OpenWrt/LEDE Project

  • Status Closed
  • Percent Complete
  • Task Type Bug Report
  • Category Base system
  • Assigned To No-one
  • Operating System All
  • Severity Low
  • Priority Very Low
  • Reported Version openwrt-18.06
  • Due in Version Undecided
  • Due Date Undecided
  • Private
Attached to Project: OpenWrt/LEDE Project
Opened by Damian Janarek - 15.04.2019
Last edited by Mathias Kresin - 07.11.2019

FS#2239 - Internet LED on W8970 Not Working (18.06-SNAPSHOT r7737-6ac061f319)

I compiled from sources 18.06-SNAPSHOT r7737-6ac061f319 and internet LED not working properly. When i restart router it’s not working. The trigger is set to netdev and the device is set to pppoe-wan.

config led 'led_internet'
        option name 'internet'
        option sysfs 'tdw89x0:green:internet'
        option trigger 'netdev'
        option mode 'link tx rx'
        option dev 'pppoe-wan'
        option default '0'

If i restart led service (/etc/init.d/led start) it works ok, but if i restart the network interfaces pppoe-wan the diode goes out until i restart again the led service.

Closed by  Mathias Kresin
07.11.2019 07:31
Reason for closing:  Duplicate
Additional comments about closing:  

Duplicate of  FS#2193 

Damian Janarek commented on 16.04.2019 06:41

I check that the package kmod-ledtrig-netdev is not installed. I try to install them but i can't.

root@OpenWrt:~# opkg install kmod-ledtrig-netdev
Installing kmod-ledtrig-netdev (4.9.168-1) to root...
Collected errors:
 * satisfy_dependencies_for: Cannot satisfy the following dependencies for kmod-ledtrig-netdev:
 *      kernel (= 4.9.168-1-aea142b55ef2b7d4ac9fbda54dc83b38)
 * opkg_install_cmd: Cannot install package kmod-ledtrig-netdev.
root@OpenWrt:~# uname -a
Linux OpenWrt 4.9.168 #0 SMP Thu Apr 11 20:54:45 2019 mips GNU/Linux
Package kernel (4.9.168-1-c8c81c5f3dc15adcf9c6af78d3e1190e) installed in root is up to date.

After this i downloaded the image from Link and the internet diode is not working. After I installed the all packages named kmod-ledtrig but the diode isn't workink correct.

Ahmar commented on 20.04.2019 04:53

Something else is going on with the Internet LED, specially for DSL based modems I guess. I have an issue open here:

The strange thing is that LED turns off when the link gets disconnected but it won't turn on when the link gets connected.

Damian Janarek commented on 22.04.2019 17:07

Maybe the internet stop working after this? In 18.06.2 internet LED working fine, only Wifi LED not working but it was repair in  FS#2232 .;a=commit;h=eea538204bb973d73d3bc3d38947d7f85214d486


I confirmed that internet diode stop working after this change. I compile the latest source and use this file Link and the internet diode working fine. Please repair this.


Available keyboard shortcuts


Task Details

Task Editing