We read every piece of feedback, and take your input very seriously.
To see all available qualifiers, see our documentation.
Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.
By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.
Already on GitHub? Sign in to your account
sumpfralle:
Failed initialization: [ 11.643912] ath9k 0000:00:00.0: Direct firmware load for ath9k-eeprom-pci-0000:00:00.0.bin failed with error -2 [ 11.654117] ath9k 0000:00:00.0: Falling back to user helper [ 11.867085] firmware ath9k-eeprom-pci-0000:00:00.0.bin: firmware_loading_store: map pages failed [ 11.876934] ath: phy0: Unable to load EEPROM file ath9k-eeprom-pci-0000:00:00.0.bin [ 11.884709] ath9k 0000:00:00.0: Failed to initialize device [ 11.890396] ath9k: probe of 0000:00:00.0 failed with error -22
[ 11.643912] ath9k 0000:00:00.0: Direct firmware load for ath9k-eeprom-pci-0000:00:00.0.bin failed with error -2 [ 11.654117] ath9k 0000:00:00.0: Falling back to user helper [ 11.867085] firmware ath9k-eeprom-pci-0000:00:00.0.bin: firmware_loading_store: map pages failed [ 11.876934] ath: phy0: Unable to load EEPROM file ath9k-eeprom-pci-0000:00:00.0.bin [ 11.884709] ath9k 0000:00:00.0: Failed to initialize device [ 11.890396] ath9k: probe of 0000:00:00.0 failed with error -22
A working initialization (same device, same commit, with ar711xx image): Wed Mar 27 11:10:57 2019 kern.info kernel: [ 16.709837] pci 0000:00:00.0: using irq 40 for pin 1 Wed Mar 27 11:10:57 2019 kern.warn kernel: [ 16.714854] PCI: Enabling device 0000:00:00.0 (0000 -> 0002) Wed Mar 27 11:10:57 2019 kern.info kernel: [ 16.725987] ath: phy0: Ignoring endianness difference in EEPROM magic bytes. Wed Mar 27 11:10:57 2019 kern.debug kernel: [ 16.734629] ath: EEPROM regdomain: 0x0 Wed Mar 27 11:10:57 2019 kern.debug kernel: [ 16.734637] ath: EEPROM indicates default country code should be used Wed Mar 27 11:10:57 2019 kern.debug kernel: [ 16.734642] ath: doing EEPROM country->regdmn map search Wed Mar 27 11:10:57 2019 kern.debug kernel: [ 16.734662] ath: country maps to regdmn code: 0x3a Wed Mar 27 11:10:57 2019 kern.debug kernel: [ 16.734670] ath: Country alpha2 being used: US Wed Mar 27 11:10:57 2019 kern.debug kernel: [ 16.734676] ath: Regpair used: 0x3a Wed Mar 27 11:10:57 2019 kern.debug kernel: [ 16.755563] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht' Wed Mar 27 11:10:57 2019 kern.info kernel: [ 16.758624] ieee80211 phy0: Atheros AR9280 Rev:2 mem=0xb0000000, irq=40
Wed Mar 27 11:10:57 2019 kern.info kernel: [ 16.709837] pci 0000:00:00.0: using irq 40 for pin 1 Wed Mar 27 11:10:57 2019 kern.warn kernel: [ 16.714854] PCI: Enabling device 0000:00:00.0 (0000 -> 0002) Wed Mar 27 11:10:57 2019 kern.info kernel: [ 16.725987] ath: phy0: Ignoring endianness difference in EEPROM magic bytes. Wed Mar 27 11:10:57 2019 kern.debug kernel: [ 16.734629] ath: EEPROM regdomain: 0x0 Wed Mar 27 11:10:57 2019 kern.debug kernel: [ 16.734637] ath: EEPROM indicates default country code should be used Wed Mar 27 11:10:57 2019 kern.debug kernel: [ 16.734642] ath: doing EEPROM country->regdmn map search Wed Mar 27 11:10:57 2019 kern.debug kernel: [ 16.734662] ath: country maps to regdmn code: 0x3a Wed Mar 27 11:10:57 2019 kern.debug kernel: [ 16.734670] ath: Country alpha2 being used: US Wed Mar 27 11:10:57 2019 kern.debug kernel: [ 16.734676] ath: Regpair used: 0x3a Wed Mar 27 11:10:57 2019 kern.debug kernel: [ 16.755563] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht' Wed Mar 27 11:10:57 2019 kern.info kernel: [ 16.758624] ieee80211 phy0: Atheros AR9280 Rev:2 mem=0xb0000000, irq=40
The text was updated successfully, but these errors were encountered:
No branches or pull requests
sumpfralle:
Failed initialization:
[ 11.643912] ath9k 0000:00:00.0: Direct firmware load for ath9k-eeprom-pci-0000:00:00.0.bin failed with error -2
[ 11.654117] ath9k 0000:00:00.0: Falling back to user helper
[ 11.867085] firmware ath9k-eeprom-pci-0000:00:00.0.bin: firmware_loading_store: map pages failed
[ 11.876934] ath: phy0: Unable to load EEPROM file ath9k-eeprom-pci-0000:00:00.0.bin
[ 11.884709] ath9k 0000:00:00.0: Failed to initialize device
[ 11.890396] ath9k: probe of 0000:00:00.0 failed with error -22
A working initialization (same device, same commit, with ar711xx image):
Wed Mar 27 11:10:57 2019 kern.info kernel: [ 16.709837] pci 0000:00:00.0: using irq 40 for pin 1
Wed Mar 27 11:10:57 2019 kern.warn kernel: [ 16.714854] PCI: Enabling device 0000:00:00.0 (0000 -> 0002)
Wed Mar 27 11:10:57 2019 kern.info kernel: [ 16.725987] ath: phy0: Ignoring endianness difference in EEPROM magic bytes.
Wed Mar 27 11:10:57 2019 kern.debug kernel: [ 16.734629] ath: EEPROM regdomain: 0x0
Wed Mar 27 11:10:57 2019 kern.debug kernel: [ 16.734637] ath: EEPROM indicates default country code should be used
Wed Mar 27 11:10:57 2019 kern.debug kernel: [ 16.734642] ath: doing EEPROM country->regdmn map search
Wed Mar 27 11:10:57 2019 kern.debug kernel: [ 16.734662] ath: country maps to regdmn code: 0x3a
Wed Mar 27 11:10:57 2019 kern.debug kernel: [ 16.734670] ath: Country alpha2 being used: US
Wed Mar 27 11:10:57 2019 kern.debug kernel: [ 16.734676] ath: Regpair used: 0x3a
Wed Mar 27 11:10:57 2019 kern.debug kernel: [ 16.755563] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
Wed Mar 27 11:10:57 2019 kern.info kernel: [ 16.758624] ieee80211 phy0: Atheros AR9280 Rev:2 mem=0xb0000000, irq=40
The text was updated successfully, but these errors were encountered: