You signed in with another tab or window. Reload to refresh your session.You signed out in another tab or window. Reload to refresh your session.You switched accounts on another tab or window. Reload to refresh your session.Dismiss alert
Mikrotik RB952Ui-5ac2nD (hAP ac lite) not detect board vith boot the rb-nor-flash-16M-ac-initramfs-kernel.bin
The luci web interface is only available on the wan (1) port, port 5 is red.
When I try to update from rb-nor-flash-16M-ac-squashfs-sysupgrade.bin from luci, I get the error “The downloaded image file does not contain a supported format. Make sure you choose a common image format for your platform. "
Also tried using ssh, the image is not recognized.
Device unknown not supported by this image
Supported devices: rb-750-r2 rb-750up-r2 rb-750p-pbr2 rb-911-2hn rb-911-5hn rb-931-2nd rb-941-2nd rb-951ui-2nd rb-952ui-5ac2nd rb- 962uigs-5hact2hnt rb-lhg-5nd rb-map-2nd rb-mapl-2nd rb-wap-2nd rb-wapr-2nd rb-wapg-5hact2hnd
The boot image does not determine the fee, so I had to register it forcibly. root@OpenWrt:~# cat /tmp/sysinfo/board_name unknown
If you force a card, it is flashed normally, but there is no switch configuration and port LEDs. WLAN 5g (QCA9887) does not work, USB does not have a power port, port 5 is lit red (gpio14) it turns off if the gpio value is 0
Pahalan:
Mikrotik RB952Ui-5ac2nD (hAP ac lite) not detect board vith boot the rb-nor-flash-16M-ac-initramfs-kernel.bin
The luci web interface is only available on the wan (1) port, port 5 is red.
When I try to update from rb-nor-flash-16M-ac-squashfs-sysupgrade.bin from luci, I get the error “The downloaded image file does not contain a supported format. Make sure you choose a common image format for your platform. "
Also tried using ssh, the image is not recognized.
Device unknown not supported by this image
Supported devices: rb-750-r2 rb-750up-r2 rb-750p-pbr2 rb-911-2hn rb-911-5hn rb-931-2nd rb-941-2nd rb-951ui-2nd rb-952ui-5ac2nd rb- 962uigs-5hact2hnt rb-lhg-5nd rb-map-2nd rb-mapl-2nd rb-wap-2nd rb-wapr-2nd rb-wapg-5hact2hnd
The boot image does not determine the fee, so I had to register it forcibly.
root@OpenWrt:~# cat /tmp/sysinfo/board_name unknown
If you force a card, it is flashed normally, but there is no switch configuration and port LEDs. WLAN 5g (QCA9887) does not work, USB does not have a power port, port 5 is lit red (gpio14) it turns off if the gpio value is 0
root@OpenWrt:
# echo "rb-952ui-5ac2nd" > /tmp/sysinfo/board_name# cat /tmp/sysinfo/board_name rb-952ui-5ac2ndroot@OpenWrt:
I would like full support for this model, perhaps something is changed on the board.
More detailed studies I left here
https://forum.openwrt.org/t/mikrotik-rb952ui-5ac2nd/33635
The text was updated successfully, but these errors were encountered: