You signed in with another tab or window. Reload to refresh your session.You signed out in another tab or window. Reload to refresh your session.You switched accounts on another tab or window. Reload to refresh your session.Dismiss alert
Supply the following if possible:
TP-Link Archer C7 2.0
Update from 18.06.1 to 18.06.2 with DS-Lite internet connect
Steps to reproduce
Take a openwrt 18.06.1 router on a ds-lite line and use the 18.06.2 package on it.
After reboot you are offline, because the ds-lite module old was uninstalled and a newer one is missing in the package. You cannot install it, because without ds-lite module you have no IP6 prefix AND no IPv4 through virtual WAN6_4 module. The ds-lite must be installed someway with an usb-key and a friendly neighbor with working internet connection to get it on the stick.
This is a grave functionality bug.
The text was updated successfully, but these errors were encountered:
This problem applies to any case where extra packages are required to get connectivity. If you require nonstandard packages to have working connectivity, it is adviced to produce custom firmware images containing everything needed from the get-go, precisely to avoid the sysupgrade problem.
LinuxfarmerHH:
Supply the following if possible:
TP-Link Archer C7 2.0
Update from 18.06.1 to 18.06.2 with DS-Lite internet connect
Take a openwrt 18.06.1 router on a ds-lite line and use the 18.06.2 package on it.
After reboot you are offline, because the ds-lite module old was uninstalled and a newer one is missing in the package. You cannot install it, because without ds-lite module you have no IP6 prefix AND no IPv4 through virtual WAN6_4 module. The ds-lite must be installed someway with an usb-key and a friendly neighbor with working internet connection to get it on the stick.
This is a grave functionality bug.
The text was updated successfully, but these errors were encountered: