You signed in with another tab or window. Reload to refresh your session.You signed out in another tab or window. Reload to refresh your session.You switched accounts on another tab or window. Reload to refresh your session.Dismiss alert
I have two routers running the latest OpenWrt master trunk version. The first works as router(with dhcp/dns) and another works as pure AP(without dns/dhcp). So far it works fine.
Because I need a guest wifi network, so I added one vlan setting between router and AP with port tagged(VLAN-ID=17), after that, the AP device can not get correct routers's MAC address(it's all ZERO!)
The arp command shows output as following:
root@OpenWrt:/tmp# arp
IP address HW type Flags HW address Mask Device
192.168.10.1 0x1 0x0 00:00:00:00:00:00 * eth0.1
192.168.10.206 0x1 0x2 3c:xx:xx:xx:xx:e3 * eth0.1
root@OpenWrt:/tmp# uname -a
Linux OpenWrt 4.14.107 #0 SMP Mon Mar 25 10:09:12 2019 mips GNU/Linux`
After I give it the corrct MAC address with 'ip neigh' command, it also fails when ping to gateway.
root@OpenWrt:/tmp# ip neigh change 192.168.10.1 lladdr 1C:xx:xx:xx:9B:xx nud permanent dev eth0.1
root@OpenWrt:/tmp# arp
IP address HW type Flags HW address Mask Device
192.168.10.1 0x1 0x6 1c:xx:xx:xx:9b:xx * eth0.1
192.168.10.206 0x1 0x2 3c:xx:xx:xx:xx:e3 * eth0.1
siwind:
I have two routers running the latest OpenWrt master trunk version. The first works as router(with dhcp/dns) and another works as pure AP(without dns/dhcp). So far it works fine.
Because I need a guest wifi network, so I added one vlan setting between router and AP with port tagged(VLAN-ID=17), after that, the AP device can not get correct routers's MAC address(it's all ZERO!)
The arp command shows output as following:
root@OpenWrt:/tmp# arp
IP address HW type Flags HW address Mask Device
192.168.10.1 0x1 0x0 00:00:00:00:00:00 * eth0.1
192.168.10.206 0x1 0x2 3c:xx:xx:xx:xx:e3 * eth0.1
root@OpenWrt:/tmp# uname -a
Linux OpenWrt 4.14.107 #0 SMP Mon Mar 25 10:09:12 2019 mips GNU/Linux`
After I give it the corrct MAC address with 'ip neigh' command, it also fails when ping to gateway.
root@OpenWrt:/tmp# ip neigh change 192.168.10.1 lladdr 1C:xx:xx:xx:9B:xx nud permanent dev eth0.1 root@OpenWrt:/tmp# arp IP address HW type Flags HW address Mask Device 192.168.10.1 0x1 0x6 1c:xx:xx:xx:9b:xx * eth0.1 192.168.10.206 0x1 0x2 3c:xx:xx:xx:xx:e3 * eth0.1
root@OpenWrt:/tmp# ping 192.168.10.1
PING 192.168.10.1 (192.168.10.1): 56 data bytes
^C
--- 192.168.10.1 ping statistics ---
10 packets transmitted, 0 packets received, 100% packet loss
My router type is newifi d2 and TL-WR2041n.
I am sure that it works fine with vlan-guest-network setting in previous version of OpenWrt.
The text was updated successfully, but these errors were encountered: