME# supported from D0 D3hot
[ 0.431429] pci 0000:00:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring
[ 0.440015] pci 0000:01:00.0: [168c:ff1c] type 00 class 0x020000
[ 0.440110] pci 0000:01:00.0: reg 0x10: [mem 0x00000000-0x0000ffff 64bit]
[ 0.440312] pci 0000:01:00.0: supports D1
[ 0.440331] pci 0000:01:00.0: PME# supported from D0 D1 D3hot
[ 0.440765] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01
[ 0.440802] pci_bus 0000:00: busn_res: [bus 00-ff] end is updated to 01
[ 0.440868] pci 0000:00:00.0: BAR 8: assigned [mem 0x10f00000-0x10ffffff]
[ 0.447901] pci 0000:01:00.0: BAR 0: assigned [mem 0x10f00000-0x10f0ffff 64bit]
[ 0.455441] pci 0000:00:00.0: PCI bridge to [bus 01]
[ 0.460538] pci 0000:00:00.0: bridge window [mem 0x10f00000-0x10ffffff]
[ 0.468904] clocksource: Switched to clocksource MIPS
[ 0.476851] NET: Registered protocol family 2
[ 0.483129] TCP established hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.490419] TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.497017] TCP: Hash tables configured (established 1024 bind 1024)
[ 0.504119] UDP hash table entries: 256 (order: 0, 4096 bytes)
[ 0.510235] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[ 0.517260] NET: Registered protocol family 1
[ 0.521862] pci 0000:01:00.0: invalid calibration data
[ 0.527166] PCI: CLS 0 bytes, default 16
[ 0.541917] Crashlog allocated RAM at address 0x3f00000
[ 0.551270] workingset: timestamp_bits=30 max_order=14 bucket_order=0
[ 0.570122] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 0.576154] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
[ 0.614846] io scheduler noop registered
[ 0.618908] io scheduler deadline registered (default)
[ 0.625678] bcm6328-pinctrl 10000080.pin-controller: registered at mmio b0000080
[ 0.634782] PCI: Enabling device 0000:00:00.0 (0000 -> 0002)
[ 0.641659] 10000100.serial: ttyS0 at MMIO 0x10000100 (irq = 36, base_baud = 1562500) is a bcm63xx_uart
[ 0.651409] console [ttyS0] enabled
[ 0.658560] bootconsole [early0] disabled
[ 0.684650] m25p80 spi1.0: mx25l6405d (8192 Kbytes)
[ 0.690467] 4 fixed-partitions partitions found on MTD device spi1.0
[ 0.697027] Creating 4 MTD partitions on "spi1.0":
[ 0.701962] 0x000000000000-0x000000010000 : "cfe"
[ 0.708498] 0x000000010000-0x0000007d0000 : "linux"
[ 0.719371] parser_imagetag: rootfs: CFE image tag found at 0x0 with version 6, board type AW4339U
[ 0.728645] parser_imagetag: Partition 0 is kernel offset 100 and length 1948a4
[ 0.736161] parser_imagetag: Partition 1 is rootfs offset 1949a4 and length 62b65c
[ 0.743949] parser_imagetag: Spare partition is offset 560004 and length 25fffc
[ 0.751546] 2 bcm963xx-imagetag partitions found on MTD device linux
[ 0.758100] Creating 2 MTD partitions on "linux":
[ 0.762943] 0x000000000100-0x0000001949a4 : "kernel"
[ 0.769911] 0x0000001949a4-0x0000007c0000 : "rootfs"
[ 0.776600] mtd: device 3 (rootfs) set to be root filesystem
[ 0.786344] 1 squashfs-split partitions found on MTD device rootfs
[ 0.792769] 0x000000560000-0x0000007c0000 : "rootfs_data"
[ 0.800013] 0x0000007d0000-0x0000007e0000 : "cal_data"
[ 0.806986] 0x0000007e0000-0x000000800000 : "nvram"
[ 0.815813] libphy: Fixed MDIO Bus: probed
[ 0.861967] b53_common: found switch: BCM63xx, rev 0
[ 0.867705] bcm63xx-wdt bcm63xx-wdt: started, timer margin: 30 sec
[ 0.879137] NET: Registered protocol family 10
[ 0.898611] Segment Routing with IPv6
[ 0.902586] NET: Registered protocol family 17
[ 0.907252] 8021q: 802.1Q VLAN Support v1.8
[ 0.921452] VFS: Mounted root (squashfs filesystem) readonly on device 31:3.
[ 0.946284] Freeing unused kernel memory: 1304K
[ 0.950952] This architecture does not have kernel memory protection.
[ 0.968954] random: fast init done
[ 2.161318] init: Console is alive
[ 2.165205] init: - watchdog -
[ 4.118171] kmodloader: loading kernel modules from /etc/modules-boot.d/

[ 4.300774] kmodloader: done loading kernel modules from /etc/modules-boot.d/*
[ 4.310078] init: - preinit -
[ 5.753281] random: jshn: uninitialized urandom read (4 bytes read)
[ 5.853839] random: jshn: uninitialized urandom read (4 bytes read)
[ 6.104203] random: jshn: uninitialized urandom read (4 bytes read)
[ 7.158715] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 7.164974] IPv6: ADDRCONF(NETDEV_UP): eth0.1: link is not ready
[ 7.171876] bcm63xx_enetsw bcm63xx_enetsw.0: link UP on Port 4, 100Mbps, full-duplex
[ 7.180372] IPv6: ADDRCONF(NETDEV_CHANGE): eth0.1: link becomes ready
[ 7.313446] urandom_read: 2 callbacks suppressed
[ 7.313460] random: procd: uninitialized urandom read (4 bytes read)
[ 8.161072] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 10.778473] jffs2: notice: (364) jffs2_build_xattr_subsystem: complete building xattr subsystem, 3 of xdatum (2 unchecked, 1 orphan) and 3 of xref (1 dead, 0 orphan) found.
[ 10.798238] mount_root: switching to jffs2 overlay
[ 10.870423] overlayfs: upper fs does not support tmpfile.
[ 10.892702] urandom-seed: Seeding with /etc/urandom.seed
[ 11.134674] procd: - early -
[ 11.137979] procd: - watchdog -
[ 11.893798] procd: - watchdog -
[ 11.897578] procd: - ubus -
[ 12.039719] random: ubusd: uninitialized urandom read (4 bytes read)
[ 12.153115] random: ubusd: uninitialized urandom read (4 bytes read)
[ 12.160660] random: ubusd: uninitialized urandom read (4 bytes read)
[ 12.170116] procd: - init -
[ 12.762559] kmodloader: loading kernel modules from /etc/modules.d/*
[ 12.783453] tun: Universal TUN/TAP device driver, 1.6
[ 12.920841] gre: GRE over IPv4 demultiplexor driver
[ 12.931260] ip_gre: GRE over IPv4 tunneling driver
[ 12.960508] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 12.981808] Mirror/redirect action on
[ 13.010683] u32 classifier
[ 13.013531] input device check on
[ 13.017267] Actions configured
[ 13.055615] nf_conntrack version 0.5.0 (1024 buckets, 4096 max)
[ 13.099776] Loading modules backported from Linux version v4.19.32-0-g3a2156c839c7
[ 13.107613] Backport generated by backports.git v4.19.32-1-0-g1c4f7569
[ 13.137507] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 13.621957] xt_time: kernel timezone is -0000
[ 13.928446] PPP generic driver version 2.4.2
[ 13.951839] PPP MPPE Compression module registered
[ 13.965547] NET: Registered protocol family 24
[ 14.252600] kmodloader: done loading kernel modules from /etc/modules.d/*
[ 17.533085] random: crng init done
[ 17.536535] random: 1 urandom warning(s) missed due to ratelimiting
[ 33.485194] bcm63xx_enetsw bcm63xx_enetsw.0: link UP on Port 4, 100Mbps, full-duplex
[ 33.509892] br-lan: port 1(eth0.1) entered blocking state
[ 33.515487] br-lan: port 1(eth0.1) entered disabled state
[ 33.521654] device eth0.1 entered promiscuous mode
[ 33.526610] device eth0 entered promiscuous mode
[ 33.583926] br-lan: port 1(eth0.1) entered blocking state
[ 33.589518] br-lan: port 1(eth0.1) entered forwarding state
[ 33.595584] IPv6: ADDRCONF(NETDEV_UP): br-lan: link is not ready
[ 34.498177] IPv6: ADDRCONF(NETDEV_CHANGE): br-lan: link becomes ready

Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment
Labels
Projects
None yet
Development

No branches or pull requests

1 participant