New issue
Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.
By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.
Already on GitHub? Sign in to your account
FS#2240 - Lantiq: AVM FRITZ!Box 7320 only one ETH port is working #7125
Comments
Rixer: ETH1 is working only when connected on boot. ETH2 is not visible. |
ynezz: Do you know last working version/commit? |
Rixer: Unfortunately, I do not know the version that works correctly. I tested OpenWrt 18.06.2 and LEDE 17.01.6. In these versions, the same problem occurs. If you want, I can test OpenWrt 15.05 also. |
ynezz:
I've looked at the 15.05 bootlogs https://openwrt.org/toh/avm/avm_fritz_box_7320 and there's only eth0, so it seems like the 2nd port isn't supported for some reason since the beginning (maybe the driver included in OpenWrt doesn't have support for it), although the vendor firmware supports it. |
everloop2: update: sorry false positive - FritzBox7320 has other network controllers. there are 2 Lantiq PEF7071V V1.3 NICs (LAN1 and LAN2) LAN1 is working, LAN2 does not work. 2nd LAN port would be nice im no coder - played around with /firmware/openwrt/target/linux/lantiq/files-4.14/arch/mips/boot/dts/FRITZ7320.dts ,no luck so far following belongs to FritzBox7330SL: //(search for ar8035 & ar8030 datasheet) LAN1 > Atheros AR8035
LAN2 > Atheros AR8030-A, SK4P7.4D 1242 CN
[[https://openwrt.org/toh/views/toh_admin_vlan?dataflt[Brand*~]=avm|Is there an internal switch?]] OEM_EVA_AVM bootlog: OpenWrt patches: Dont know if its already upstream: This patch Atheros phy AR8035-A switch support (Philippe DUCHEIN, 4 years ago) https://openwrt-devel.openwrt.narkive.com/l08xHWo0/patch-atheros-ar8035-a-support OpenWrt ar8035 patches https://git.openwrt.org/?p=openwrt%2Fopenwrt.git&a=search&h=HEAD&st=commit&s=ar8035 dual-PHY-on-single-MDIO-bus?// |
rabbit83ka: On OpenWRT 19.07.1, on a Fritzbox 7330, ETH2 still isn't working and ETH1 has to be connected on boot to work. |
delight: I can confirm that for OpenWrt 19.07.2 on Fritzbox 7320 |
rabbit83ka: [[https://github.com/freifunk-gluon/gluon/issues/1943#issuecomment-610943676|Here]] is a fix for LAN1 to work also when not connected during boot which has to be tested. |
everloop2: Confirmed: OpenWRT Snapshot (2020.04.04), on a Fritzbox 7320, ETH2 isn't working. ETH1 has to be connected on boot to work. edit: 7330 -> 7320 |
Rixer:
Router has 2 ethernet ports, but the only first one is working.
The text was updated successfully, but these errors were encountered: