- Status Closed
- Percent Complete
- Task Type Bug Report
- Category Base system
- Assigned To No-one
- Operating System All
- Severity High
- Priority Very Low
- Reported Version openwrt-18.06
- Due in Version Undecided
-
Due Date
Undecided
- Private
Attached to Project: OpenWrt/LEDE Project
Opened by Thomas Munn - 06.03.2019
Last edited by Yousong Zhou - 22.07.2020
Opened by Thomas Munn - 06.03.2019
Last edited by Yousong Zhou - 22.07.2020
FS#2166 - Openwrt 18.06.2 build fails when ext4 is not chosen as output format
upply the following if possible:
- Raspberry Pi Zero
- 18.06.2
- Go into menu, choose only ‘squashfs’ with defaults and bcm2708 as target. The ‘rootfs’ option disappears, and the build script fails with make world:
Output follows:
./gen_rpi_sdcard_img.sh /data/openwrt/build_dir/target-arm_arm1176jzf-s+vfp_musl_eabi/linux-brcm2708_bcm2708/tmp/openwrt-brcm2708-bcm2708-rpi-squashfs-factory.img.gz /data/openwrt/build_dir/target-arm_arm1176jzf-s+vfp_musl_eabi/linux-brcm2708_bcm2708/tmp/openwrt-brcm2708-bcm2708-rpi-squashfs-factory.img.gz.boot /data/openwrt/build_dir/target-arm_arm1176jzf-s+vfp_musl_eabi/linux-brcm2708_bcm2708/root.squashfs 20 + '[' 4 -eq 5 ']' + echo 'SYNTAX: ./gen_rpi_sdcard_img.sh <file> <bootfs image> <rootfs image> <bootfs size> <rootfs size>' SYNTAX: ./gen_rpi_sdcard_img.sh <file> <bootfs image> <rootfs image> <bootfs size> <rootfs size>
Looks like the script isn’t passing proper paramaters unless I select ext4 image as well as squashfs image.
Closed by Yousong Zhou
22.07.2020 08:07
Reason for closing: Fixed
Additional comments about closing:
22.07.2020 08:07
Reason for closing: Fixed
Additional comments about closing:
Should be fixed now. https:/ /git.openwrt.org/0880275d5ee36b006a0501d c9eb9f4d5c953dcb5
This should now be fixed by backport in commit https://git.openwrt.org/?p=openwrt/openwrt.git;a=commitdiff;h=0880275d5ee36b006a0501dc9eb9f4d5c953dcb5